Add support for "panStamp" boards // Resolve #117

examples/atmelavr-and-arduino/panstamp-blink/README.rst

@@ -0,0 +1,21 @@
+How to buid PlatformIO based project
+====================================
+
+1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
+2. Download `source code with examples <https://github.com/ivankravets/platformio/archive/develop.zip>`_
+3. Extract ZIP archive
+4. Run these commands:
+
+.. code-block:: bash
+
+    # Change directory to example
+    > cd platformio-develop/examples/atmelavr-and-arduino/panstamp-blink
+
+    # Process example project
+    > platformio run
+
+    # Upload firmware
+    > platformio run --target upload
+
+    # Clean build files
+    > platformio run --target clean

examples/atmelavr-and-arduino/panstamp-blink/platformio.ini

@@ -0,0 +1,23 @@
+#
+# Project Configuration File
+#
+# A detailed documentation with the EXAMPLES is located here:
+# http://docs.platformio.org/en/latest/projectconf.html
+#
+
+# A sign `#` at the beginning of the line indicates a comment
+# Comment lines are ignored.
+
+# Simple and base environment
+# [env:mybaseenv]
+# platform = %INSTALLED_PLATFORM_NAME_HERE%
+# framework =
+# board =
+#
+# Automatic targets - enable auto-uploading
+# targets = upload
+
+[env:panStampAVR]
+platform = atmelavr
+framework = arduino
+board = panStampAVR

examples/atmelavr-and-arduino/panstamp-blink/src/Blink.ino

@@ -0,0 +1,29 @@
+/*
+  Blink
+  Turns on an LED on for one second, then off for one second, repeatedly.
+
+  Most Arduinos have an on-board LED you can control. On the Uno and
+  Leonardo, it is attached to digital pin 13. If you're unsure what
+  pin the on-board LED is connected to on your Arduino model, check
+  the documentation at http://arduino.cc
+
+  This example code is in the public domain.
+
+  modified 8 May 2014
+  by Scott Fitzgerald
+ */
+
+
+// the setup function runs once when you press reset or power the board
+void setup() {
+  // initialize digital pin 13 as an output.
+  pinMode(13, OUTPUT);
+}
+
+// the loop function runs over and over again forever
+void loop() {
+  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(1000);              // wait for a second
+  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
+  delay(1000);              // wait for a second
+}

examples/timsp430/panstamp-blink/README.rst

@@ -0,0 +1,21 @@
+How to buid PlatformIO based project
+====================================
+
+1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
+2. Download `source code with examples <https://github.com/ivankravets/platformio/archive/develop.zip>`_
+3. Extract ZIP archive
+4. Run these commands:
+
+.. code-block:: bash
+
+    # Change directory to example
+    > cd platformio-develop/examples/timsp430/panstamp-blink
+
+    # Process example project
+    > platformio run
+
+    # Upload firmware
+    > platformio run --target upload
+
+    # Clean build files
+    > platformio run --target clean

examples/timsp430/panstamp-blink/platformio.ini

@@ -0,0 +1,23 @@
+#
+# Project Configuration File
+#
+# A detailed documentation with the EXAMPLES is located here:
+# http://docs.platformio.org/en/latest/projectconf.html
+#
+
+# A sign `#` at the beginning of the line indicates a comment
+# Comment lines are ignored.
+
+# Simple and base environment
+# [env:mybaseenv]
+# platform = %INSTALLED_PLATFORM_NAME_HERE%
+# framework =
+# board =
+#
+# Automatic targets - enable auto-uploading
+# targets = upload
+
+[env:panStampNRG]
+platform = timsp430
+framework = arduino
+board = panStampNRG

examples/timsp430/panstamp-blink/src/Blink.ino

@@ -0,0 +1,29 @@
+/*
+  Blink
+  Turns on an LED on for one second, then off for one second, repeatedly.
+
+  Most Arduinos have an on-board LED you can control. On the Uno and
+  Leonardo, it is attached to digital pin 13. If you're unsure what
+  pin the on-board LED is connected to on your Arduino model, check
+  the documentation at http://arduino.cc
+
+  This example code is in the public domain.
+
+  modified 8 May 2014
+  by Scott Fitzgerald
+ */
+
+
+// the setup function runs once when you press reset or power the board
+void setup() {
+  // initialize digital pin 13 as an output.
+  pinMode(13, OUTPUT);
+}
+
+// the loop function runs over and over again forever
+void loop() {
+  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(1000);              // wait for a second
+  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
+  delay(1000);              // wait for a second
+}

platformio/boards/misc.json

@@ -75,5 +75,44 @@
         },
         "url": "http://www.sainsmart.com/arduino/control-boards/sainsmart-due-atmel-sam3x8e-arm-cortex-m3-board-black.html",
         "vendor": "SainSmart"
+    },
+    "panStampAVR": {
+        "build": {
+            "core": "panstamp",
+            "extra_flags": "-DPANSTAMP_AVR",
+            "f_cpu": "8000000L",
+            "mcu": "atmega328p",
+            "variant": "panstamp"
+        },
+        "frameworks": ["arduino"],
+        "name": "PanStamp AVR",
+        "platform": "atmelavr",
+        "upload": {
+            "maximum_ram_size": 2048,
+            "maximum_size": 32256,
+            "protocol": "arduino",
+            "require_upload_port" : true,
+            "speed": 57600
+        },
+        "url": "http://www.panstamp.com/product/panstamp-avr/",
+        "vendor": "PanStamp"
+    },
+    "panStampNRG": {
+        "build": {
+            "core": "panstamp",
+            "f_cpu": "12000000L",
+            "mcu": "cc430f5137",
+            "variant": "panstamp_nrg_1.1"
+        },
+        "frameworks": ["arduino"],
+        "name": "PanStamp NRG 1.1",
+        "platform": "timsp430",
+        "upload": {
+            "maximum_ram_size": 4096,
+            "maximum_size": 32640,
+            "protocol": "flash-bsl"
+        },
+        "url": "http://www.panstamp.com/product/197/",
+        "vendor": "PanStamp"
     }
 }

platformio/builder/scripts/frameworks/arduino.py

@@ -29,12 +29,17 @@
 PLATFORMFW_DIR = join("$PIOPACKAGES_DIR",
                       "framework-arduino${PLATFORM.replace('atmel', '')}")
 
-if env.get("PLATFORM") == "digistump":
+if "digispark" in BOARD_BUILDOPTS.get("core"):
     PLATFORMFW_DIR = join(
         "$PIOPACKAGES_DIR",
         "framework-arduino%s" % (
             "sam" if BOARD_BUILDOPTS.get("cpu") == "cortex-m3" else "avr")
     )
+elif env.get("PLATFORM") == "timsp430":
+    PLATFORMFW_DIR = join(
+        "$PIOPACKAGES_DIR",
+        "framework-arduinomsp430"
+    )
 
 env.Replace(PLATFORMFW_DIR=PLATFORMFW_DIR)
 

platformio/platforms/base.py

@@ -26,6 +26,10 @@
         ("Arduino Wiring-based Framework",
          "http://arduino.cc/en/Reference/HomePage")
     ],
+    "framework-arduinomsp430": [
+        ("Arduino Wiring-based Framework (MSP430 Core)",
+         "http://arduino.cc/en/Reference/HomePage")
+    ],
     "framework-energiamsp430": [
         ("Energia Wiring-based Framework (MSP430 Core)",
          "http://energia.nu/reference/")

platformio/platforms/timsp430.py

@@ -29,6 +29,10 @@ class Timsp430Platform(BasePlatform):
 
         "framework-energiamsp430": {
             "default": True
+        },
+
+        "framework-arduinomsp430": {
+            "default": True
         }
     }