Transmitting without active prim freq when mentoring #5
Comments
|
Yes, just manually add the call sign of the actual station that is
controlling. As long as you are not connected as an observer it should work
fine.
If it does not it might be because you would be using an obs frequency.
I’ll check the code. In the meantime you can just create a fake frequency
like 189.99 and prim that
…On Fri, 19 Apr 2024 at 09:07, Max Larsson Kuhla ***@***.***> wrote:
As a mentor it is normally not desired to activate prim freq, would there
be any chance to enable transmitting on frequencies also without active
prim freq when logged on as a controller facility?
—
Reply to this email directly, view it on GitHub
<#5>, or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAN7UKZPJ2LGJGI55PBX7ZTY6E6LPAVCNFSM6AAAAABGPOJMUOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGI2TGMZXGI3DENY>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
|
I was logged on as ESOS_M_CTR, adding ESOS_3_CTR in TrackAudio, the TX was greyed out untill I activated any prim freq in Euroscope. |
|
I'm afraid for now, due to how AFV works with regards to detecting positions, you will need to set a frequency, any that is not the default observer frequency |
|
In the AFV client your OBS position is shown as 199.998. |
|
Yes, I know - I won’t be able to do it in the same manner with
TrackAudio/VectorAudio, but could add a rule if you connect with a _M_
callsign, would that work?
…On Wed, 24 Apr 2024 at 04:24, Max Larsson Kuhla ***@***.***> wrote:
In the AFV client your OBS position is shown as 199.998.
You can then just add the the desired position, you are able to activate
both RX and TX for that newly added position.
—
Reply to this email directly, view it on GitHub
<#5 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAN7UKY6TFCXV44AY53B6MLY65T43AVCNFSM6AAAAABGPOJMUOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZUGM3TMNJZGY>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
|
That would definitely be of help. Thank you! |
|
Still unable to activate TX on 1.0.2b2 |
|
Did you enable RX first ? The TX button will not be available until you
click RX. I’ll take a look.
…On Mon, 29 Apr 2024 at 12:44, Max Larsson Kuhla ***@***.***> wrote:
Still unable to activate TX on 1.0.2b2
Online as ESMM_M_CTR without primary freq and trying to activate
ESMM_5_CTR in TrackAudio
—
Reply to this email directly, view it on GitHub
<#5 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAN7UKZBSW3GDFDBJI7KVR3Y7Z2HPAVCNFSM6AAAAABGPOJMUOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBTGE4TQNZYHE>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***>
|
|
Still having the same issue with 1.0.2b4 |
|
Thanks, will take another look. In the meantime, set a fake frequency of
199.000 or so and it’ll work
…On Fri, 17 May 2024 at 12:53, Max Larsson Kuhla ***@***.***> wrote:
image.png (view on web)
<https://github.com/pierr3/TrackAudio/assets/25370081/27c89608-3faa-46b2-960b-9a51241b4925>
Still having the same issue with 1.0.2b4
TX still remains greyed out after selecting RX.
—
Reply to this email directly, view it on GitHub
<#5 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAN7UKYCNWZMMMOU7ZVO56TZCYYXRAVCNFSM6AAAAABGPOJMUOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJYGAYDGNZWHE>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***>
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
As a mentor it is normally not desired to activate prim freq, would there be any chance to enable transmitting on frequencies also without active prim freq when logged on as a controller facility?
The text was updated successfully, but these errors were encountered: