Non-blocking Redis client with focus on performance and robustness.
Supported Redis features:
- Any command, through eredis:q/2
- Transactions
- Pipelining
- Authentication & multiple dbs
- Pubsub
If you have Redis running on localhost, with default settings, you may copy and paste the following into a shell to try out Eredis:
git clone git://github.com/wooga/eredis.git
cd eredis
./rebar compile
erl -pa ebin/
{ok, C} = eredis:start_link().
{ok, <<"OK">>} = eredis:q(C, ["SET", "foo", "bar"]).
{ok, <<"bar">>} = eredis:q(C, ["GET", "foo"]).
MSET and MGET:
KeyValuePairs = ["key1", "value1", "key2", "value2", "key3", "value3"].
{ok, <<"OK">>} = eredis:q(C, ["MSET" | KeyValuePairs]).
{ok, Values} = eredis:q(C, ["MGET" | ["key1", "key2", "key3"]]).
Transactions:
{ok, <<"OK">>} = eredis:q(C, ["MULTI"]).
{ok, <<"QUEUED">>} = eredis:q(C, ["SET", "foo", "bar"]).
{ok, <<"QUEUED">>} = eredis:q(C, ["SET", "bar", "baz"]).
{ok, [<<"OK">>, <<"OK">>]} = eredis:q(C, ["EXEC"]).
Pipelining:
P1 = [["SET", a, "1"],
["LPUSH", b, "3"],
["LPUSH", b, "2"]].
[{ok, <<"OK">>}, {ok, <<"1">>}, {ok, <<"2">>}] = eredis:qp(C, P1).
Pubsub:
1> eredis_sub:sub_example().
received {subscribed,<<"foo">>,<0.34.0>}
{<0.34.0>,<0.37.0>}
2> eredis_sub:pub_example().
received {message,<<"foo">>,<<"bar">>,<0.34.0>}
Pattern Subscribe:
1> eredis_sub:psub_example().
received {subscribed,<<"foo*">>,<0.33.0>}
{<0.33.0>,<0.36.0>}
2> eredis_sub:ppub_example().
received {pmessage,<<"foo*">>,<<"foo123">>,<<"bar">>,<0.33.0>}
ok
3>
EUnit tests:
./rebar eunit
Eredis has one main function to interact with redis, which is
eredis:q(Client::pid(), Command::iolist())
. The response will either
be {ok, Value::binary() | [binary()]}
or {error, Message::binary()}
. The value is always the exact value returned by
Redis, without any type conversion. If Redis returns a list of values,
this list is returned in the exact same order without any type
conversion.
To send multiple requests to redis in a batch, aka. pipelining
requests, you may use eredis:qp(Client::pid(), [Command::iolist()])
. This function returns {ok, [Value::binary()]}
where the values are the redis responses in the same order as the
commands you provided.
To start the client, use any of the eredis:start_link/0,1,2,3,4,5
functions. They all include sensible defaults. start_link/5
takes
the following arguments:
- Host, dns name or ip adress as string
- Port, integer, default is 6379
- Database, integer or 0 for default database
- Password, string or empty string([]) for no password
- Reconnect sleep, integer of milliseconds to sleep between reconnect attempts
When Eredis for some reason looses the connection to Redis, Eredis
will keep trying to reconnect until a connection is successfully
established, which includes the AUTH
and SELECT
calls. The sleep
time between attempts to reconnect can be set in the
eredis:start_link/5
call.
As long as the connection is down, Eredis will respond to any request
immediately with {error, no_connection}
without actually trying to
connect. This serves as a kind of circuit breaker and prevents a
stampede of clients just waiting for a failed connection attempt or
gen_server:call
timeout.
Note: If Eredis is starting up and cannot connect, it will fail
immediately with {connection_error, Reason}
.
Thanks to Dave Peticolas (jdavisp3), eredis supports
pubsub. eredis_sub
offers a separate client that will forward
channel messages from Redis to an Erlang process in a "active-once"
pattern similar to gen_tcp sockets. After every message sent, the
controlling process must acknowledge receipt using
eredis_sub:ack_message/1
.
If the controlling process does not process messages fast enough, eredis will queue the messages up to a certain queue size controlled by configuration. When the max size is reached, eredis will either drop messages or crash, also based on configuration.
Subscriptions are managed using eredis_sub:subscribe/2
and
eredis_sub:unsubscribe/2
. When Redis acknowledges the change in
subscription, a message is sent to the controlling process for each
channel.
eredis also supports Pattern Subscribe using eredis_sub:psubscribe/2
and eredis_sub:unsubscribe/2
. As with normal subscriptions, a message
is sent to the controlling process for each channel.
Eredis also implements the AUTH and SELECT calls for you. When the
client is started with something else than default values for password
and database, it will issue the AUTH
and SELECT
commands
appropriately, even when reconnecting after a timeout.
Using basho_bench(https://github.com/basho/basho_bench/) you may
benchmark Eredis on your own hardware using the provided config and
driver. See priv/basho_bench_driver_eredis.config
and
src/basho_bench_driver_eredis.erl
.
Eredis uses the same queueing mechanism as Erldis. eredis:q/2
uses
gen_server:call/2
to do a blocking call to the client
gen_server. The client will immediately send the request to Redis, add
the caller to the queue and reply with noreply
. This frees the
gen_server up to accept new requests and parse responses as they come
on the socket.
When data is received on the socket, we call eredis_parser:parse/2
until it returns a value, we then use gen_server:reply/2
to reply to
the first process waiting in the queue.
This queueing mechanism works because Redis guarantees that the response will be in the same order as the requests.
The response parser is the biggest difference between Eredis and other
libraries like Erldis, redis-erl and redis_pool. The common approach
is to either directly block or use active once to get the first part
of the response, then repeatedly use gen_tcp:recv/2
to get more data
when needed. Profiling identified this as a bottleneck, in particular
for MGET
and HMGET
.
To be as fast as possible, Eredis takes a different approach. The socket is always set to active once, which will let us receive data fast without blocking the gen_server. The tradeoff is that we must parse partial responses, which makes the parser more complex.
In order to make multibulk responses more efficient, the parser will parse all data available and continue where it left off when more data is available.
When the parser is accumulating data, a new binary is generated for
every call to parse/2
. This might create binaries that will be
reference counted. This could be improved by replacing it with an
iolist.
When parsing bulk replies, the parser knows the size of the bulk. If the
bulk is big and would come in many chunks, this could improved by
having the client explicitly use gen_tcp:recv/2
to fetch the entire
bulk at once.
Although this project is almost a complete rewrite, many patterns are the same as you find in Erldis, most notably the queueing of requests.
create_multibulk/1
and to_binary/1
were taken verbatim from Erldis.