This project explains how to export the Megadetector V5 models to ONNX format, and provides some tools to easily run inference using the ONNX model.
The motivation for this was to make it simpler to run: exporting to ONNX and running from that environment requires far fewer dependencies and with much simpler version constraints when compared to the full torch/megadetector/yolov5 environment.
The exporting can be complicated, but you can export the ONNX model on any platform where all the requirements are readily satisfied, and then run inference on another with just the minimal dependencies.
There are also instructions on converting the ONNX model to TensorRT to run on Nvidia GPUs and a tool for running inference using TensorRT.
The images used as input for inference can come from a number of sources, including:
- image files on disk
- video files on disk
- hierarchies of image and/or video files on disk
- from RaspberryPi camera
- from Jetson Nano CSI camera
Details on how to specify these sources are found in the 'Running Inference' document linked below.
Detailed documents for each step can be found at the following links:
Below is a full run through of the environment setup and running inference on a RaspberryPi 4b with 8GBytes of RAM. It installs the minimal packages needed to run inference.
It uses an ONNX model already exported (using the instructions in the link above) and available as below. This model
was exported statically, and expects image inputs of resolution 640x512 and a batch size of a single image; the
run-onnx.py tool can determine this from the model (from the actual model, not its name) and resizes them accordingly.
$ ls -l models
total 547220
-rw-r--r-- 1 pi pi 560346651 Nov 15 08:26 md_v5a.0.0_640x512_1.onnx
Clone this repository:
$ git clone https://github.com/parlaynu/megadetector-v5-onnx.git
Cloning into 'megadetector-v5-onnx'...
remote: Enumerating objects: 148, done.
remote: Counting objects: 100% (148/148), done.
remote: Compressing objects: 100% (106/106), done.
remote: Total 148 (delta 92), reused 97 (delta 41), pack-reused 0
Receiving objects: 100% (148/148), 2.37 MiB | 285.00 KiB/s, done.
Resolving deltas: 100% (92/92), done.
Create virtual environment:
$ python3.9 -m venv pyenv
$ source pyenv/bin/activate
Install dependencies:
$ cd megadetector-v5-onnx/
$ pip install -r requirements.txt
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting numpy==1.23.4
Downloading numpy-1.23.4-cp39-cp39-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (14.0 MB)
|████████████████████████████████| 14.0 MB 5.5 MB/s
Collecting opencv-python-headless==4.6.0.66
Downloading opencv_python_headless-4.6.0.66-cp36-abi3-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (27.2 MB)
|████████████████████████████████| 27.2 MB 81 kB/s
Collecting onnxruntime==1.13.1
Downloading onnxruntime-1.13.1-cp39-cp39-manylinux_2_27_aarch64.whl (4.3 MB)
|████████████████████████████████| 4.3 MB 6.3 MB/s
Collecting packaging
Downloading https://www.piwheels.org/simple/packaging/packaging-21.3-py3-none-any.whl (40 kB)
|████████████████████████████████| 40 kB 137 kB/s
Collecting protobuf
Downloading protobuf-4.21.9-cp37-abi3-manylinux2014_aarch64.whl (403 kB)
|████████████████████████████████| 403 kB 6.0 MB/s
Collecting flatbuffers
Downloading https://www.piwheels.org/simple/flatbuffers/flatbuffers-20181003210633-py2.py3-none-any.whl (14 kB)
Collecting sympy
Downloading https://www.piwheels.org/simple/sympy/sympy-1.11.1-py3-none-any.whl (6.5 MB)
|████████████████████████████████| 6.5 MB 738 kB/s
Collecting coloredlogs
Downloading https://www.piwheels.org/simple/coloredlogs/coloredlogs-15.0.1-py2.py3-none-any.whl (46 kB)
|████████████████████████████████| 46 kB 1.1 MB/s
Collecting humanfriendly>=9.1
Downloading https://www.piwheels.org/simple/humanfriendly/humanfriendly-10.0-py2.py3-none-any.whl (89 kB)
|████████████████████████████████| 89 kB 2.2 MB/s
Collecting pyparsing!=3.0.5,>=2.0.2
Downloading https://www.piwheels.org/simple/pyparsing/pyparsing-3.0.9-py3-none-any.whl (98 kB)
|████████████████████████████████| 98 kB 330 kB/s
Collecting mpmath>=0.19
Downloading https://www.piwheels.org/simple/mpmath/mpmath-1.2.1-py3-none-any.whl (532 kB)
|████████████████████████████████| 532 kB 382 kB/s
Installing collected packages: pyparsing, mpmath, humanfriendly, sympy, protobuf, packaging, numpy, flatbuffers, coloredlogs, opencv-python-headless, onnxruntime
Run the inference:
$ ./tools/run-onnx.py -p -x \
../models/md_v5a.0.0_640x512_1.onnx \
./images/original \
../outputs
preparing session
- available providers: ['CPUExecutionProvider']
- in use providers: ['CPUExecutionProvider']
building pipeline
- input shape: [1, 3, 512, 640]
- output shape: [1, 20400, 8]
running
000000 loading ./images/original/DSC04446.jpg
- resizing from 2048x1365 to 640x426
- padding from 640x426 to 640x512
- 00: found 2 objects
summary
- total runtime: 6.91
- average: 6.91
The resulting outputs are below. The first image is the full input with bounding boxes around the animals; the second row has the individual animals cut into separate images.
 |
|
 |
 |