[enterprise-4.7] Remove numbered OSP playbook prefixes

modules/installation-osp-creating-bootstrap-machine.adoc

@@ -16,22 +16,22 @@ Create a bootstrap machine and give it the network access it needs to run on {rh
 
 . On a command line, change the working directory to the location of the `inventory.yaml` and `common.yaml` files.
 
-. Insert the following content into a local file that is called `03_bootstrap.yaml`:
+. Insert the following content into a local file that is called `bootstrap.yaml`:
 +
-.`03_bootstrap.yaml`
+.`bootstrap.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/bootstrap.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/bootstrap.yaml[]
 ----
 ====
 
 . On a command line, run the playbook:
 +
 [source,terminal]
 ----
-$ ansible-playbook -i inventory.yaml 03_bootstrap.yaml
+$ ansible-playbook -i inventory.yaml bootstrap.yaml
 ----
 
 . After the bootstrap server is active, view the logs to verify that the Ignition files were received:

modules/installation-osp-creating-compute-machines.adoc

@@ -18,22 +18,22 @@ After standing up the control plane, create compute machines.
 
 . On a command line, change the working directory to the location of the `inventory.yaml` and `common.yaml` files.
 
-. Insert the following content into a local file that is called `05_compute-nodes.yaml`:
+. Insert the following content into a local file that is called `compute-nodes.yaml`:
 +
-.`05_compute-nodes.yaml`
+.`compute-nodes.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/compute-nodes.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/compute-nodes.yaml[]
 ----
 ====
 
 . On a command line, run the playbook:
 +
 [source,terminal]
 ----
-$ ansible-playbook -i inventory.yaml 05_compute-nodes.yaml
+$ ansible-playbook -i inventory.yaml compute-nodes.yaml
 ----
 
 .Next steps

modules/installation-osp-creating-control-plane.adoc

@@ -19,22 +19,22 @@ Create three control plane machines by using the Ignition config files that you
 
 . If the control plane Ignition config files aren't already in your working directory, copy them into it.
 
-. Insert the following content into a local file that is called `04_control-plane.yaml`:
+. Insert the following content into a local file that is called `control-plane.yaml`:
 +
-.`04_control-plane.yaml`
+.`control-plane.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/control-plane.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/control-plane.yaml[]
 ----
 ====
 
 . On a command line, run the playbook:
 +
 [source,terminal]
 ----
-$ ansible-playbook -i inventory.yaml 04_control-plane.yaml
+$ ansible-playbook -i inventory.yaml control-plane.yaml
 ----
 
 . Run the following command to monitor the bootstrapping process:

modules/installation-osp-creating-network-resources.adoc

@@ -16,7 +16,7 @@ Create the network resources that an {product-title} on {rh-openstack-first} ins
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/common.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/common.yaml[]
 ----
 ====
 
@@ -27,7 +27,7 @@ include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/o
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/inventory.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/inventory.yaml[]
 ----
 ====
 +
@@ -40,40 +40,40 @@ If you do not define a value for `os_bootstrap_fip`, the installer cannot downlo
 See "Enabling access to the environment" for more information.
 ====
 
-. Insert the following content into a local file that is called `01_security-groups.yaml`:
+. Insert the following content into a local file that is called `security-groups.yaml`:
 +
-.`01_security-groups.yaml`
+.`security-groups.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/security-groups.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/security-groups.yaml[]
 ----
 ====
 
-. Insert the following content into a local file that is called `02_network.yaml`:
+. Insert the following content into a local file that is called `network.yaml`:
 +
-.`02_network.yaml`
+.`network.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/network.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/network.yaml[]
 ----
 ====
 
-. On a command line, create security groups by running the first numbered playbook:
+. On a command line, create security groups by running the `security-groups.yaml` playbook:
 +
 [source,terminal]
 ----
-$ ansible-playbook -i inventory.yaml 01_security-groups.yaml
+$ ansible-playbook -i inventory.yaml security-groups.yaml
 ----
 
-. On a command line, create a network, subnet, and router by running the second numbered playbook:
+. On a command line, create a network, subnet, and router by running the `network.yaml` playbook:
 +
 [source,terminal]
 ----
-$ ansible-playbook -i inventory.yaml 02_network.yaml
+$ ansible-playbook -i inventory.yaml network.yaml
 ----
 
 . Optional: If you want to control the default resolvers that Nova servers use, run the {rh-openstack} CLI command:

modules/installation-osp-deleting-bootstrap-resources.adoc

@@ -16,22 +16,22 @@ Delete the bootstrap resources that you no longer need.
 
 .Procedure
 
-. Insert the following content into a local file that is called `down-03_bootstrap.yaml`:
+. Insert the following content into a local file that is called `down-bootstrap.yaml`:
 +
-.`down-03_bootstrap.yaml`
+.`down-bootstrap.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/down-bootstrap.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/down-bootstrap.yaml[]
 ----
 ====
 
 . On a command line, run the playbook:
 +
 [source,terminal]
 ----
-$ ansible-playbook -i inventory.yaml down-03_bootstrap.yaml
+$ ansible-playbook -i inventory.yaml down-bootstrap.yaml
 ----
 
 The bootstrap port, server, and floating IP address are deleted.

modules/installation-uninstall-infra.adoc

@@ -24,7 +24,7 @@ You may have the `common.yaml` and `inventory.yaml` playbooks left over from whe
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/common.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/common.yaml[]
 ----
 ====
 
@@ -35,73 +35,73 @@ include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/o
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/inventory.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/inventory.yaml[]
 ----
 ====
 
-. _Optional_: If your cluster uses Kuryr, insert the following content into a local file called `down-06_load-balancers.yaml`:
+. _Optional_: If your cluster uses Kuryr, insert the following content into a local file called `down-load-balancers.yaml`:
 +
-.`down-06_load-balancers.yaml`
+.`down-load-balancers.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/down-load-balancers.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/down-load-balancers.yaml[]
 ----
 ====
 
-. Insert the following content into a local file called `down-05_compute-nodes.yaml`:
+. Insert the following content into a local file called `down-compute-nodes.yaml`:
 +
-.`down-05_compute-nodes.yaml`
+.`down-compute-nodes.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/down-compute-nodes.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/down-compute-nodes.yaml[]
 ----
 ====
 
-. Insert the following content into a local file called `down-04_control-plane.yaml`:
+. Insert the following content into a local file called `down-control-plane.yaml`:
 +
-.`down-04_control-plane.yaml`
+.`down-control-plane.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/down-control-plane.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/down-control-plane.yaml[]
 ----
 ====
 
-. Insert the following content into a local file called `down-03_bootstrap.yaml`:
+. Insert the following content into a local file called `down-bootstrap.yaml`:
 +
-.`down-03_bootstrap.yaml`
+.`down-bootstrap.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/down-bootstrap.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/down-bootstrap.yaml[]
 ----
 ====
 
-. Insert the following content into a local file called `down-02_network.yaml`:
+. Insert the following content into a local file called `down-network.yaml`:
 +
-.`down-02_network.yaml`
+.`down-network.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/down-network.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/down-network.yaml[]
 ----
 ====
 
-. Insert the following content into a local file called `down-01_security-groups.yaml`:
+. Insert the following content into a local file called `down-security-groups.yaml`:
 +
-.`down-01_security-groups.yaml`
+.`down-security-groups.yaml`
 [%collapsible]
 ====
 [source,yaml]
 ----
-include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/openstack/down-security-groups.yaml[]
+include::https://raw.githubusercontent.com/openshift/installer/release-4.7/upi/openstack/down-security-groups.yaml[]
 ----
 ====
 
@@ -110,12 +110,12 @@ include::https://raw.githubusercontent.com/openshift/installer/release-4.6/upi/o
 [source,terminal]
 ----
 $ ansible-playbook -i inventory.yaml  \
-	down-03_bootstrap.yaml      \
-	down-04_control-plane.yaml  \
-	down-05_compute-nodes.yaml  \
-	down-06_load-balancers.yaml \
-	down-02_network.yaml        \
-	down-01_security-groups.yaml
+	down-bootstrap.yaml      \
+	down-control-plane.yaml  \
+	down-compute-nodes.yaml  \
+	down-load-balancers.yaml \
+	down-network.yaml        \
+	down-security-groups.yaml
 ----
 
 . Remove any DNS record changes you made for the {product-title} installation.