Skip to content

openresty/srcache-nginx-module

BranchesTags

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

349 Commits
src
src
 
 
t
t
 
 
util
util
 
 
.gitattributes
.gitattributes
 
 
.gitignore
.gitignore
 
 
.travis.yml
.travis.yml
 
 
Changes
Changes
 
 
README.markdown
README.markdown
 
 
config
config
 
 
valgrind.suppress
valgrind.suppress
 
 

Repository files navigation

Name

ngx_srcache - Transparent subrequest-based caching layout for arbitrary nginx locations

This module is not distributed with the Nginx source. See the installation instructions.

Table of Contents

Status

This module is production ready.

Version

This document describes srcache-nginx-module v0.32 released on 2 July 2020.

Synopsis

 upstream my_memcached {
     server 10.62.136.7:11211;
     keepalive 10;
 }

 location = /memc {
     internal;

     memc_connect_timeout 100ms;
     memc_send_timeout 100ms;
     memc_read_timeout 100ms;
     memc_ignore_client_abort on;

     set $memc_key $query_string;
     set $memc_exptime 300;

     memc_pass my_memcached;
 }

 location /foo {
     set $key $uri$args;
     srcache_fetch GET /memc $key;
     srcache_store PUT /memc $key;
     srcache_store_statuses 200 301 302 307 308;

     # proxy_pass/fastcgi_pass/drizzle_pass/echo/etc...
     # or even static files on the disk
 }
 location = /memc2 {
     internal;

     memc_connect_timeout 100ms;
     memc_send_timeout 100ms;
     memc_read_timeout 100ms;
     memc_ignore_client_abort on;

     set_unescape_uri $memc_key $arg_key;
     set $memc_exptime $arg_exptime;

     memc_pass unix:/tmp/memcached.sock;
 }

 location /bar {
     set_escape_uri $key $uri$args;
     srcache_fetch GET /memc2 key=$key;
     srcache_store PUT /memc2 key=$key&exptime=$srcache_expire;

     # proxy_pass/fastcgi_pass/drizzle_pass/echo/etc...
     # or even static files on the disk
 }
 map $request_method $skip_fetch {
     default     0;
     POST        1;
     PUT         1;
 }

 server {
     listen 8080;

     location /api/ {
         set $key "$uri?$args";

         srcache_fetch GET /memc $key;
         srcache_store PUT /memc $key;

         srcache_methods GET PUT POST;
         srcache_fetch_skip $skip_fetch;

         # proxy_pass/drizzle_pass/content_by_lua/echo/...
     }
 }

Back to TOC

Description

This module provides a transparent caching layer for arbitrary nginx locations (like those use an upstream or even serve static disk files). The caching behavior is mostly compatible with RFC 2616.

Usually, memc-nginx-module is used together with this module to provide a concrete caching storage backend. But technically, any modules that provide a REST interface can be used as the fetching and storage subrequests used by this module.

For main requests, the srcache_fetch directive works at the end of the access phase, so the standard access module's allow and deny direcives run before ours, which is usually the desired behavior for security reasons.

The workflow of this module looks like below:

srcache flowchart

Back to TOC

Subrequest caching

For subrequests, we explicitly disallow the use of this module because it's too difficult to get right. There used to be an implementation but it was buggy and I finally gave up fixing it and abandoned it.

However, if you're using lua-nginx-module, it's easy to do subrequest caching in Lua all by yourself. That is, first issue a subrequest to an memc-nginx-module location to do an explicit cache lookup, if cache hit, just use the cached data returned; otherwise, fall back to the true backend, and finally do a cache insertion to feed the data into the cache.

Using this module for main request caching and Lua for subrequest caching is the approach that we're taking in our business. This hybrid solution works great in production.

Back to TOC

Distributed Memcached Caching

Here is a simple example demonstrating a distributed memcached caching mechanism built atop this module. Suppose we do have three different memcached nodes and we use simple modulo to hash our keys.

 http {
     upstream moon {
         server 10.62.136.54:11211;
         server unix:/tmp/memcached.sock backup;
     }

     upstream earth {
         server 10.62.136.55:11211;
     }

     upstream sun {
         server 10.62.136.56:11211;
     }

     upstream_list universe moon earth sun;

     server {
         memc_connect_timeout 100ms;
         memc_send_timeout 100ms;
         memc_read_timeout 100ms;

         location = /memc {
             internal;

             set $memc_key $query_string;
             set_hashed_upstream $backend universe $memc_key;
             set $memc_exptime 3600; # in seconds
             memc_pass $backend;
         }

         location / {
             set $key $uri;
             srcache_fetch GET /memc $key;
             srcache_store PUT /memc $key;

             # proxy_pass/fastcgi_pass/content_by_lua/drizzle_pass/...
         }
     }
 }

Here's what is going on in the sample above:

  1. We first define three upstreams, moon, earth, and sun. These are our three memcached servers.
  2. And then we group them together as an upstream list entity named universe with the upstream_list directive provided by set-misc-nginx-module.
  3. After that, we define an internal location named /memc for talking to the memcached cluster.
  4. In this /memc location, we first set the $memc_key variable with the query string ($args), and then use the set_hashed_upstream directive to hash our $memc_key over the upsteam list universe, so as to obtain a concrete upstream name to be assigned to the variable $backend.
  5. We pass this $backend variable into the memc_pass directive. The $backend variable can hold a value among moon, earth, and sun.
  6. Also, we define the memcached caching expiration time to be 3600 seconds (i.e., an hour) by overriding the $memc_exptime variable.
  7. In our main public location /, we configure the $uri variable as our cache key, and then configure srcache_fetch for cache lookups and srcache_store for cache updates. We're using two subrequests to our /memc location defined earlier in these two directives.

One can use lua-nginx-module's set_by_lua or rewrite_by_lua directives to inject custom Lua code to compute the $backend and/or $key variables in the sample above.

One thing that should be taken care of is that memcached does have restriction on key lengths, i.e., 250 bytes, so for keys that may be very long, one could use the set_md5 directive or its friends to pre-hash the key to a fixed-length digest before assigning it to $memc_key in the /memc location or the like.

Further, one can utilize the srcache_fetch_skip and srcache_store_skip directives to control what to cache and what not on a per-request basis, and Lua can also be used here in a similar way. So the possibility is really unlimited.

To maximize speed, we often enable TCP (or Unix Domain Socket) connection pool for our memcached upstreams provided by HttpUpstreamKeepaliveModule, for example,

 upstream moon {
     server 10.62.136.54:11211;
     server unix:/tmp/memcached.sock backup;
     keepalive 10;
 }

where we define a connection pool which holds up to 10 keep-alive connections (per nginx worker process) for our moon upstream (cluster).

Back to TOC

Caching with Redis

Redis is an alternative key-value store with many additional features.

Here is a working example using the lua-resty-redis module:

  location ~ '\.php$|^/update.php' {
    # cache setup
    set $key $request_uri;
    try_files $uri =404;

    srcache_fetch_skip $skip_cache;
    srcache_store_skip $skip_cache;

    srcache_response_cache_control off;
    srcache_store_statuses 200 201 301 302 307 308 404 503;

    set_escape_uri $escaped_key $key;

    srcache_fetch GET /redis-fetch $key;
    srcache_store PUT /redis-store key=$escaped_key;

    more_set_headers 'X-Cache-Fetch-Status $srcache_fetch_status';
    more_set_headers 'X-Cache-Store-Status $srcache_store_status';

    fastcgi_split_path_info ^(.+?\.php)(|/.*)$;
    # Security note: If you're running a version of PHP older than the
    # latest 5.3, you should have "cgi.fix_pathinfo = 0;" in php.ini.
    # See http://serverfault.com/q/627903/94922 for details.
    include fastcgi_params;
    # Block httproxy attacks. See https://httpoxy.org/.
    fastcgi_param HTTP_PROXY "";
    fastcgi_param SCRIPT_FILENAME /var/www/html/$fastcgi_script_name;
    fastcgi_param PATH_INFO $fastcgi_path_info;
    fastcgi_param QUERY_STRING $query_string;
    fastcgi_intercept_errors on;

    fastcgi_pass upstream-name;
  }

  location /redis-fetch {
    internal;

    resolver 8.8.8.8 valid=300s;
    resolver_timeout 10s;

    content_by_lua_block {
      local key = assert(ngx.var.request_uri, "no key found")
      local redis = require "resty.redis"
      local red, err = redis:new()
      if not red then
        ngx.log(ngx.ERR, "Failed to create redis variable, error -> ", err)
        ngx.exit(500)
      end
      assert(red:connect("redis-master.default.svc.cluster.local", 6379))
      if not red then
        ngx.log(ngx.ERR, "Failed to connect to redis, error -> ", err)
        ngx.exit(500)
      end
      local res, err = red:auth("redispassword")
      if not res then
        ngx.say("failed to authenticate, ", err)
        ngx.exit(500)
      end
      local data = assert(red:get(key))
      assert(red:set_keepalive(10000, 100))
      if res == ngx.null then
        return ngx.exit(404)
      end
      ngx.print(data)
    }
  }

  location /redis-store {
    internal;

    resolver 8.8.8.8 valid=300s;
    resolver_timeout 10s;

    content_by_lua_block {
      local value = assert(ngx.req.get_body_data(), "no value found")
      local key = assert(ngx.var.request_uri, "no key found")
      local redis = require "resty.redis"
      local red, err = redis:new()
      if not red then
        ngx.log(ngx.ERR, "Failed to create redis variable, error -> ", err)
        ngx.exit(500)
      end
      assert(red:connect("redis-master.default.svc.cluster.local", 6379))
      if not red then
        ngx.log(ngx.ERR, "Failed to connect to redis, error -> ", err)
        ngx.exit(500)
      end
      local res, err = red:auth("redispassword")
      if not res then
        ngx.say("failed to authenticate, ", err)
        ngx.exit(500)
      end
      local data = assert(red:set(key, value))
      assert(red:set_keepalive(10000, 100))
      if res == ngx.null then
        return ngx.exit(404)
      end
    }
  }

Here is a working example by using the HTTPRedis (fetch) and Redis2 (store) modules:

 location /api {
     default_type text/css;

     set $key $uri;
     set_escape_uri $escaped_key $key;

     srcache_fetch GET /redis $key;
     srcache_store PUT /redis2 key=$escaped_key&exptime=120;

     # fastcgi_pass/proxy_pass/drizzle_pass/postgres_pass/echo/etc
 }

 location = /redis {
     internal;

     set_md5 $redis_key $args;
     redis_pass 127.0.0.1:6379;
 }

 location = /redis2 {
     internal;

     set_unescape_uri $exptime $arg_exptime;
     set_unescape_uri $key $arg_key;
     set_md5 $key;

     redis2_query set $key $echo_request_body;
     redis2_query expire $key $exptime;
     redis2_pass 127.0.0.1:6379;
 }

This example makes use of the $echo_request_body variable provided by echo-nginx-module. Note that you need the latest version of echo-nginx-module, v0.38rc2 because earlier versions may not work reliably.

Also, you need both HttpRedisModule and redis2-nginx-module. The former is used in the srcache_fetch subrequest and the latter is used in the srcache_store subrequest.

The Nginx core also has a bug that could prevent redis2-nginx-module's pipelining support from working properly in certain extreme conditions. And the following patch fixes this:

http://mailman.nginx.org/pipermail/nginx-devel/2012-March/002040.html

Note that, however, if you are using the OpenResty 1.0.15.3 bundle or later, then you already have everything that you need here in the bundle.

Back to TOC

Cache Key Preprocessing

It is often desired to preprocess the cache key to exclude random noises that may hurt the cache hit rate. For example, random session IDs in the URI arguments are usually desired to get removed.

Consider the following URI querystring

SID=BC3781C3-2E02-4A11-89CF-34E5CFE8B0EF&UID=44332&L=EN&M=1&H=1&UNC=0&SRC=LK&RT=62

we want to remove the SID and UID arguments from it. It is easy to achieve if you use lua-nginx-module at the same time:

 location = /t {
     rewrite_by_lua '
         local args = ngx.req.get_uri_args()
         args.SID = nil
         args.UID = nil
         ngx.req.set_uri_args(args)
     ';

     echo $args;
 }

Here we use the echo directive from echo-nginx-module to dump out the final value of $args in the end. You can replace it with your srcache-nginx-module configurations and upstream configurations instead for your case. Let's test this /t interface with curl:

$ curl 'localhost:8081/t?RT=62&SID=BC3781C3-2E02-4A11-89CF-34E5CFE8B0EF&UID=44332&L=EN&M=1&H=1&UNC=0&SRC=LK'
M=1&UNC=0&RT=62&H=1&L=EN&SRC=LK

It is worth mentioning that, if you want to retain the order of the URI arguments, then you can do string substitutions on the value of $args directly, for example,

location = /t {
    rewrite_by_lua '
        local args = ngx.var.args
        newargs, n, err = ngx.re.gsub(args, [[\b[SU]ID=[^&]*&?]], "", "jo")
        if n and n > 0 then
            ngx.var.args = newargs
        end
    ';

    echo $args;
}

Now test it with the original curl command again, we get exactly what we would expect:

RT=62&L=EN&M=1&H=1&UNC=0&SRC=LK

But for caching purposes, it's good to normalize the URI argument order so that you can increase the cache hit rate. And the hash table entry order used by LuaJIT or Lua can be used to normalize the order as a nice side effect.

Back to TOC

Directives

Back to TOC

srcache_fetch

syntax: srcache_fetch <method> <uri> <args>?

default: no

context: http, server, location, location if

phase: post-access

This directive registers an access phase handler that will issue an Nginx subrequest to lookup the cache.

When the subrequest returns status code other than 200, than a cache miss is signaled and the control flow will continue to the later phases including the content phase configured by ngx_http_proxy_module, ngx_http_fastcgi_module, and others. If the subrequest returns 200 OK, then a cache hit is signaled and this module will send the subrequest's response as the current main request's response to the client directly.

This directive will always run at the end of the access phase, such that ngx_http_access_module's allow and deny will always run before this.

You can use the srcache_fetch_skip directive to disable cache look-up selectively.

Back to TOC

srcache_fetch_skip

syntax: srcache_fetch_skip <flag>

default: srcache_fetch_skip 0

context: http, server, location, location if

phase: post-access

The <flag> argument supports nginx variables. When this argument's value is not empty and not equal to 0, then the fetching process will be unconditionally skipped.

For example, to skip caching requests which have a cookie named foo with the value bar, we can write

 location / {
     set $key ...;
     set_by_lua $skip '
         if ngx.var.cookie_foo == "bar" then
             return 1
         end
         return 0
     ';

     srcache_fetch_skip $skip;
     srcache_store_skip $skip;

     srcache_fetch GET /memc $key;
     srcache_store GET /memc $key;

     # proxy_pass/fastcgi_pass/content_by_lua/...
 }

where lua-nginx-module is used to calculate the value of the $skip variable at the (earlier) rewrite phase. Similarly, the $key variable can be computed by Lua using the set_by_lua or rewrite_by_lua directive too.

The standard map directive can also be used to compute the value of the $skip variable used in the sample above:

 map $cookie_foo $skip {
     default     0;
     bar         1;
 }

but your map statement should be put into the http config block in your nginx.conf file though.

Back to TOC

srcache_store

syntax: srcache_store <method> <uri> <args>?

default: no

context: http, server, location, location if

phase: output-filter

This directive registers an output filter handler that will issue an Nginx subrequest to save the response of the current main request into a cache backend. The status code of the subrequest will be ignored.

You can use the srcache_store_skip and srcache_store_max_size directives to disable caching for certain requests in case of a cache miss.

Since the v0.12rc7 release, both the response status line, response headers, and response bodies will be put into the cache. By default, the following special response headers will not be cached:

  • Connection
  • Keep-Alive
  • Proxy-Authenticate
  • Proxy-Authorization
  • TE
  • Trailers
  • Transfer-Encoding
  • Upgrade
  • Set-Cookie

You can use the srcache_store_pass_header and/or srcache_store_hide_header directives to control what headers to cache and what not.

The original response's data chunks get emitted as soon as they arrive. srcache_store just copies and collects the data in an output filter without postponing them from being sent downstream.

But please note that even though all the response data will be sent immediately, the current Nginx request lifetime will not finish until the srcache_store subrequest completes. That means a delay in closing the TCP connection on the server side (when HTTP keepalive is disabled, but proper HTTP clients should close the connection actively on the client side, which adds no extra delay or other issues at all) or serving the next request sent on the same TCP connection (when HTTP keepalive is in action).

Back to TOC

srcache_store_max_size

syntax: srcache_store_max_size <size>

default: srcache_store_max_size 0

context: http, server, location, location if

phase: output-header-filter

When the response body length is exceeding this size, this module will not try to store the response body into the cache using the subrequest template that is specified in srcache_store.

This is particular useful when using a cache storage backend that does have a hard upper limit on the input data. For example, the Memcached server has a default limit of 1 MB by item.

When 0 is specified (the default value), there's no limit check at all.

Back to TOC

srcache_store_skip

syntax: srcache_store_skip <flag>

default: srcache_store_skip 0

context: http, server, location, location if

phase: output-header-filter

The <flag> argument supports Nginx variables. When this argument's value is not empty and not equal to 0, then the storing process will be unconditionally skipped.

Starting from the v0.25 release, the <flag> expression (possibly containing Nginx variables) can be evaluated up to twice: the first time is right after the response header is being sent and when the <flag> expression is not evaluated to true values it will be evaluated again right after the end of the response body data stream is seen. Before v0.25, only the first time evaluation is performed.

Here's an example using Lua to set $nocache to avoid storing URIs that contain the string "/tmp":

 set_by_lua $nocache '
     if string.match(ngx.var.uri, "/tmp") then
         return 1
     end
     return 0';

 srcache_store_skip $nocache;

Back to TOC

srcache_store_statuses

syntax: srcache_store_statuses <status1> <status2> ..

default: srcache_store_statuses 200 301 302 307 308

context: http, server, location, location if

phase: output-header-filter

This directive controls what responses to store to the cache according to their status code.

By default, only 200, 301, 302, 307 and 308 responses will be stored to cache and any other responses will skip srcache_store.

You can specify arbitrary positive numbers for the response status code that you'd like to cache, even including error code like 404 and 503. For example:

 srcache_store_statuses 200 201 301 302 307 308 404 503;

At least one argument should be given to this directive.

This directive was first introduced in the v0.13rc2 release.

Back to TOC

srcache_store_ranges

syntax: srcache_store_ranges on|off

default: srcache_store_ranges off

context: http, server, location, location if

phase: output-body-filter

When this directive is turned on (default to off), srcache_store will also store 206 Partial Content responses generated by the standard ngx_http_range_filter_module. If you turn this directive on, you MUST add $http_range to your cache keys. For example,

 location / {
     set $key "$uri$args$http_range";
     srcache_fetch GET /memc $key;
     srcache_store PUT /memc $key;
 }

This directive was first introduced in the v0.27 release.

Back to TOC

srcache_header_buffer_size

syntax: srcache_header_buffer_size <size>

default: srcache_header_buffer_size 4k/8k

context: http, server, location, location if

phase: output-header-filter

This directive controles the header buffer when serializing response headers for srcache_store. The default size is the page size, usually 4k or 8k depending on specific platforms.

Note that the buffer is not used to hold all the response headers, but just each individual header. So the buffer is merely needed to be big enough to hold the longest response header.

This directive was first introduced in the v0.12rc7 release.

Back to TOC

srcache_store_hide_header

syntax: srcache_store_hide_header <header>

default: no

context: http, server, location, location if

phase: output-header-filter

By default, this module caches all the response headers except the following ones:

  • Connection
  • Keep-Alive
  • Proxy-Authenticate
  • Proxy-Authorization
  • TE
  • Trailers
  • Transfer-Encoding
  • Upgrade
  • Set-Cookie

You can hide even more response headers from srcache_store by listing their names (case-insensitive) by means of this directive. For examples,

 srcache_store_hide_header X-Foo;
 srcache_store_hide_header Last-Modified;

Multiple occurrences of this directive are allowed in a single location.

This directive was first introduced in the v0.12rc7 release.

See also srcache_store_pass_header.

Back to TOC

srcache_store_pass_header

syntax: srcache_store_pass_header <header>

default: no

context: http, server, location, location if

phase: output-header-filter

By default, this module caches all the response headers except the following ones:

  • Connection
  • Keep-Alive
  • Proxy-Authenticate
  • Proxy-Authorization
  • TE
  • Trailers
  • Transfer-Encoding
  • Upgrade
  • Set-Cookie

You can force srcache_store to store one or more of these response headers from srcache_store by listing their names (case-insensitive) by means of this directive. For examples,

 srcache_store_pass_header Set-Cookie;
 srcache_store_pass_header Proxy-Autenticate;

Multiple occurrences of this directive are allowed in a single location.

This directive was first introduced in the v0.12rc7 release.

See also srcache_store_hide_header.

Back to TOC

srcache_methods

syntax: srcache_methods <method>...

default: srcache_methods GET HEAD

context: http, server, location

phase: post-access, output-header-filter

This directive specifies HTTP request methods that are considered by either srcache_fetch or srcache_store. HTTP request methods not listed will be skipped completely from the cache.

The following HTTP methods are allowed: GET, HEAD, POST, PUT, and DELETE. The GET and HEAD methods are always implicitly included in the list regardless of their presence in this directive.

Note that since the v0.17 release HEAD requests are always skipped by srcache_store because their responses never carry a response body.

This directive was first introduced in the v0.12rc7 release.

Back to TOC

srcache_ignore_content_encoding

syntax: srcache_ignore_content_encoding on|off

default: srcache_ignore_content_encoding off

context: http, server, location, location if

phase: output-header-filter

When this directive is turned off (which is the default), non-empty Content-Encoding response header will cause srcache_store skip storing the whole response into the cache and issue a warning into nginx's error.log file like this:

[warn] 12500#0: *1 srcache_store skipped due to response header "Content-Encoding: gzip"
            (maybe you forgot to disable compression on the backend?)

Turning on this directive will ignore the Content-Encoding response header and store the response as usual (and also without warning).

It's recommended to always disable gzip/deflate compression on your backend server by specifying the following line in your nginx.conf file:

 proxy_set_header  Accept-Encoding  "";

This directive was first introduced in the v0.12rc7 release.

Back to TOC

srcache_request_cache_control

syntax: srcache_request_cache_control on|off

default: srcache_request_cache_control off

context: http, server, location

phase: post-access, output-header-filter

When this directive is turned on, the request headers Cache-Control and Pragma will be honored by this module in the following ways:

  1. srcache_fetch, i.e., the cache lookup operation, will be skipped when request headers Cache-Control: no-cache and/or Pragma: no-cache are present.
  2. srcache_store, i.e., the cache store operation, will be skipped when the request header Cache-Control: no-store is specified.

Turning off this directive will disable this functionality and is considered safer for busy sites mainly relying on cache for speed.

This directive was first introduced in the v0.12rc7 release.

See also srcache_response_cache_control.

Back to TOC

srcache_response_cache_control

syntax: srcache_response_cache_control on|off

default: srcache_response_cache_control on

context: http, server, location

phase: output-header-filter

When this directive is turned on, the response headers Cache-Control and Expires will be honored by this module in the following ways:

This directive takes priority over the srcache_store_no_store, srcache_store_no_cache, and srcache_store_private directives.

This directive was first introduced in the v0.12rc7 release.

See also srcache_request_cache_control.

Back to TOC

srcache_store_no_store

syntax: srcache_store_no_store on|off

default: srcache_store_no_store off

context: http, server, location

phase: output-header-filter

Turning this directive on will force responses with the header Cache-Control: no-store to be stored into the cache when srcache_response_cache_control is turned on and other conditions are met. Default to off.

This directive was first introduced in the v0.12rc7 release.

Back to TOC

srcache_store_no_cache

syntax: srcache_store_no_cache on|off

default: srcache_store_no_cache off

context: http, server, location

phase: output-header-filter

Turning this directive on will force responses with the header Cache-Control: no-cache to be stored into the cache when srcache_response_cache_control is turned on and other conditions are met. Default to off.

This directive was first introduced in the v0.12rc7 release.

Back to TOC

srcache_store_private

syntax: srcache_store_private on|off

default: srcache_store_private off

context: http, server, location

phase: output-header-filter

Turning this directive on will force responses with the header Cache-Control: private to be stored into the cache when srcache_response_cache_control is turned on and other conditions are met. Default to off.

This directive was first introduced in the v0.12rc7 release.

Back to TOC

srcache_default_expire

syntax: srcache_default_expire <time>

default: srcache_default_expire 60s

context: http, server, location, location if

phase: output-header-filter

This directive controls the default expiration time period that is allowed for the $srcache_expire variable value when neither Cache-Control: max-age=N nor Expires are specified in the response headers.

The <time> argument values are in seconds by default. But it's wise to always explicitly specify the time unit to avoid confusion. Time units supported are "s"(seconds), "ms"(milliseconds), "y"(years), "M"(months), "w"(weeks), "d"(days), "h"(hours), and "m"(minutes). For example,

 srcache_default_expire 30m; # 30 minutes

This time must be less than 597 hours.

The semantics of a zero expiration time depends on the actual cache backend storage you are currently using, which is agnostic to this module. In the case of memcached, for example, zero expiration times mean that the item will never expire.

This directive was first introduced in the v0.12rc7 release.

Back to TOC

srcache_max_expire

syntax: srcache_max_expire <time>

default: srcache_max_expire 0

context: http, server, location, location if

phase: output-header-filter

This directive controls the maximal expiration time period that is allowed for the $srcache_expire variable value. This setting takes priority over other calculating methods.

The <time> argument values are in seconds by default. But it's wise to always explicitly specify the time unit to avoid confusion. Time units supported are "s"(seconds), "ms"(milliseconds), "y"(years), "M"(months), "w"(weeks), "d"(days), "h"(hours), and "m"(minutes). For example,

 srcache_max_expire 2h;  # 2 hours

This time must be less than 597 hours.

When 0 is specified, which is the default setting, then there will be no limit at all.

This directive was first introduced in the v0.12rc7 release.

Back to TOC

Variables

Back to TOC

$srcache_expire

type: integer

cacheable: no

writable: no

This Nginx variable gives the recommended expiration time period (in seconds) for the current response being stored into the cache. The algorithm of computing the value is as follows:

  1. When the response header Cache-Control: max-age=N is specified, then N will be used as the expiration time,
  2. otherwise if the response header Expires is specified, then the expiration time will be obtained by subtracting the current time stamp from the time specified in the Expires header,
  3. when neither Cache-Control: max-age=N nor Expires headers are specified, use the value specified in the srcache_default_expire directive.

The final value of this variable will be the value specified by the srcache_max_expire directive if the value obtained in the algorithm above exceeds the maximal value (if any).

You don't have to use this variable for the expiration time.

This variable was first introduced in the v0.12rc7 release.

Back to TOC

$srcache_fetch_status

type: string

cacheable: no

writable: no

This Nginx variable is evaluated to the status of the "fetch" phase for the caching system. Three values are possible, HIT, MISS, and BYPASS.

When the "fetch" subrequest returns status code other than 200 or its response data is not well-formed, then this variable is evaluated to the value MISS.

The value of this variable is only meaningful after the access request processing phase, or BYPASS is always given.

This variable was first introduced in the v0.14 release.

Back to TOC

$srcache_store_status

type: string

cacheable: no

writable: no

This Nginx variable gives the current caching status for the "store" phase. Two possible values, STORE and BYPASS can be obtained.

Because the responses for the "store" subrequest are always discarded, so the value of this variable will always be STORE as long as the "store" subrequest is actually issued.

The value of this variable is only meaningful at least when the request headers of the current (main) request are being sent. The final result can only be obtained after all the response body has been sent if the Content-Length response header is not specified for the main request.

This variable was first introduced in the v0.14 release.

Back to TOC

Known Issues

Back to TOC

Caveats

  • It is recommended to disable your backend server's gzip compression and use nginx's ngx_http_gzip_module to do the job. In case of ngx_http_proxy_module, you can use the following configure setting to disable backend gzip compression:
 proxy_set_header  Accept-Encoding  "";
 map $request_method $skip_fetch {
     default     0;
     POST        1;
     PUT         1;
 }

 server {
     listen 8080;

     location /api/ {
         set $key "$uri?$args";

         srcache_fetch GET /memc $key;
         srcache_store PUT /memc $key;

         srcache_methods GET PUT POST;
         srcache_fetch_skip $skip_fetch;

         # proxy_pass/drizzle_pass/content_by_lua/echo/...
     }
 }

Back to TOC

Trouble Shooting

To debug issues, you should always check your Nginx error.log file first. If no error messages are printed, you need to enable the Nginx debugging logs to get more details, as explained in debugging log.

Several common pitfalls for beginners:

  • The original response carries a Cache-Control header that explicitly disables caching and you do not configure directives like srcache_response_cache_control.
  • The original response is already gzip compressed, which is not cached by default (see srcache_ignore_content_encoding).
  • Memcached might return CLIENT_ERROR bad command line format when using a too long key (250 chars as of version 1.4.25). It is thus safer to use set_md5 $key $uri$args; instead of set $key $uri$args;. The set_md5 directive (and more) is available from OpenResty's set-misc module.
  • Nginx might return client intended to send too large body when trying to store objects larger than 1m to the storage backend, in which case nginx client_max_body_size must be set to a higher value.
  • Memcached might fail to store objects larger than 1m, causing errors like srcache_store subrequest failed status=502. Since version 1.4.2, memcached supports a command-line -I option to override the default size of each slab page. Please read its manpage for more information.

Back to TOC

Installation

It is recommended to install this module as well as the Nginx core and many other goodies via the OpenResty bundle. It is the easiest way and most safe way to set things up. See OpenResty's installation instructions for details.

Alternatively, you can build Nginx with this module all by yourself:

 wget 'http://nginx.org/download/nginx-1.9.15.tar.gz'
 tar -xzvf nginx-1.9.15.tar.gz
 cd nginx-1.9.15/

 # Here we assume you would install you nginx under /opt/nginx/.
 ./configure --prefix=/opt/nginx \
      --add-module=/path/to/srcache-nginx-module

 make -j2
 make install

Starting from NGINX 1.9.11, you can also compile this module as a dynamic module, by using the --add-dynamic-module=PATH option instead of --add-module=PATH on the ./configure command line above. And then you can explicitly load the module in your nginx.conf via the load_module directive, for example,

load_module /path/to/modules/ngx_http_srcache_filter_module.so;

Back to TOC

Compatibility

The following versions of Nginx should work with this module:

  • 1.9.x (last tested: 1.9.15)
  • 1.8.x
  • 1.7.x (last tested: 1.7.10)
  • 1.5.x (last tested: 1.5.12)
  • 1.4.x (last tested: 1.4.4)
  • 1.3.x (last tested: 1.3.7)
  • 1.2.x (last tested: 1.2.9)
  • 1.1.x (last tested: 1.1.5)
  • 1.0.x (last tested: 1.0.11)
  • 0.9.x (last tested: 0.9.4)
  • 0.8.x >= 0.8.54 (last tested: 0.8.54)

Earlier versions of Nginx like 0.7.x, 0.6.x and 0.5.x will not work.

If you find that any particular version of Nginx above 0.7.44 does not work with this module, please consider reporting a bug.

Back to TOC

Community

Back to TOC

English Mailing List

The openresty-en mailing list is for English speakers.

Back to TOC

Chinese Mailing List

The openresty mailing list is for Chinese speakers.

Back to TOC

Bugs and Patches

Please submit bug reports, wishlists, or patches by

  1. creating a ticket on the GitHub Issue Tracker,
  2. or posting to the OpenResty community.

Back to TOC

Source Repository

Available on github at openresty/srcache-nginx-module.

Back to TOC

Test Suite

This module comes with a Perl-driven test suite. The test cases are declarative too. Thanks to the Test::Nginx module in the Perl world.

To run it on your side:

 $ PATH=/path/to/your/nginx-with-srcache-module:$PATH prove -r t

You need to terminate any Nginx processes before running the test suite if you have changed the Nginx server binary.

Because a single nginx server (by default, localhost:1984) is used across all the test scripts (.t files), it's meaningless to run the test suite in parallel by specifying -jN when invoking the prove utility.

Some parts of the test suite requires modules ngx_http_rewrite_module, echo-nginx-module, rds-json-nginx-module, and drizzle-nginx-module to be enabled as well when building Nginx.

Back to TOC

TODO

  • add gzip compression and decompression support.
  • add new nginx variable $srcache_key and new directives srcache_key_ignore_args, srcache_key_filter_args, and srcache_key_sort_args.

Back to TOC

Getting involved

You'll be very welcomed to submit patches to the author or just ask for a commit bit to the source repository on GitHub.

Back to TOC

Author

Yichun "agentzh" Zhang (章亦春) [email protected], CloudFlare Inc.

Back to TOC

Copyright & License

Copyright (c) 2010-2016, Yichun "agentzh" Zhang (章亦春) [email protected], CloudFlare Inc.

This module is licensed under the terms of the BSD license.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Back to TOC

See Also

Back to TOC

About

Transparent subrequest-based caching layout for arbitrary nginx locations.

wiki.nginx.org/NginxHttpSRCacheModule

Resources

Readme
Activity
Custom properties

Stars

477 stars

Watchers

48 watching

Forks

105 forks
Report repository

Releases

51 tags

Packages

No packages published

Contributors 13

Languages