Merge branch 'torvalds:master' into master

Documentation/devicetree/bindings/soc/rockchip/grf.yaml

@@ -31,10 +31,16 @@ properties:
               - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rk3588-usb-grf
               - rockchip,rk3588-usbdpphy-grf
-              - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vo0-grf
+              - rockchip,rk3588-vo1-grf
               - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
+      - items:
+          - const: rockchip,rk3588-vo-grf
+          - const: syscon
+        deprecated: true
+        description: Use rockchip,rk3588-vo{0,1}-grf instead.
       - items:
           - enum:
               - rockchip,px30-grf
@@ -262,6 +268,8 @@ allOf:
           contains:
             enum:
               - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vo0-grf
+              - rockchip,rk3588-vo1-grf
 
     then:
       required:

arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts

@@ -387,7 +387,7 @@
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi

@@ -154,6 +154,22 @@
 	};
 };
 
+&gpio3 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+	 * eMMC and SPI flash powered-down initially (in fact it keeps the
+	 * reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override
+	 * that signal so that eMMC and SPI can be used regardless of the state
+	 * of the signal.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PD5 GPIO_ACTIVE_LOW>;
+		gpio-hog;
+		line-name = "bios_disable_override";
+		output-high;
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
@@ -409,6 +425,7 @@
 
 &i2s0 {
 	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
 	status = "okay";
@@ -417,8 +434,8 @@
 /*
  * As Q7 does not specify neither a global nor a RX clock for I2S these
  * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
- * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
- * conflicts.
+ * Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off
+ * definitions to prevent conflicts.
  */
 &i2s0_2ch_bus {
 	rockchip,pins =
@@ -428,6 +445,14 @@
 		<3 RK_PD7 1 &pcfg_pull_none>;
 };
 
+&i2s0_2ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcc_1v8>;
@@ -449,9 +474,14 @@
 
 &pinctrl {
 	pinctrl-names = "default";
-	pinctrl-0 = <&q7_thermal_pin>;
+	pinctrl-0 = <&q7_thermal_pin &bios_disable_override_hog_pin>;
 
 	gpios {
+		bios_disable_override_hog_pin: bios-disable-override-hog-pin {
+			rockchip,pins =
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
 		q7_thermal_pin: q7-thermal-pin {
 			rockchip,pins =
 				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;

arch/arm64/boot/dts/rockchip/rk356x.dtsi

@@ -1592,10 +1592,9 @@
 			 <&cru SRST_TSADCPHY>;
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
-		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&tsadc_pin>;
-		pinctrl-1 = <&tsadc_shutorg>;
-		pinctrl-2 = <&tsadc_pin>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&tsadc_shutorg>;
+		pinctrl-1 = <&tsadc_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/rockchip/rk3588-base.dtsi

@@ -582,14 +582,14 @@
 	};
 
 	vo0_grf: syscon@fd5a6000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		compatible = "rockchip,rk3588-vo0-grf", "syscon";
 		reg = <0x0 0xfd5a6000 0x0 0x2000>;
 		clocks = <&cru PCLK_VO0GRF>;
 	};
 
 	vo1_grf: syscon@fd5a8000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
-		reg = <0x0 0xfd5a8000 0x0 0x100>;
+		compatible = "rockchip,rk3588-vo1-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x4000>;
 		clocks = <&cru PCLK_VO1GRF>;
 	};
 

arch/riscv/boot/dts/starfive/jh7110-common.dtsi

@@ -365,6 +365,12 @@
 	};
 };
 
+&syscrg {
+	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>,
+			  <&pllclk JH7110_PLLCLK_PLL0_OUT>;
+	assigned-clock-rates = <500000000>, <1500000000>;
+};
+
 &sysgpio {
 	i2c0_pins: i2c0-0 {
 		i2c-pins {

drivers/firmware/qcom/qcom_qseecom_uefisecapp.c

@@ -715,6 +715,10 @@ static int qcuefi_set_reference(struct qcuefi_client *qcuefi)
 static struct qcuefi_client *qcuefi_acquire(void)
 {
 	mutex_lock(&__qcuefi_lock);
+	if (!__qcuefi) {
+		mutex_unlock(&__qcuefi_lock);
+		return NULL;
+	}
 	return __qcuefi;
 }
 

drivers/md/dm-integrity.c

@@ -2174,6 +2174,7 @@ static void dm_integrity_map_continue(struct dm_integrity_io *dio, bool from_map
 	struct bio *bio = dm_bio_from_per_bio_data(dio, sizeof(struct dm_integrity_io));
 	unsigned int journal_section, journal_entry;
 	unsigned int journal_read_pos;
+	sector_t recalc_sector;
 	struct completion read_comp;
 	bool discard_retried = false;
 	bool need_sync_io = ic->internal_hash && dio->op == REQ_OP_READ;
@@ -2314,6 +2315,7 @@ static void dm_integrity_map_continue(struct dm_integrity_io *dio, bool from_map
 			goto lock_retry;
 		}
 	}
+	recalc_sector = le64_to_cpu(ic->sb->recalc_sector);
 	spin_unlock_irq(&ic->endio_wait.lock);
 
 	if (unlikely(journal_read_pos != NOT_FOUND)) {
@@ -2368,7 +2370,7 @@ static void dm_integrity_map_continue(struct dm_integrity_io *dio, bool from_map
 	if (need_sync_io) {
 		wait_for_completion_io(&read_comp);
 		if (ic->sb->flags & cpu_to_le32(SB_FLAG_RECALCULATING) &&
-		    dio->range.logical_sector + dio->range.n_sectors > le64_to_cpu(ic->sb->recalc_sector))
+		    dio->range.logical_sector + dio->range.n_sectors > recalc_sector)
 			goto skip_check;
 		if (ic->mode == 'B') {
 			if (!block_bitmap_op(ic, ic->recalc_bitmap, dio->range.logical_sector,

drivers/platform/cznic/Kconfig

@@ -70,7 +70,7 @@ config TURRIS_OMNIA_MCU_TRNG
 	bool "Turris Omnia MCU true random number generator"
 	default y
 	depends on TURRIS_OMNIA_MCU_GPIO
-	depends on HW_RANDOM
+	depends on HW_RANDOM=y || HW_RANDOM=TURRIS_OMNIA_MCU
 	help
 	  Say Y here to add support for the true random number generator
 	  provided by CZ.NIC's Turris Omnia MCU.

drivers/staging/media/atomisp/pci/sh_css_frac.h

@@ -32,12 +32,24 @@
 #define uISP_VAL_MAX		      ((unsigned int)((1 << uISP_REG_BIT) - 1))
 
 /* a:fraction bits for 16bit precision, b:fraction bits for ISP precision */
-#define sDIGIT_FITTING(v, a, b) \
-	min_t(int, max_t(int, (((v) >> sSHIFT) >> max(sFRACTION_BITS_FITTING(a) - (b), 0)), \
-	  sISP_VAL_MIN), sISP_VAL_MAX)
-#define uDIGIT_FITTING(v, a, b) \
-	min((unsigned int)max((unsigned)(((v) >> uSHIFT) \
-	>> max((int)(uFRACTION_BITS_FITTING(a) - (b)), 0)), \
-	  uISP_VAL_MIN), uISP_VAL_MAX)
+static inline int sDIGIT_FITTING(int v, int a, int b)
+{
+	int fit_shift = sFRACTION_BITS_FITTING(a) - b;
+
+	v >>= sSHIFT;
+	v >>= fit_shift > 0 ? fit_shift : 0;
+
+	return clamp_t(int, v, sISP_VAL_MIN, sISP_VAL_MAX);
+}
+
+static inline unsigned int uDIGIT_FITTING(unsigned int v, int a, int b)
+{
+	int fit_shift = uFRACTION_BITS_FITTING(a) - b;
+
+	v >>= uSHIFT;
+	v >>= fit_shift > 0 ? fit_shift : 0;
+
+	return clamp_t(unsigned int, v, uISP_VAL_MIN, uISP_VAL_MAX);
+}
 
 #endif /* __SH_CSS_FRAC_H */

kernel/printk/printk.c

@@ -2620,6 +2620,7 @@ int match_devname_and_update_preferred_console(const char *devname,
 
 	return -ENOENT;
 }
+EXPORT_SYMBOL_GPL(match_devname_and_update_preferred_console);
 
 bool console_suspend_enabled = true;
 EXPORT_SYMBOL(console_suspend_enabled);