Case for Maix Bit board, camera, display and buttons
Materials
- Printed parts
- Maix Bit with display and camera
- 4 Screws for plastics (~2.5 mm)
Instructions
- Print all parts
- Test fittings e drill/adjust holes for screws
- Insert plastic extensors for rear buttons
-
Solder buttons wires directly to pins:
22: ENTER
21: PAGE
-
Insert Maix Bit board with camera assembled and display connected
-
Use the printed bar with screws to fix the baord
- Place the display in place
- Place the case front, taking care don't "byte" wires
- Use other two screws to close the case
