oVirt Engine Extension AAA LDAP

Welcome to the oVirt Engine AAA LDAP Extension source repository. This repository is hosted on GitHub:ovirt-engine-extension-aaa-ldap

This repository contains extension to use LDAP servers to authenticate users to oVirt Engine.

##QUICK START

USING INSTALLER

Install ovirt-engine-extension-aaa-ldap-setup and execute:

 # ovirt-engine-extension-aaa-ldap-setup

The setup will guide you throughout the process of most common use cases.

USING CONFIGURATION FILES

Examples are available at the following directory:

/usr/share/ovirt-engine-extension-aaa-ldap*/examples

Content is relative to /etc/ovirt-engine directory.

Per your setup, copy recursive examples/ad/. (Active Directory) or examples/simple/. to /etc/ovirt-engine, optionally modify the profile1 within the file names and profile1 within the content to a value that suites your environment.
Customize the vars.* variables within files to meet your setup.
Test drive your configuration

oVirt 3.6/4.x

Test drive can be done as standalone process.

a. Test login:

Execute:
```
# ovirt-engine-extensions-tool aaa login-user \
     --profile=@PROFILE@ --user-name=@USER@
```
Replace:
- @PROFILE@ with authn ovirt.engine.aaa.authn.profile.name.
- @USER@ with user you want to test.
Inspect output for initialization errors.

Inspect PrincipalRecord and GroupRecord within the output and verify it matches expectations.

b. Test search:

Search by executing:
```
# ovirt-engine-extensions-tool aaa search --extension-name=@AUTHZ@ \
     --entity=@ENTITY@ --entity-name=@NAME@
```
Optionally add the following to enable group resolution: --authz-flag=resolve-groups --authz-flag=resolve-groups-recursive

Replace:
- @AUTHZ@ with authz extension name.
- @ENTITY@ with either 'principal' or 'group'.
- @NAME@ with requested name to search.
Inspect output for initialization errors.

Inspect PrincipalRecord and GroupRecord within the output and verify it matches expectations.

c. Restart ovirt-engine, verify no startup errors.

oVirt 3.5

a. Restart ovirt-engine, verify no startup errors.

b. Within ovirt-engine try to search for users, add a user and assign SuperUser system roles.

c. Try to login using the newly added user.
Complete customization of profile, such as enabling startTLS.

IMPLEMENTATION NOTES

Implementation uses UnboundID LDAP SDK for Java. Many of the terms and configuration options derived from the SDK terms. More information can be found at UnboundID site[1].

Refer to README.unboundid-ldapsdk for known issues and limitations.

[1] https://www.ldap.com/unboundid-ldap-sdk-for-java

EXTENSION CONFIGURATION

AUTHZ

Configure authorization extension.

/etc/ovirt-engine/extensions.d/@[email protected]

ovirt.engine.extension.name = @AUTHZ_NAME@
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine.extension.aaa.ldap
ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engine.extension.aaa.ldap.AuthzExtension
ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authz
config.profile.file.1 = @PROFILE_CONFIGURATION@

@AUTHZ_NAME@
    Extension instance name.
@PROFILE@
    Profile name, visible to user.
@PROFILE_CONFIGURATION@
    Profile configuration file, may be relative to extension configuration.

AUTHN

Configure authentication extension.

/etc/ovirt-engine/extensions.d/@[email protected]

ovirt.engine.extension.name = @AUTHN_NAME@
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine.extension.aaa.ldap
ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engine.extension.aaa.ldap.AuthnExtension
ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn
ovirt.engine.aaa.authn.profile.name = @PROFILE@
ovirt.engine.aaa.authn.authz.plugin = @AUTHZ_NAME@
config.profile.file.1 = @PROFILE_CONFIGURATION@

@AUTHN_NAME@
    Extension instance name.
@AUTHZ_NAME@
    Authz extension instance name.
@PROFILE@
    Profile name, visible to user.
@PROFILE_CONFIGURATION@
    Profile configuration file, may be relative to extension configuration.

REMOVING CONFIGURED PROFILE

Following steps describe how to remove a configured LDAP profile (profile name 'profile1' is assumed in commands, please adapt to profile name that should be removed):

Remove profile configuration files

rm /etc/ovirt-engine/extensions.d/profile1-authn.properties
rm /etc/ovirt-engine/extensions.d/profile1-authz.properties
rm /etc/ovirt-engine/aaa/profile1.properties

Restart ovirt-engine
```
systemctl restart ovirt-engine
```

Note: The above steps will remove profile configuration, so users from this profile will no longer be able to login into engine. But those users still have permissions defined in engine, so if you want to remove those permissions you need to do following:

1. Login into webadmin and switch to Users tab
2. Remove all users from the provider you have removed above (they should
   have their Authorization provider set to 'profile1-authz'

PROFILE CONFIGURATION EXAMPLES

OPENLDAP/389DS/IPA/...

Using simple bind transport using startTLS:

    # select one
    include = <openldap.properties>
    #include = <389ds.properties>
    #include = <rhds.properties>
    #include = <ipa.properties>
    #include = <iplanet.properties>
    #include = <rfc2307-generic.properties>
    #include = <rfc2307-389ds.properties>
    #include = <rfc2307-rhds.properties>
    #include = <rfc2307-openldap.properties>
    #include = <rfc2307-edir.properties>

    vars.server = ldap1.company.com
    vars.user = uid=search,cn=users,cn=accounts,dc=company,dc=com
    vars.password = 123456

    pool.default.serverset.single.server = ${global:vars.server}
    pool.default.auth.simple.bindDN = ${global:vars.user}
    pool.default.auth.simple.password = ${global:vars.password}
    pool.default.ssl.startTLS = true
    pool.default.ssl.truststore.file = ${local:_basedir}/${global:vars.server}.jks
    pool.default.ssl.truststore.password = changeit

Round robin configuration:

    pool.default.serverset.type = round-robin
    pool.default.serverset.round-robin.1.server = ${global:vars.server1}
    pool.default.serverset.round-robin.2.server = ${global:vars.server2}

In case sasl mechanism is used, such as gssapi, set the following within extension configuration:

   # Except of active directory
   config.globals.bindFormat.simple_bindFormat = realm

More supported configuration at README.profile.

ACTIVE DIRECTORY

Active Directory 2003 R2 and above is supported.

Using simple bind transport using startTLS. Unfortunately, SASL does not provide bind failure reasons.

User name is the userPrincipalName field of the user, the suffix is usually the domain name.

Connect to Domain Controller DNS Server directly, use SRV record to resolve hosts.

    include = <ad.properties>

    vars.forest = company.com
    vars.user = search@${global:vars.forest}
    vars.password = 123456
    vars.dns = dns://dc1.${global:vars.forest} dns://dc2.${global:vars.forest}

    pool.default.serverset.type = srvrecord
    pool.default.serverset.srvrecord.domain = ${global:vars.forest}
    pool.default.auth.simple.bindDN = ${global:vars.user}
    pool.default.auth.simple.password = ${global:vars.password}
    pool.default.serverset.srvrecord.jndi-properties.java.naming.provider.url = ${global:vars.dns}
    pool.default.socketfactory.resolver.uRL = ${global:vars.dns}
    pool.default.ssl.startTLS = true
    pool.default.ssl.truststore.file = ${local:_basedir}/${global:vars.forest}.jks
    pool.default.ssl.truststore.password = changeit

More supported configuration at README.profile.

Single Sign-On for Virtual Machines

If you are going to use Single Sign-On for Virtual Machines, your authz name has to match your real domain name.

If you are going to use ovirt-engine-extension-aaa-ldap-setup, you will be asked to support Single Sign-On for Virtual Machines or not. So generated configuration files will be created upon answer to that question.

If you are going to create your configuration files manually, please beware that by default authz name is specified with '-authz' suffix in all examples, so please make sure to correct it in your final configuration file.

Once rhbz#1133137 is resolved, this behaviour would not be longer needed.

X.509 CERTIFICATE TRUST STORE

When using TLS/SSL to communicate with LDAP server an X.509 certificate trust store should be provided if the certificate of the LDAP server is not signed by well known certification authority.

The trust store can be anything Java supports, by default it is JKS (Java Key Store) format.

Use the following command to create a JKS myrootca.jks trust store using password 'changeit' and import the certificate myrootca.pem into alias myrootca:

 $ keytool -importcert -noprompt -trustcacerts -alias myrootca \
       -file myrootca.pem -keystore myrootca.jks -storepass changeit

The root certificate should be obtained from the LDAP server, exact method is vendor specific.

OpenLDAP

Open /etc/openldap/slapd.conf
Seek TLSCACertificateFile or TLSCACertificatePath.
Locate certificate file.

FreeIPA

/etc/ipa/ca.crt

Active Directory

Windows: > certutil -ca.cert myrootca.der
Linux: $ openssl -in myrootca.der -inform DER -out myrootca.pem

Most LDAP servers will provide root certificate within TLS/SSL negotiation.

Use the following sequence to extract:
```
$ openssl s_client -connect @HOST@:636 -showcerts < /dev/null
```
Copy/paste the last certificate into myrootca.pem Copy/paste the first certificate into end.pem

Check if it is a root certificate:

$ openssl verify -CAfile myrootca.pem end.pem

APACHE SSO CONFIGURATION

Authorization extension can be used in an environment in which apache preforms the authentication, common example is kerberos. Use the ovirt-engine-extension-aaa-misc and configure the http authentication extension to acquire principal name out of the request.

APACHE CONFIGURATION

The following example enforces kerberos authentication, and delegate principal name via HTTP headers. The actual kerberos configuration is out of scope for this document.

oVirt 3.x

# mod_auth_kerb module has to be enabled and loaded
<LocationMatch ^(/ovirt-engine/(webadmin|userportal|api)|/api)>
    RewriteEngine on
    RewriteCond %{LA-U:REMOTE_USER} ^(.*)$
    RewriteRule ^(.*)$ - [L,NS,P,E=REMOTE_USER:%1]
    RequestHeader set X-Remote-User %{REMOTE_USER}s

    AuthType Kerberos
    AuthName "Kerberos Login"

    # Modify to match installation
    Krb5Keytab /etc/krb5.keytab

    # Modify to match installation
    KrbAuthRealms REALM.COM

    KrbMethodK5Password off
    Require valid-user
</LocationMatch>

oVirt 4.x

# mod_auth_gssapi and mod_session modules have to be enabled and loaded
<LocationMatch ^/ovirt-engine/sso/(interactive-login-negotiate|oauth/token-http-auth)|^/ovirt-engine/api>
  <If "req('Authorization') !~ /^(Bearer|Basic)/i">
    RewriteEngine on
    RewriteCond %{LA-U:REMOTE_USER} ^(.*)$
    RewriteRule ^(.*)$ - [L,NS,P,E=REMOTE_USER:%1]
    RequestHeader set X-Remote-User %{REMOTE_USER}s

    AuthType GSSAPI
    AuthName "Kerberos Login"

    GssapiCredStore keytab:/etc/httpd/http.keytab
    GssapiUseSessions On
    Session On
    SessionCookieName ovirt_gssapi_session path=/private;httponly;secure;

    Require valid-user
    ErrorDocument 401 "<html><meta http-equiv=\"refresh\" content=\"0; url=/ovirt-engine/sso/login-unauthorized\"/><body><a href=\"/ovirt-engine/sso/login-unauthorized\">Here</a></body></html>"
  </If>
</LocationMatch>

WARNING!!!

In case SSO is enforced on partial URI list (example only api), The X-Remote-User must be reseted for the remaining URIs, to avoid security bypass.

AUTHN EXTENSION

The following configuration read the X-Remote-User header and sets it as principal name.

/etc/ovirt-engine/extensions.d/http-authn.properties

ovirt.engine.extension.name = http-authn
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine.extension.aaa.misc
ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engine.extension.aaa.misc.http.AuthnExtension
ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn
ovirt.engine.aaa.authn.profile.name = http
ovirt.engine.aaa.authn.authz.plugin = ldap-authz
ovirt.engine.aaa.authn.mapping.plugin = http-mapping
config.artifact.name = HEADER
config.artifact.arg = X-Remote-User

MAPPING

/etc/ovirt-engine/extensions.d/http-mapping.properties

ovirt.engine.extension.enabled = true
ovirt.engine.extension.name = http-mapping
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine.extension.aaa.misc
ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engine.extension.aaa.misc.mapping.MappingExtension
ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Mapping
config.mapAuthRecord.type = regex
config.mapAuthRecord.regex.mustMatch = true
config.mapAuthRecord.regex.pattern = ^(?<user>.*?)((\\\\(?<at>@)(?<suffix>.*?)@.*)|(?<realm>@.*))$

# START-PLATFORM-DEPENDED
# Active directory:
config.mapAuthRecord.regex.replacement = ${user}${at}${suffix}${realm}
# Other
config.mapAuthRecord.regex.replacement = ${user}${at}${suffix}
# END-PLATFORM-DEPENDED

PROBLEM DETERMINATION

USEFUL LDAP COMMANDS

Notations:

@HOST@ - LDAP HOST
@USERDN@ - Bind user DN, empty for anonymous.
@USERPW@ - Bind user password.
@BASEDN@ - Base DN

Find base DN

$ ldapsearch -H ldap://@HOST@ -x -D '@USERDN@' -w '@USERPW@' -b '' -s BASE defaultNamingContext namingContexts

Fetch entire rootDSE

$ ldapsearch -H ldap://@HOST@ -x -D '@USERDN@' -w '@USERPW@' -b '' -s BASE '*' +

Dump entire directory

$ ldapsearch -E pr=1024/noprompt -o ldif-wrap=no -H ldap://@HOST@ -x -D '@USERDN@' -w '@USERPW@' -b '@BASEDN@' '*' +

Test startTLS (preferred)

$ LDAPTLS_REQCERT=never ldapsearch -ZZ -H ldap://@HOST@ -x -D '@USERDN@' -w '@USERPW@' -b '@BASEDN@'

Test LDAP over SSL/TLS

LDAPTLS_REQCERT=never ldapsearch -H ldaps://@HOST@ -x -D '@USERDN@' -w '@USERPW@' -b '@BASEDN@'

Test LDAP over SSL/TLS using GSSAPI

$ LDAPTLS_REQCERT=never ldapsearch -H ldaps://@HOST@ -Y GSSAPI -b '@BASEDN@'

To test using a specific CA certificate, replace LDAPTLS_REQCERT=never with LDAPTLS_CACERT=ca.cer.

USEFUL DNS COMMANDS

Resolve forest LDAP SRV record

$ dig _ldap._tcp.@FOREST@ SRV

Resolve global catalog SRV record from specific dns server

$ dig @dc1.@FOREST@ _ldap._tcp.gc._msdcs.@FOREST@ SRV

ENGINE LOG

A logger by the name of org.ovirt.engine.extension.aaa.ldap can be set to INFO, DEBUG, FINE, FINER or ALL to receive verbose output.

To modify logger level to ALL while ovirt-engine is running use the following command, replace admin@internal with any user with SuperUser role:

    $ "${JBOSS_HOME}/bin/jboss-cli.sh" \
        --connect \
        --timeout=30000 \
        --controller=localhost:8706 \
        --user=admin@internal \
        --commands="
            if (outcome != success) of /subsystem=logging/logger=org.ovirt.engine.extension.aaa.ldap:read-attribute(name=level),
              /subsystem=logging/logger=org.ovirt.engine.extension.aaa.ldap:add,
            end-if,
            /subsystem=logging/logger=org.ovirt.engine.extension.aaa.ldap:write-attribute(name=level,value=ALL)
        "

ADVANCED EXTENSION CONFIGURATION

config.profile.searchdir.@SORT@ = DIRECTORY

Additional profile configuration search directories. xxx is alphabetic sorted.

config.profile.file.@SORT@ = FILE

Profile configurations to read. xxx is alphabetic sorted.

config.globals.@SORT@.@VAR@ = VALUE

Sequence variables to set before initialization.

config.authn.credentials-change.message = TEXT

A message to display if password is expired.

config.authn.credentials-change.url = URL

A URL to display if password is expired.

attrmap.map-principal-record.name = ID [map-principal-record]

Attribute map to map between principal record and native attributes.

attrmap.map-group-record.name = ID [map-group-record]

Attribute map to map between group record and native attributes.

config.authz.query.max_filter_size = INT [50]

A default maximum filter size in elements. Usually, should be set by configuration.

config.authz.sequence.namespace.attribute.namespace = ID [namespace]

Attribute name of namespace within the namespace query.

config.authn.sequence.authn.name = ID [authn]
config.authz.sequence.credentials-change.name = ID [credentials-change]
config.authz.sequence.namespace.name = ID [namespace]
config.authz.sequence.query-groups.name = ID [query-groups]
config.authz.sequence.query-principals.name = ID [query-principals]
config.authz.sequence.resolve-groups.name = ID [resolve-groups]
config.authz.sequence.resolve-principal.name = ID [resolve-principal]

How to contribute

All contributions are welcome - patches, bug reports, and documentation issues.

Submitting patches

Please submit patches to GitHub:ovirt-engine-extension-aaa-ldap If you are not familiar with the process, you can read about collaborating with pull requests on the GitHub website.

Found a bug or documentation issue?

To submit a bug or suggest an enhancement for oVirt Engine Extension AAA LDAP please use oVirt Bugzilla for ovirt-engine-extension-aaa-ldap product.

If you don't have a Bugzilla account, you can still report issues.

Still need help?

If you have any other questions or suggestions, you can join and contact us on the oVirt Users forum / mailing list.

Name		Name	Last commit message	Last commit date
Latest commit History 316 Commits
.automation		.automation
.copr		.copr
.github		.github
packaging		packaging
src		src
.gitignore		.gitignore
AUTHORS		AUTHORS
COPYING		COPYING
ChangeLog		ChangeLog
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
README.profile		README.profile
README.unboundid-ldapsdk		README.unboundid-ldapsdk
TODO		TODO
ovirt-engine-extension-aaa-ldap.spec.in		ovirt-engine-extension-aaa-ldap.spec.in
pom.xml		pom.xml

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Licenses found

Repository files navigation

oVirt Engine Extension AAA LDAP

oVirt 3.6/4.x

oVirt 3.5

IMPLEMENTATION NOTES

EXTENSION CONFIGURATION

REMOVING CONFIGURED PROFILE

PROFILE CONFIGURATION EXAMPLES

Single Sign-On for Virtual Machines

X.509 CERTIFICATE TRUST STORE

APACHE SSO CONFIGURATION

oVirt 3.x

oVirt 4.x

PROBLEM DETERMINATION

ADVANCED EXTENSION CONFIGURATION

How to contribute

Submitting patches

Found a bug or documentation issue?

Still need help?

About

Licenses found

Releases 1

Packages

Contributors 6

Languages

License

Licenses found

oVirt/ovirt-engine-extension-aaa-ldap

Folders and files

Latest commit

History

Repository files navigation

oVirt Engine Extension AAA LDAP

oVirt 3.6/4.x

oVirt 3.5

IMPLEMENTATION NOTES

EXTENSION CONFIGURATION

REMOVING CONFIGURED PROFILE

PROFILE CONFIGURATION EXAMPLES

Single Sign-On for Virtual Machines

X.509 CERTIFICATE TRUST STORE

APACHE SSO CONFIGURATION

oVirt 3.x

oVirt 4.x

PROBLEM DETERMINATION

ADVANCED EXTENSION CONFIGURATION

How to contribute

Submitting patches

Found a bug or documentation issue?

Still need help?

About

Resources

License

Licenses found

Stars

Watchers

Forks

Releases 1

Packages 0

Contributors 6

Languages

Packages