-
Notifications
You must be signed in to change notification settings - Fork 0
Calculate b-value images from two or more other b-value images using monoexponential, IVIM, or kurtosis models (for prostate mpMRI).
License
nslay/ComputeBValue
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
# # Copyright (c) 2018 Nathan Lay ([email protected]) # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. # IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # # Nathan Lay # Imaging Biomarkers and Computer-Aided Diagnosis Laboratory # National Institutes of Health # March 2017 # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. # IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # ####################################################################### # Introduction # ####################################################################### ComputeBValue is a tool that can calculate b-value images from one or more given b-value images (and optionally a given ADC image) using one of four different models. These include: mono exponential, intravoxel incoherent motion (IVIM), diffusion kurtosis (DK), and a combined DK and IVIM model. It can read vendor-specific formatted diffusion b-values from DICOM, solve for unknown b-values, and can write b-value, Apparent Diffusion Coefficient (ADC), kurtosis, and perfusion fraction images to medical image formats like MetaIO, NIFTI, as well as DICOM. As diffusion MRI sequences are often interleaves with b-values, this tool supports extracting individual b-value image volumes from such sequences! When the the tool cannot determine b-value from DICOM, it will attempt to solve for the unknown b-values (you must have ADC and know the initial b-value used, e.g. b=0). NOTE: The tool will automatically detect inverted b-value images and restore the images prior to computing the target b-value image. NOTE: This tool is especially designed for prostate mpMRI imaging. Model assumptions follow those in the following paper: Grant, Kinzya B., et al. "Comparison of calculated and acquired high b value diffusion-weighted imaging in prostate cancer." Abdominal imaging 40.3 (2015): 578-586. The source code is partly based on SortDicomFiles and StandardizeBValue from which this README is also partly based. https://github.com/nslay/SortDicomFiles https://github.com/nslay/StandardizeBValue ####################################################################### # Installing # ####################################################################### If a precompiled version is available for your operating system, either extract the archive where it best suits you, or copy the executable to the desired location. Once installed, the path to ComputeBValue should be added to PATH. Windows: Right-click on "Computer", select "Properties", then select "Advanced system settings." In the "System Properties" window, look toward the bottom and click the "Environment Variables" button. Under the "System variables" list, look for "Path" and select "Edit." Append the ";C:\Path\To\Folder" where "C:\Path\To\Folder\ComputeBValue.exe" is the path to the executable. Click "OK" and you are done. Linux: Use a text editor to open the file ~/.profile or ~/.bashrc Add the line export PATH="${PATH}:/path/to/folder" where /path/to/folder/ComputeBValue is the path to the executable. Save the file and you are done. ComputeBValue can also be compiled from source. Instructions are given in the "Building from Source" section. ####################################################################### # Usage # ####################################################################### Once installed, ComputeBValue must be run from the command line. In Windows this is accomplished using Command Prompt or PowerShell. Unix-like environments include terminals where commands may be issued. WINDOWS TIP: Command Prompt can be launched conveniently in a folder holding shift and right clicking in the folder's window and selecting "Open command window here." ComputeBValue accepts one or more given DICOM folders or DICOM files. DICOM files are used to deduce the folder and series UID of the DICOM series. As a quickstart example ComputeBValue -b 1500 mono C:\Path\To\6-ep2ddifftraDYNDIST-03788 will compute a b-1500 image on ProstateX-0026's diffusion series using the mono exponential model. The output of this command might look like Info: Loaded b = 50 Info: Loaded b = 400 Info: Loaded b = 800 Info: Calculating b-1500 Info: Saving b-value image to 'output.mha' ... You may change the output path using the -o flag. Providing an output file path without a file extension will result in a DICOM folder. For example ComputeBValue -b 1500 -o B1500Image mono 6-ep2ddifftraDYNDIST-03788 will produce a DICOM folder with the following file hierarchy B1500Image/ +-- 1.dcm +-- 2.dcm +-- 3.dcm +-- 4.dcm ... +-- 19.dcm You may also manually provide the bvalue of any medical image by appending, ":bvalue", to the end of the path. For example: ComputeBValue -b 1500 -o B1500Image mono C:\Path\To\b50.nii.gz:50 C:\Path\To\b400.nii.gz:400 C:\Path\To\b800.nii.gz:800 This example reads B50, B400 and B800 images from NIFTI files. This is useful for non-DICOM medical image formats that lack the extra meta-data as well as for DICOMs with missing information or undocumented vendor-specific tags for determining diffusion bvalue. There are additional flags for saving the calculated ADC (-a), perfusion fraction (-p), and kurtosis image (-k). You may additionally compress the output images (-c) as well as change the output DICOM series number for the calculated b-value image (-n). By default, the series number is 13701 for the calculated b-value image. Other images share a similar series number offset by values of 1-3 (e.g. 13702-4). As a special note, the perfusion fraction and kurtosis images are stored in non-DICOM medical images in floating point form. However, owing to limitations with ITK, perfusion and kurtosis image pixel values are scaled by 1000 and stored as integer values in DICOM. Both b-value and ADC images are unaffected and remain stored as integer values in both DICOM and non-DICOM formats. Lastly, ComputeBValue provides the below usage message when provided with the -h flag or no arguments. It's useful if you forget. Usage: ComputeBValue [-achkp] [-o outputPath] [-n seriesNumber] [-s BValueScaleFactor] [-A ADCImageFolder|ADCImageFile] [-I initialBValue] -b targetBValue mono|ivim|dk|dkivim diffusionFolder1|diffusionFile1[:bvalue] [diffusionFolder2|diffusionFile2[:bvalue] ...] Options: -a -- Save calculated ADC. The output path will have _ADC appended (folder --> folder_ADC or file.ext --> file_ADC.ext). -b -- Target b-value to calculate. -c -- Compress output. -h -- This help message. -k -- Save calculated kurtosis image. The output path will have _Kurtosis appended. -n -- Series number for calculated b-value image (default 13701). -o -- Output path which may be a folder for DICOM output or a medical image format file. -p -- Save calculated perfusion fraction image. The output path will have _Perfusion appended. -s -- Scale factor of target b-value image intensities (default 1.0). -A -- Load an existing ADC image to use for computing a b-value image. -I -- Initial expected b-value in a diffusion series of unknown b-values (default 0). ####################################################################### # Models # ####################################################################### This section briefly describes how the models are implemented. All models solve a least-squares minimization problem of the form: \ell(\theta) = \sum_{b \in B} (f(\theta) - \log(S_b/S_0))^2 where B is the set of b-values, S_b is a pixel intensity from a b-value image, and f(\theta) is the model predicting exponential terms. In addition to \theta, one S_b may be an unknown value to optimize for. The models are discussed in more detail in the following paper: Grant, Kinzya B., et al. "Comparison of calculated and acquired high b value diffusion-weighted imaging in prostate cancer." Abdominal imaging 40.3 (2015): 578-586. # Mono Exponential The mono exponential model relates S_b and D through the expression: S_b = S_0 exp(-bD) where D is the ADC value. This gives the parameters \theta = \{ D \} and the model function f(\theta) = -bD NOTE: This model can cope with the absence of S_0 using a mathematical trick. In this model, the ratio of two b-value image intensities is (S_a / S_0) / (S_b / S_0) = exp(-(a-b)D) With some rearrangement we have: S_a = S_b exp(-(a-b)D) Hence, by simply shifting by the minimum b-value, this model may be used to calculate any b-value image in the absence of a proper b-0 image (it may even be used to calculate the b-0 image!). # Intravoxel Incoherent Motion (IVIM) The IVIM model relates S_b, D, and f through the expression: S_b = S_0 (1-f) exp(-bD) where D is the ADC value and f is the perfusion fraction term This gives the parameters \theta = \{ D, f \} and the model function f(\theta) = ln(1-f) - bD NOTE: This model requires a b-0 image. In the absence of a b-0 image the mono exponential model is used to calculate it. # Diffusion Kurtosis (DK) The DK model relates S_b, D and K through the expression: S_b = S_0 exp(-bD + K(bD)^2/6) where D is the ADC value and K is the kurtosis term. This gives the parameters \theta = \{ D, K \} and the model function f(\theta) = -bD + K(bD)^2/6 NOTE: This model requires a b-0 image. In the absence of a b-0 image the mono exponential model is used to calculate it. # Combined Model (DK+IVIM) The DK+IVIM model relates S_b, D, K and f through the expression: S_b = S_0 (1-f) exp(-bD + K(bD)^2/6) where D is the ADC value, K is the kurtosis term and f is the perfusion fraction term. This gives the parameters \theta = \{ D, K, f \} and the model function f(\theta) = ln(1-f) - bD + K(bD)^2/6 NOTE: This model requires a b-0 image. In the absence of a b-0 image the mono exponential model is used to calculate it. NOTE: Depending on your images and assumptions, some of these models may be inappropriate! ####################################################################### # Building from Source # ####################################################################### To build ComputeBValue from source, you will need a recent version of CMake, a C++11 compiler, and InsightToolkit version 4 or later. First extract the source code somewhere. Next create a separate directory elsewhere. This will serve as the build directory. Run CMake and configure the source and build directories as chosen. More specifically On Windows: - Run cmake-gui (Look in Start Menu) and proceed from there. On Unix-like systems: - From a terminal, change directory to the build directory and then run: ccmake /path/to/source/directory In both cases, "Configure." If you encounter an error, set ITK_DIR and then run "Configure" again. Then select "Generate." On Unix-like systems, you may additionally want to set CMAKE_BUILD_TYPE to "Release" NOTE: ITK_DIR should be set to the cmake folder in the ITK lib folder. For example: /path/to/ITK/lib/cmake/ITK-4.13/ Visual Studio: - Open the solution in the build directory and build ComputeBValue. Make sure you select "Release" mode. Unix-like systems: - Run the "make" command. ComputeBValue has been successfully built and tested with: Microsoft Visual Studio 2017 and 2019 on Windows 10 Professional Clang 6.0.1 on FreeBSD 11.2-STABLE GCC 7.5.0 on Ubuntu 18.04 using ITK versions: ITK 5.1.1 ITK 4.9 ITK 4.13 ####################################################################### # Caveats # ####################################################################### Using absolute paths to Windows shares (i.e. \\name\folder) could cause problems since BaseName() and DirName() have not yet implemented parsing these kinds of paths.
About
Calculate b-value images from two or more other b-value images using monoexponential, IVIM, or kurtosis models (for prostate mpMRI).
Topics
Resources
License
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published