LCD Shields
Please help keep this list updated with new display shields that uses FBTFT. Add to the top of the list.
Product page: https://www.adafruit.com/products/2097
The FBTFT kernel and image doesn't support this display. Adafruit provides it's own kernel.
However, if you want to stick to the stock kernel source, it's pretty easy to add support for this screen this yourself. Simply modify "drivers/staging/fbtft/fb_ili9340.c" and change the width to 320 and height to 480. This is seemingly backwards, but that's because the screen is actually intended to be used in portrait orientation (imagine the screen in a phone). The Linux driver rotates 90 degrees for landscape orientation. The resistive touch controller works using the "stmpe-ts" driver.
Category page: http://www.neosecsolutions.com//index.php?cPath=17
Forum post: http://www.raspberrypi.org/forums/viewtopic.php?f=93&t=79120
Product page: http://www.watterott.com/en/RPi-Display
Github: https://github.com/watterott/RPi-Display
Matching case: http://www.watterott.com/index.php?page=product&info=3615
Product page: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=93&t=65566
Product page: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=93&t=69015
Product page: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=93&t=67004
Product page: http://www.adafruit.com/products/1601
Howto: http://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi
Custom FBTFT image: 2014-01-07-wheezy-raspbian-2014-03-12-fbtft-pitft.zip (wiki)
Product page: http://electronics.ilsoft.co.uk/PiShield.aspx
This shield has a joyswitch, and it can be used as a mouse or as a "keyboard". Since the shield doesn't have pullup resistors, we use the internal ones.
Mouse
sudo modprobe gpio_mouse
sudo modprobe gpio_mouse_device pullup polarity=1 up=23 down=17 left=18 right=27 bleft=22
FRAMEBUFFER=/dev/fb1 startx
Ref: gpio_mouse_device
Keyboard, arrow keys and Enter key
sudo modprobe gpio_keys
sudo modprobe gpio_keys_device pullup active_low keys=23:103,17:108,18:105,27:106,22:28
Ref: gpio_keys_device
This keyboard can be used with AdvanceMAME. Set in advance.rc
device_keyboard raw
Ref: MAME
Add to /etc/modules to make it permanent.
On Rev. 1 boards use GPIO 21 instead of 27.
Product page: https://www.kickstarter.com/projects/2135028730/piscreen-a-35-tft-with-touchscreen-for-the-raspber
Product page: http://www.watterott.com/en/RPi-ShieldBridge
Blog post: http://lallafa.de/blog/2013/07/watterotts-new-rpi-shieldbridge/
Raspberry Pi to Arduino Shield Bridge
Connect your Arduino Shields with your Raspberry Pi or use our popular MI0283QT- Adapter (2,8“ Color LCD + Touch).
OnBoard you find an ATmega328 with preprogrammed Arduino bootloader.
Product page: http://www.hwlevel.com/PI32/index.html
Forum thread: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=93&t=56131
This display is not supported by FBTFT. They provide a custom kernel.
Product page: https://github.com/Guzunty/Pi/wiki/LCD-Driver-Daughterboard
Product page: http://imall.iteadstudio.com/im130425001.html
Forum post: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=64&t=43702
It's not possible to use the touch panel as a Linux mouse with this adapter. The Touch IC is not wired to the Raspberry Pi SPI bus.
This is not strictly a display shield, but looks to be an interesting product.
Product page: http://www.dfrobot.com/index.php?route=product/product&product_id=1062
