Skip to content
Nicholas Adamou edited this page May 5, 2018 · 7 revisions

Getting Started

MiniPwner Default Settings

  • User: root / Password: minipwner
  • Wireless (wlan0): not enabled by default
  • Wired (eth0):
    • IP: 192.168.1.1
    • Netmask: 255.255.255.0
    • Port 22 is open by default for ssh access

Basic Penetration Test Preparation

  1. Insert the provided USB drive into the 3G port of the TP-Link
  2. Plug the provided network cable into the Ethernet port of the MiniPwner and your computer.
  3. Set a static IP on your computer's Ethernet port to 192.168.1.2/24.
  4. Provide power to the MiniPwner by plugging it into a wall outlet or into an open USB port on your computer.
  5. Wait for the MiniPwner to boot (~ 30 seconds).
  6. Use an SSH client (such as PuTTY) to access the MiniPwner @ 192.168.1.1 on port 22.
  7. Login as root, password minipwner.

Please Note: I strongly recommend that you set a new root password using passwd

Clone this wiki locally