fix#2358, adds TIME module command to set CFE_TIME_Print() format

modules/core_api/fsw/inc/cfe_error.h

@@ -1362,6 +1362,15 @@ char *CFE_ES_StatusToString(CFE_Status_t status, CFE_StatusString_t *status_stri
  *
  */
 #define CFE_TIME_BAD_ARGUMENT ((CFE_Status_t)0xce000005)
+
+/**
+ * @brief Time Format Production Too Long
+ *
+ * The formatting of a time into a string would overflow the
+ * output buffer length of CFE_TIME_PRINTED_STRING_SIZE.
+ *
+ */
+#define CFE_TIME_FORMAT_TOO_LONG ((CFE_Status_t)0xce000006)
 /**@}*/
 
 #endif /* CFE_ERROR_H */

modules/core_api/fsw/inc/cfe_time_api_typedefs.h

@@ -42,7 +42,10 @@
 */
 
 #define CFE_TIME_PRINTED_STRING_SIZE \
-    24 /**< \brief Required size of buffer to be passed into #CFE_TIME_Print (includes null terminator) */
+    32 /**< \brief Required size of buffer to be passed into #CFE_TIME_Print (includes null terminator) */
+
+#define CFE_TIME_FORMAT_SIZE \
+    32 /**< \brief The maximum length we will accept for the format string (incl. null)--affects cmd and tlm */
 
 /*****************************************************************************/
 /*

modules/time/config/default_cfe_time_extern_typedefs.h

@@ -279,4 +279,29 @@ enum CFE_TIME_SetState
  */
 typedef uint8 CFE_TIME_SetState_Enum_t;
 
+enum CFE_TIME_PrintState
+{
+    /**
+     * @brief Print timestamp using format string.
+     */
+    CFE_TIME_PrintState_DateTime       = 0,
+
+    /**
+     * @brief Print secs+micros since start/reset.
+     */
+    CFE_TIME_PrintState_SecsSinceStart = 1,
+
+    /**
+     * @brief Do not print timestamps at all.
+     */
+    CFE_TIME_PrintState_None           = 2
+};
+
+/**
+ * @brief Time print status values (how to print timestamps)
+ *
+ * @sa enum CFE_TIME_PrintState
+ */
+typedef uint8 CFE_TIME_PrintState_Enum_t;
+
 #endif /* CFE_TIME_EXTERN_TYPEDEFS_H */

modules/time/config/default_cfe_time_fcncodes.h

@@ -689,6 +689,28 @@
 **  \sa #CFE_TIME_SET_STATE_CC, #CFE_TIME_SET_SOURCE_CC
 */
 #define CFE_TIME_SET_SIGNAL_CC 15 /* set clock signal (pri vs red) */
+
+/** \cfetimecmd Set Print Format Options
+**
+**  \par Description
+**       This command sets the time print mode/format (used by EVS when sending
+**       to stdout, and by ES for syslog messages).
+**
+**  \cfecmdmnemonic \TIME_SETPRINT
+**
+**  \par Command Structure
+**       #CFE_TIME_SetPrintCmd_t
+**
+**  \par Command Verification
+**       Successful execution of this command may be verified by examining
+**       housekeeping output from the TIME module.
+**
+**  \par Criticality
+**       This command is non-critical, usually used in ground systems and
+**       doing ground tests.
+*/
+#define CFE_TIME_SET_PRINT_CC 16 /* set print format command */
+
 /** \} */
 
 #endif

modules/time/config/default_cfe_time_interface_cfg.h

@@ -198,4 +198,17 @@
 */
 #define CFE_MISSION_TIME_FS_FACTOR 789004800
 
+/**
+ ** \brief On boot, define the time print type.
+ */
+#define CFE_TIME_PRINT_DEFAULT CFE_TIME_PrintState_DateTime
+
+/**
+ ** \brief On boot, the CFE_TIME_Print() function will use
+ ** the following strftime-like (+ microseconds) format
+ ** when "printing" times. (Only relevant if CFE_TIME_PRINT_DEFAULT
+ ** is set to CFE_TIME_PrintState_DateTime.)
+ */
+#define CFE_TIME_PRINTFMT_DEFAULT "%Y-%j %H:%M:%S.%f"
+
 #endif

modules/time/config/default_cfe_time_msgstruct.h

@@ -97,6 +97,24 @@ typedef struct CFE_TIME_SetStateCmd
     CFE_TIME_StateCmd_Payload_t Payload;       /**< \brief Command payload */
 } CFE_TIME_SetStateCmd_t;
 
+/**
+ * \brief Payload for the command to set the time print format
+ */
+typedef struct CFE_TIME_SetPrintCmd_Payload
+{
+    CFE_TIME_PrintState_Enum_t PrintState;
+    char PrintFormat[CFE_TIME_FORMAT_SIZE];
+} CFE_TIME_SetPrintCmd_Payload_t;
+
+/**
+ * \brief Command to set the time print format
+ */
+typedef struct CFE_TIME_SetPrintCmd
+{
+    CFE_MSG_CommandHeader_t        CommandHeader; /**< \brief Command header */
+    CFE_TIME_SetPrintCmd_Payload_t Payload;
+} CFE_TIME_SetPrintCmd_t;
+
 /**
  * \brief Set time data source command payload
  */
@@ -273,6 +291,9 @@ typedef struct CFE_TIME_HousekeepingTlm_Payload
     uint32 SubsecsDelay; /**< \cfetlmmnemonic \TIME_1HZDLYSSECS
                               \brief Current 1 Hz SCTF Delay (sub-seconds) */
 #endif
+
+    CFE_TIME_PrintState_Enum_t PrintState;
+    char PrintFormat[CFE_TIME_FORMAT_SIZE];
 } CFE_TIME_HousekeepingTlm_Payload_t;
 
 typedef struct CFE_TIME_HousekeepingTlm

modules/time/fsw/src/cfe_time_api.c

@@ -567,27 +567,78 @@ uint32 CFE_TIME_Micro2SubSecs(uint32 MicroSeconds)
  *-----------------------------------------------------------------*/
 CFE_Status_t CFE_TIME_Print(char *PrintBuffer, CFE_TIME_SysTime_t TimeToPrint)
 {
-    size_t    FmtLen = 0;
-    uint32    Micros = (CFE_TIME_Sub2MicroSecs(TimeToPrint.Subseconds) + CFE_MISSION_TIME_EPOCH_MICROS) / 10;
+    uint32 mic    = (CFE_TIME_Sub2MicroSecs(TimeToPrint.Subseconds) + CFE_MISSION_TIME_EPOCH_MICROS) / 10;
+    time_t sec    = TimeToPrint.Seconds + CFE_MISSION_TIME_EPOCH_SECONDS; // epoch is Jan 1, 1980
+    /* temporary buffer to store the format so we can modify it to blot '%f' */
+    char FmtBuf[CFE_TIME_FORMAT_SIZE];
+    char *FmtPtr = FmtBuf;
+    char *PctF;
+    size_t OutChrs = 0;
     struct tm tm;
+    size_t TimeSz;
 
     if (PrintBuffer == NULL)
     {
         return CFE_TIME_BAD_ARGUMENT;
     }
 
-    time_t sec = TimeToPrint.Seconds + CFE_MISSION_TIME_EPOCH_SECONDS; // epoch is Jan 1, 1980
-    gmtime_r(&sec, &tm);
-    FmtLen = strftime(PrintBuffer, CFE_TIME_PRINTED_STRING_SIZE - 6, "%Y-%j-%H:%M:%S", &tm);
-    PrintBuffer += FmtLen;
-    *(PrintBuffer++) = '.';
-
-    *(PrintBuffer++) = '0' + (char)((Micros % 100000) / 10000);
-    *(PrintBuffer++) = '0' + (char)((Micros % 10000) / 1000);
-    *(PrintBuffer++) = '0' + (char)((Micros % 1000) / 100);
-    *(PrintBuffer++) = '0' + (char)((Micros % 100) / 10);
-    *(PrintBuffer++) = '0' + (char)(Micros % 10);
-    *PrintBuffer     = '\0';
+    switch (CFE_TIME_Global.PrintState)
+    {
+        case CFE_TIME_PrintState_DateTime:
+            gmtime_r(&sec, &tm);
+
+            strncpy(FmtPtr, CFE_TIME_Global.PrintFormat, CFE_TIME_FORMAT_SIZE);
+
+            while(*FmtPtr != '\0' && OutChrs < CFE_TIME_PRINTED_STRING_SIZE)
+            {
+                /* if we have "%f", call strftime for string before and string after */
+                PctF = strstr(FmtBuf, "%f");
+                if (PctF)
+                {
+                    *PctF = '\0'; /* blot out "%f", for now */
+                }
+
+                TimeSz = strftime(PrintBuffer + OutChrs, CFE_TIME_PRINTED_STRING_SIZE - OutChrs, FmtPtr, &tm);
+
+                if (*FmtPtr && TimeSz == 0)
+                {
+                    /* strftime returns 0 if the buffer is too small */
+                    return CFE_TIME_FORMAT_TOO_LONG;
+                }
+
+                OutChrs += TimeSz;
+
+                /* we found/blotted %f above */
+                if (PctF)
+                {
+                    /* write %f value */
+                    if (OutChrs < CFE_TIME_PRINTED_STRING_SIZE - 5)
+                    {
+                        OutChrs += snprintf(PrintBuffer + OutChrs, CFE_TIME_PRINTED_STRING_SIZE - OutChrs, "%05d", mic);
+                    }
+                    else
+                    {
+                        return CFE_TIME_FORMAT_TOO_LONG;
+                    }
+
+                    /* go back through the loop with the remaining format */
+                    FmtPtr = PctF + 2;
+                }
+                else
+                {
+                    PrintBuffer[OutChrs] = '\0'; /* just in case, null-terminate the string */
+                    break; /* break while */
+                }
+            }
+            break;
+        case CFE_TIME_PrintState_SecsSinceStart:
+            OutChrs += snprintf(PrintBuffer, CFE_TIME_PRINTED_STRING_SIZE, "%ld.%06d", (long int)sec, mic);
+            PrintBuffer[OutChrs] = '\0';
+            break;
+        default:
+            PrintBuffer[0] = '\0';
+            break;
+    }
     return CFE_SUCCESS;
 }
 

modules/time/fsw/src/cfe_time_dispatch.c

@@ -240,6 +240,13 @@ void CFE_TIME_TaskPipe(const CFE_SB_Buffer_t *SBBufPtr)
                     }
                     break;
 
+                case CFE_TIME_SET_PRINT_CC:
+                    if (CFE_TIME_VerifyCmdLength(&SBBufPtr->Msg, sizeof(CFE_TIME_SetPrintCmd_t)))
+                    {
+                        CFE_TIME_SetPrintCmd((const CFE_TIME_SetPrintCmd_t *)SBBufPtr);
+                    }
+                    break;
+
                 default:
 
                     CFE_TIME_Global.CommandErrorCounter++;

modules/time/fsw/src/cfe_time_task.c

@@ -1090,3 +1090,16 @@ int32 CFE_TIME_Sub1HZAdjustmentCmd(const CFE_TIME_Sub1HZAdjustmentCmd_t *data)
     CFE_TIME_1HzAdjImpl(&data->Payload, CFE_TIME_AdjustDirection_SUBTRACT);
     return CFE_SUCCESS;
 }
+
+/*----------------------------------------------------------------
+ *
+ * Application-scope internal function
+ * See description in header file for argument/return detail
+ *
+ *-----------------------------------------------------------------*/
+int32 CFE_TIME_SetPrintCmd(const CFE_TIME_SetPrintCmd_t *data)
+{
+    CFE_TIME_Global.PrintState = data->Payload.PrintState;
+    strncpy(CFE_TIME_Global.PrintFormat, data->Payload.PrintFormat, CFE_TIME_FORMAT_SIZE);
+    return CFE_SUCCESS;
+}

modules/time/fsw/src/cfe_time_utils.c

@@ -353,6 +353,12 @@ void CFE_TIME_InitData(void)
     */
     CFE_MSG_Init(CFE_MSG_PTR(CFE_TIME_Global.Local1HzCmd.CommandHeader), CFE_SB_ValueToMsgId(CFE_TIME_1HZ_CMD_MID),
                  sizeof(CFE_TIME_Global.Local1HzCmd));
+
+    /*
+    ** Configure the default time print format.
+    */
+    CFE_TIME_Global.PrintState = CFE_TIME_PRINT_DEFAULT;
+    strncpy(CFE_TIME_Global.PrintFormat, CFE_TIME_PRINTFMT_DEFAULT, CFE_TIME_FORMAT_SIZE);
 }
 
 /*----------------------------------------------------------------
@@ -408,6 +414,9 @@ void CFE_TIME_GetHkData(const CFE_TIME_Reference_t *Reference)
     CFE_TIME_Global.HkPacket.Payload.SecondsDelay = Reference->AtToneDelay.Seconds;
     CFE_TIME_Global.HkPacket.Payload.SubsecsDelay = Reference->AtToneDelay.Subseconds;
 #endif
+
+    strncpy(CFE_TIME_Global.HkPacket.Payload.PrintFormat, CFE_TIME_Global.PrintFormat, CFE_TIME_FORMAT_SIZE);
+    CFE_TIME_Global.HkPacket.Payload.PrintState = CFE_TIME_Global.PrintState;
 }
 
 /*----------------------------------------------------------------

modules/time/fsw/src/cfe_time_utils.h

@@ -312,6 +312,16 @@ typedef struct
     ** One callback per app is allowed
     */
     CFE_TIME_SynchCallbackRegEntry_t SynchCallback[CFE_PLATFORM_ES_MAX_APPLICATIONS];
+
+    /*
+    ** What form should CFE_TIME_Print produce.
+    */
+    CFE_TIME_PrintState_Enum_t PrintState;
+
+    /*
+    ** For formatted CFE_TIME_Print output, use this format string.
+    */
+    char PrintFormat[CFE_TIME_FORMAT_SIZE];
 } CFE_TIME_Global_t;
 
 /*
@@ -867,4 +877,10 @@ int32 CFE_TIME_Sub1HZAdjustmentCmd(const CFE_TIME_Sub1HZAdjustmentCmd_t *data);
  */
 int32 CFE_TIME_SubAdjustCmd(const CFE_TIME_SubAdjustCmd_t *data);
 
+/*---------------------------------------------------------------------------------------*/
+/**
+ * @brief  Time task ground command (print format adjust)
+ */
+int32 CFE_TIME_SetPrintCmd(const CFE_TIME_SetPrintCmd_t *data);
+
 #endif /* CFE_TIME_UTILS_H */