Increase version to 6.7.15 and update README

README.md

@@ -8,33 +8,48 @@ This is a collection of services and associated framework to be located in the `
 
 ## Version History
 
+#### Development Build: 6.7.15
+
+- Upon power on reset, default system log mode set to overwrite. Upon processor reset, default system log mode set to discard.
+- No longer locks while locked (no issue observed on linux/posix, but user reported issue on FreeRTOS 10)
+- Internal `CFE_TBL_LoadFromFile()` API changed slightly to add AppName as a parameter. Return value from `LoadFromFile()` no longer relevant for event generation.
+- Updates `CFE_TBL_CleanUpApp` such that it now checks the 'used flag' prior to calling `CFE_TBL_RemoveAccessLink` for a given TblHandle. Also sets the AppId to `CFE_TBL_NOT_OWNED` after removing the access descriptor link from linked list.
+- Removed `OS_FS_SUCCESS, OS_FS_ERROR , OS_FS_ERR_INVALID_POINTER, OS_FS_ERR_NO_FREE_FDS , OS_FS_ERR_INVALID_FD, and OS_FS_UNIMPLEMENTED` from `osapi-os-filesys.h`
+- See https://github.com/nasa/cFE/pull/649 for more details
+
 #### Development Build: 6.7.14
+
 - Exposes the `CFE_SB_IsValidMsgId()` for application usage.
 - `CFE_SB_GetLastSenderID` will now detect if it is being called prior to a message being sent on a given pipe.
 - Mismatches between PSP/BSP/OS are now detected and warned about during make prep. Only the `CFE_SYSTEM_PSPNAME` is actually required to be specified for a CFE build now. Others can be omitted.
 - See https://github.com/nasa/cFE/pull/635 for more details
 
 #### Development Build: 6.7.13
+
 - RTEMS builds without error.
 - Use the INTERFACE_COMPILE_DEFINITIONS and INTERFACE_INCLUDE_DIRECTORIES properties from the osal target and apply them to the entire CFE build as a directory-scope property. No impact until these are set in OSAL.
 - Minor other updates (see https://github.com/nasa/cFE/pull/615)
 
 #### Development Build: 6.7.12
+
 - Cmd code (and checksum) are always in the same place (matches GSFC spec for command secondary header)
 - No impact to behavior. Previously the perf log dump file frequently contained errors due to out of order or otherwise corrupted entries, which is now fixed.
 - Minor other updates (see https://github.com/nasa/cFE/pull/586)
 
 #### Development Build: 6.7.11
+
 - Improve documentation
 - Update makefile to report branch coverage
 - Minor other updates (see https://github.com/nasa/cFE/pull/566)
 
 #### Development Build: 6.7.10
+
 - Fix potential unit test problems with name collisions
 - Improve documentation
 - Minor other updates (see https://github.com/nasa/cFE/pull/563)
 
 #### Development Build: 6.7.9
+
 - No longer requires sed "hack" to change the setting in default_config.h  
 - Minor other updates (see https://github.com/nasa/cFE/pull/544)
 
@@ -45,41 +60,50 @@ This is a collection of services and associated framework to be located in the `
 - Minor other updates (see https://github.com/nasa/cFE/pull/530)
 
 #### Development Build: 6.7.7
+
 - Adds a new function, CFE_SB_GetPipeIdByName, which retrieves the pipe ID given a name of a pipe.
 - Improvement in error reporting when using a pipe name that is already in use, or when the queue limit has been reached.
 - Added userguide and osalguide to the local target list to avoid makefile warning
 - Minor other updates (see https://github.com/nasa/cFE/pull/511)
 
 #### Development Build: 6.7.6
+
 - Adds OMIT_DEPRECATED prep flag
 - Adds and enforces strict warnings
 - Software Bus now increments sequence counter even if there are no subscribers
 - Warning, comment, and code coverage cleanup (see https://github.com/nasa/cFE/pull/490)
 
 #### Development Build: 6.7.5
+
 - Added CI static analysis check
 - Resolved static analysis warnings
 - Minor other updates (see https://github.com/nasa/cFE/pull/479)
 
 #### Development Build: 6.7.4
+
 - Minor updates (see https://github.com/nasa/cFE/pull/448)
 
 #### Development Build: 6.7.3
+
 - Minor updates (see https://github.com/nasa/cFE/pull/413)
 
 #### Development Build: 6.7.2
+
 - Minor bugs and enhancements (see https://github.com/nasa/cFE/pull/388)
 
 #### Development Build: 6.7.1
+
 - Fix strlen in CFE_ES_TaskInit https://github.com/nasa/cFE/pull/23
 - Minor bug fixes (see https://github.com/nasa/cFE/pull/378)
 
 ### ***OFFICIAL RELEASE: 6.7.0***
+
 - This is a point release from an internal repository
 - Changes are detailed in [cFS repo](https://github.com/nasa/cFS) release documentation
 - Apache 2.0
 
 ### ***OFFICIAL RELEASE: 6.6.0a***
+
 - This is a point release from an internal repository
 - Apache 2.0
 - Additional release notes are found in [release notes](https://github.com/nasa/cFE/blob/v6.6.0a/docs/cFE_release_notes.md)

fsw/cfe-core/src/inc/cfe_version.h

@@ -95,7 +95,7 @@
 */
 #define CFE_MAJOR_VERSION         6
 #define CFE_MINOR_VERSION         7
-#define CFE_REVISION              14
+#define CFE_REVISION              15
 
 
 #endif  /* _cfe_version_ */