RC 1.3.1 Review

.github/workflows/build.yml

@@ -18,9 +18,26 @@ jobs:
     - name: Update
       run: sudo apt-get update
     - name: Install Dependencies
-      run: sudo apt-get install -y lcov libcurl4-openssl-dev libmariadb-dev libmariadb-dev-compat libgcrypt20-dev python3 
+      run: sudo apt-get install -y lcov libcurl4-openssl-dev libmariadb-dev libmariadb-dev-compat python3 
     - name: Install Python Libraries
       run: sudo pip install pycryptodome
+    - name: Install Libgcrypt
+      run: >
+        curl  
+        -LS https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-1.50.tar.bz2 
+        -o /tmp/libgpg-error-1.50.tar.bz2 
+        && tar -xjf /tmp/libgpg-error-1.50.tar.bz2 -C /tmp/ 
+        && cd /tmp/libgpg-error-1.50 
+        && sudo ./configure 
+        && sudo make install 
+        && curl  
+        -LS https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.11.0.tar.bz2 
+        -o /tmp/libgcrypt-1.11.0.tar.bz2 
+        && tar -xjf /tmp/libgcrypt-1.11.0.tar.bz2 -C /tmp/ 
+        && cd /tmp/libgcrypt-1.11.0 
+        && sudo ./configure 
+        && sudo make install
+        && sudo ldconfig
     # End Container Setup
 
     - name: Minimal Build Script
@@ -38,9 +55,26 @@ jobs:
     - name: Update
       run: sudo apt-get update
     - name: Install Dependencies
-      run: sudo apt-get install -y lcov libcurl4-openssl-dev libmariadb-dev libmariadb-dev-compat libgcrypt20-dev python3
+      run: sudo apt-get install -y lcov libcurl4-openssl-dev libmariadb-dev libmariadb-dev-compat python3
     - name: Install Python Libraries
       run: sudo pip install pycryptodome
+    - name: Install Libgcrypt
+      run: >
+        curl  
+        -LS https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-1.50.tar.bz2 
+        -o /tmp/libgpg-error-1.50.tar.bz2 
+        && tar -xjf /tmp/libgpg-error-1.50.tar.bz2 -C /tmp/ 
+        && cd /tmp/libgpg-error-1.50 
+        && sudo ./configure 
+        && sudo make install 
+        && curl  
+        -LS https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.11.0.tar.bz2 
+        -o /tmp/libgcrypt-1.11.0.tar.bz2 
+        && tar -xjf /tmp/libgcrypt-1.11.0.tar.bz2 -C /tmp/ 
+        && cd /tmp/libgcrypt-1.11.0 
+        && sudo ./configure 
+        && sudo make install
+        && sudo ldconfig
     # End Container Setup
 
     - name: Internal Build Script
@@ -52,31 +86,61 @@ jobs:
       run: make gcov
 
     - name: Upload 
-      uses: codecov/codecov-action@v3
+      uses: codecov/codecov-action@v4
       env:
         CODECOV_TOKEN: 71699f25-12a3-44a4-8a83-be777b9e577a
       with:
         files: 'coverage/*.c.gcov'
+        verbose: true
 
   #
   # KMC Build
   #
-  kmc_build:
-    # Container Setup
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v2
-    - name: Update
-      run: sudo apt-get update
-    - name: Install Dependencies
-      run: sudo apt-get install -y lcov libcurl4-openssl-dev libmariadb-dev libmariadb-dev-compat libgcrypt20-dev python3
-    - name: Install Python Libraries
-      run: sudo pip install pycryptodome
-    # End Container Setup
+  # kmc_build:
+  #   # Container Setup
+  #   runs-on: ubuntu-latest
+  #   steps:
+  #   - uses: actions/checkout@v2
+  #   - name: Update
+  #     run: sudo apt-get update
+  #   - name: Install Dependencies
+  #     run: sudo apt-get install -y lcov libcurl4-openssl-dev libmariadb-dev libmariadb-dev-compat python3
+  #   - name: Install Python Libraries
+  #     run: sudo pip install pycryptodome
+  #   - name: Install Libgcrypt
+  #     run: >
+  #       curl  
+  #       -LS https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-1.50.tar.bz2 
+  #       -o /tmp/libgpg-error-1.50.tar.bz2 
+  #       && tar -xjf /tmp/libgpg-error-1.50.tar.bz2 -C /tmp/ 
+  #       && cd /tmp/libgpg-error-1.50 
+  #       && sudo ./configure 
+  #       && sudo make install 
+  #       && curl  
+  #       -LS https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.11.0.tar.bz2 
+  #       -o /tmp/libgcrypt-1.11.0.tar.bz2 
+  #       && tar -xjf /tmp/libgcrypt-1.11.0.tar.bz2 -C /tmp/ 
+  #       && cd /tmp/libgcrypt-1.11.0 
+  #       && sudo ./configure 
+  #       && sudo make install
+  #       && sudo ldconfig
+  #   # End Container Setup
 
-    - name: KMC Build Script
-      working-directory: ${{github.workspace}}
-      run: bash ${GITHUB_WORKSPACE}/support/scripts/build_kmc.sh
+  #   - name: KMC Build Script
+  #     working-directory: ${{github.workspace}}
+  #     run: bash ${GITHUB_WORKSPACE}/support/scripts/build_kmc.sh
+
+  #   - name: Code-Coverage
+  #     working-directory: ${{github.workspace}}
+  #     run: make gcov
+
+  #   - name: Upload 
+  #     uses: codecov/codecov-action@v4
+  #     env:
+  #       CODECOV_TOKEN: 71699f25-12a3-44a4-8a83-be777b9e577a
+  #     with:
+  #       files: 'coverage/*.c.gcov'
+  #       verbose: true
 
   #
   # Wolf Build
@@ -89,9 +153,26 @@ jobs:
     - name: Update
       run: sudo apt-get update
     - name: Install Dependencies
-      run: sudo apt-get install -y lcov libcurl4-openssl-dev libmariadb-dev libmariadb-dev-compat libgcrypt20-dev python3 autoconf libtool
+      run: sudo apt-get install -y lcov libcurl4-openssl-dev libmariadb-dev libmariadb-dev-compat python3 autoconf libtool
     - name: Install Python Libraries
       run: sudo pip install pycryptodome
+    - name: Install Libgcrypt
+      run: >
+        curl  
+        -LS https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-1.50.tar.bz2 
+        -o /tmp/libgpg-error-1.50.tar.bz2 
+        && tar -xjf /tmp/libgpg-error-1.50.tar.bz2 -C /tmp/ 
+        && cd /tmp/libgpg-error-1.50 
+        && sudo ./configure 
+        && sudo make install 
+        && curl  
+        -LS https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.11.0.tar.bz2 
+        -o /tmp/libgcrypt-1.11.0.tar.bz2 
+        && tar -xjf /tmp/libgcrypt-1.11.0.tar.bz2 -C /tmp/ 
+        && cd /tmp/libgcrypt-1.11.0 
+        && sudo ./configure 
+        && sudo make install
+        && sudo ldconfig
     - name: Clone WolfSSL
       run: git clone --depth 1 --branch v5.6.0-stable https://github.com/wolfSSL/wolfssl.git /tmp/wolfssl
 
@@ -101,7 +182,7 @@ jobs:
       #run: cd /tmp/wolfssl/;
       #     sudo chown -R runner /usr/local; 
       #     ./autogen.sh;
-      #     ./configure --enable-aesccm --enable-aessiv --enable-cmac;
+      #     sudo ./configure --enable-aesccm --enable-aessiv --enable-cmac;
       #     make;
       #     make install;
       #sudo chown -R runner /usr/local;
@@ -116,3 +197,71 @@ jobs:
     - name: Wolf Build Script
       working-directory: ${{github.workspace}}
       run: bash ${GITHUB_WORKSPACE}/support/scripts/build_wolf.sh
+
+    - name: Code-Coverage
+      working-directory: ${{github.workspace}}
+      run: make gcov
+
+    - name: Upload 
+      uses: codecov/codecov-action@v4
+      env:
+        CODECOV_TOKEN: 71699f25-12a3-44a4-8a83-be777b9e577a
+      with:
+        files: 'coverage/*.c.gcov'
+        verbose: true
+
+  #
+  # RHEL Build
+  #
+  rhel_build:
+    # Container Setup
+    runs-on: ubuntu-latest
+    container:
+      image: rockylinux/rockylinux:8
+    steps:
+    - uses: actions/checkout@v2
+    - name: Update
+      run: yum update -y
+    - name: Install Dependencies
+      run: yum install -y epel-release python38-devel libcurl-devel git cmake gcc java-11-openjdk-devel openssl wget bzip2 ldconfig mariadb-devel mariadb-common mariadb-connector-c mariadb-connector-c-config mariadb-errmsg mariadb-gssapi-server
+      # Might want to trim this down, but these dependencies should work for KMC
+    - name: install lcov
+      run: yum install -y --enablerepo=epel lcov
+    - name: Install Python Dependencies
+      run: pip3 install pycryptodome
+    - name: Install Libgcrypt
+      run: >
+        curl 
+        -LS https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-1.50.tar.bz2 
+        -o /tmp/libgpg-error-1.50.tar.bz2 
+        && tar -xjf /tmp/libgpg-error-1.50.tar.bz2 -C /tmp/ 
+        && cd /tmp/libgpg-error-1.50 
+        && ./configure 
+        && make install 
+        && curl  
+        -LS https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.11.0.tar.bz2 
+        -o /tmp/libgcrypt-1.11.0.tar.bz2 
+        && tar -xjf /tmp/libgcrypt-1.11.0.tar.bz2 -C /tmp/ 
+        && cd /tmp/libgcrypt-1.11.0 
+        && ./configure 
+        && make install  
+        && echo "export LD_LIBRARY_PATH=/usr/local/lib/:/usr/local/include:$LD_LIBRARY_PATH" >> ~/.bashrc 
+        && source ~/.bashrc 
+        && ldconfig
+    # End Container Setup
+
+    - name: RHEL Build Script
+      working-directory: ${{github.workspace}}
+      run: source ~/.bashrc && ${GITHUB_WORKSPACE}/support/scripts/build_rhel.sh
+
+    - name: Code-Coverage
+      working-directory: ${{github.workspace}}
+      run: source ~/.bashrc && make gcov
+
+    - name: Upload 
+      uses: codecov/codecov-action@v4
+      env:
+        CODECOV_TOKEN: 71699f25-12a3-44a4-8a83-be777b9e577a
+      with:
+        files: 'coverage/*.c.gcov'
+        verbose: true