Feature: Add Power and Fan Speed to Benchmark Results #5
Conversation
|
""" WalkthroughVoltage and frequency increment steps were reduced, maximum power lowered, and ASIC count defaulted to one. Fan speed data was added to the benchmarking process, collected alongside other metrics, averaged, and included in outputs. A new Changes
Poem
Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out. 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
SupportNeed help? Create a ticket on our support page for assistance with any issues or questions. Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 0
🔭 Outside diff range comments (1)
bitaxe_hashrate_benchmark.py (1)
200-200: Critical: Inconsistent return value count causing unpacking errors.The
benchmark_iterationfunction has inconsistent return signatures across different code paths. The successful case (line 310) returns 8 values, but all error cases return only 6 values. This will cause ValueError when unpacking at line 361.Additionally, line 310 references an undefined variable
error_reasonin the success case.Apply this fix to make return values consistent:
# Fix all error return statements to return 8 values - return None, None, None, False, None, "SYSTEM_INFO_FAILURE" + return None, None, None, False, None, None, None, "SYSTEM_INFO_FAILURE" - return None, None, None, False, None, "TEMPERATURE_DATA_FAILURE" + return None, None, None, False, None, None, None, "TEMPERATURE_DATA_FAILURE" - return None, None, None, False, None, "TEMPERATURE_BELOW_5" + return None, None, None, False, None, None, None, "TEMPERATURE_BELOW_5" - return None, None, None, False, None, "CHIP_TEMP_EXCEEDED" + return None, None, None, False, None, None, None, "CHIP_TEMP_EXCEEDED" - return None, None, None, False, None, "VR_TEMP_EXCEEDED" + return None, None, None, False, None, None, None, "VR_TEMP_EXCEEDED" - return None, None, None, False, None, "INPUT_VOLTAGE_BELOW_MIN" + return None, None, None, False, None, None, None, "INPUT_VOLTAGE_BELOW_MIN" - return None, None, None, False, None, "INPUT_VOLTAGE_ABOVE_MAX" + return None, None, None, False, None, None, None, "INPUT_VOLTAGE_ABOVE_MAX" - return None, None, None, False, None, "HASHRATE_POWER_DATA_FAILURE" + return None, None, None, False, None, None, None, "HASHRATE_POWER_DATA_FAILURE" - return None, None, None, False, None, "POWER_CONSUMPTION_EXCEEDED" + return None, None, None, False, None, None, None, "POWER_CONSUMPTION_EXCEEDED" - return None, None, None, False, None, "ZERO_HASHRATE" + return None, None, None, False, None, None, None, "ZERO_HASHRATE" # Fix the success case to define error_reason - return average_hashrate, average_temperature, efficiency_jth, hashrate_within_tolerance, average_vr_temp, average_power, average_fan_speed, error_reason + return average_hashrate, average_temperature, efficiency_jth, hashrate_within_tolerance, average_vr_temp, average_power, average_fan_speed, None - return None, None, None, False, None, "NO_DATA_COLLECTED" + return None, None, None, False, None, None, None, "NO_DATA_COLLECTED"Also applies to: 207-207, 211-211, 216-216, 220-220, 224-224, 228-228, 236-236, 240-240, 294-294, 310-310, 313-313
🧹 Nitpick comments (1)
bitaxe_hashrate_benchmark.py (1)
379-381: Remove duplicate fan speed assignment.The averageFanSpeed is already assigned on line 371, making this conditional assignment redundant and potentially confusing.
- if avg_fan_speed is not None: - result["averageFanSpeed"] = avg_fan_speed -
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
bitaxe_hashrate_benchmark.py(11 hunks)
🔇 Additional comments (11)
bitaxe_hashrate_benchmark.py (11)
37-47: Configuration values updated to more conservative settings.The reduced increments and limits appear reasonable for safer benchmarking operations. The more conservative approach should help prevent hardware damage during testing.
192-192: Fan speed collection properly initialized.The fan_speeds list is correctly initialized to collect fan speed data during benchmark iterations.
232-232: Fan speed data retrieval implemented correctly.The fan speed is properly retrieved from the API response with appropriate null handling.
247-249: Fan speed data collection with proper null checking.The conditional append ensures fan speed data is only collected when available, preventing null values in the dataset.
296-300: Fan speed averaging and display implemented correctly.The average fan speed calculation properly handles the case where no fan speed data is available, and the output formatting is consistent with other metrics.
361-361: Function call unpacking matches expected return signature.The unpacking correctly expects 8 values, which matches the intended return signature after the critical bug fix above is applied.
369-373: Results dictionary properly updated with new metrics.The results dictionary correctly includes the new averagePower, averageFanSpeed, and errorReason fields.
444-446: Top performers output properly includes fan speed.The conditional inclusion of averageFanSpeed in the top performers output is correctly implemented.
458-460: Most efficient results output properly includes fan speed.The conditional inclusion of averageFanSpeed in the most efficient results output is correctly implemented.
484-486: Summary output properly displays average power and fan speed.The terminal output correctly displays the new metrics with proper formatting and conditional display for fan speed.
498-500: Efficient results summary properly displays new metrics.The terminal output for most efficient results correctly displays average power and fan speed with proper conditional formatting.
…solve API mapping and initial state issues
This commit introduces significant enhancements to the Bitaxe Hashrate Benchmark script, focusing on collecting more comprehensive performance data and resolving key issues related to API data retrieval and script robustness.
**Key Features Added:**
* **Average Power Consumption (Watts):** The benchmark now calculates and includes the average power consumption for each voltage/frequency combination in the final JSON results and the terminal summary. This provides a direct metric for power efficiency analysis.
* **Average Fan Speed (RPM/Percentage):** Fan speed data is now fetched and averaged for each tested configuration, then included in the final JSON results and terminal summary. This allows for better assessment of cooling performance and noise levels alongside hashing performance.
* **Real-time Power and Fan Speed Display:** The live terminal output during benchmarking now includes the current power consumption and fan speed for each individual sample, enabling immediate monitoring of these critical metrics.
**Major Fixes and Improvements:**
* **Resolved `asic_count` API Mapping:** The script previously defaulted `asic_count` to 0 because the Bitaxe's `/api/system/info` endpoint does not expose this key. `asic_count` is now hardcoded to 1 in the configuration, ensuring the "Expected Hashrate" calculation is accurate for Bitaxe Gamma 601 (BM1370) models.
* **Corrected Fan Speed API Key:** The script's attempt to fetch "fanSpeed" from the API has been corrected to use "fanspeed" (for percentage) or "fanrpm" (for RPM), based on direct API response analysis. This ensures fan speed data is correctly retrieved.
* **Improved `benchmark_iteration` Return Consistency:** The `benchmark_iteration` function's return signature has been standardized to consistently return 8 values (including `average_power`, `average_fan_speed`, and `error_reason`), ensuring proper unpacking in the main loop. All early exit paths within this function now return a consistent tuple length.
* **Enhanced Script Robustness (Addressing NameError and `results` contradiction):**
* Variables like `error_reason`, `avg_power`, `avg_fan_speed`, etc., are now correctly managed and passed throughout the main execution flow.
* Although the previous `NameError` was challenging to pinpoint without a full traceback, the current implementation addresses potential scope ambiguities and ensures the `results` list is correctly populated and handled even during unexpected exits. This should prevent the "results list is empty" contradiction seen previously.
* **Faster Testing Configuration (Optional):** The default `benchmark_time` was adjusted to 120 seconds (2 minutes) and `frequency_increment` adjusted to 25 MHz for quicker test runs during development. (These can be reverted to original for more exhaustive testing).
These changes collectively make the benchmark tool more accurate, informative, and resilient to common API data inconsistencies, providing a richer dataset for Bitaxe optimization.#
This commit introduces a new command-line option to directly set the core voltage and frequency on the Bitaxe miner, bypassing the full benchmarking process. **Motivation:** Previously, applying specific desired settings required either temporarily modifying the script or running a full benchmark starting at those settings. This new functionality provides a quick, convenient, and direct way to configure the miner to a known good state or a specific operating point without needing to run an entire benchmark cycle. This is particularly useful for fine-tuning after initial benchmarks, or for quickly re-applying optimal settings. **Implementation:** A new command-line flag, -sor--set-values, has been added using argparse. When this flag is detected, the script will: 1. Parse the provided core voltage (-v) and frequency (-f) as the target settings. 2. Call the existing set_system_settings() function to apply these parameters to the Bitaxe. 3. Print confirmation messages. 4. Exit immediately using sys.exit(0), preventing the benchmark loop from initiating. **Usage:** To use this new mode, run the script with the --set-values flag, specifying your desired voltage and frequency: python bitaxe_hasrate_benchmark.py <bitaxe_ip> --set-values -v <desired_voltage_mV> -f <desired_frequency_MHz> Example: python bitaxe_hasrate_benchmark.py 192.168.1.136 --set-values -v 1150 -f 780 This enhancement streamlines the process of applying specific configurations to the Bitaxe miner.#
Enhanced the script's command-line help message to be more user-friendly and informative. Key improvements include: * **Clearer Descriptions:** Detailed explanations for each argument, including their dual purpose for benchmarking and setting values. * **Usage Examples:** Added explicit command examples for both benchmark and set-only modes in the help message's epilog. * **Improved Formatting:** Utilized a custom formatter to preserve multi-line text, add default values, and incorporate color for better readability.#
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (2)
README.md (2)
1-5: Avoid bold text inside Markdown heading markersUsing
# **…**(and## **…**) breaks the standard Markdown outline and makes rendered text look noisy. Prefer plain headings:-# **Bitaxe Hashrate Benchmark** +# Bitaxe Hashrate Benchmark ... -## **Features** +# ## FeaturesThe same applies to all subsequent headings that embed
**…**.Also applies to: 17-17
175-175: Replace Google search link with local LICENSE referenceLinking to a generic Google search feels unpolished and may break. Point directly to the LICENSE file in the repo:
-This project is licensed under the GNU General Public License v3.0 - see the [LICENSE](https://www.google.com/search?q=LICENSE) file for details. +This project is licensed under the GNU General Public License v3.0 – see the [LICENSE](LICENSE) file for details.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
README.md(1 hunks)
🧰 Additional context used
🪛 LanguageTool
README.md
[grammar] ~1-~1: Use proper spacing conventions.
Context: # Bitaxe Hashrate Benchmark A Python-based benchmarking tool for opt...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~3-~3: Use proper spacing conventions.
Context: ...rate, temperature, and power efficiency. ## Features * Automated benchmarking of ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~5-~5: Use proper spacing conventions.
Context: ...re, and power efficiency. ## Features * Automated benchmarking of different volt...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~15-~15: Use proper spacing conventions.
Context: ...n * Docker support for easy deployment ## Prerequisites * Python 3.11 or higher...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~17-~17: Use proper spacing conventions.
Context: ... for easy deployment ## Prerequisites * Python 3.11 or higher * Access to a Bi...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~22-~22: Use proper spacing conventions.
Context: ...t (optional, for cloning the repository) ## Installation ### **Standard Installat...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~24-~24: Use proper spacing conventions.
Context: ...oning the repository) ## Installation ### Standard Installation 1. Clone the re...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~26-~26: Use proper spacing conventions.
Context: ...tallation** ### Standard Installation 1. Clone the repository: git clone htt...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~30-~30: Use proper spacing conventions.
Context: ...rk.git cd Bitaxe-Hashrate-Benchmark 2. Create and activate a virtual environmen...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~37-~37: Use proper spacing conventions.
Context: ... Linux/Mac source venv/bin/activate 3. Install dependencies: pip install ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~40-~40: There might be a mistake here.
Context: ... Install dependencies: pip install -r requirements.txt ### **Docker Installa...
(QB_NEW_EN_OTHER)
[grammar] ~40-~40: Use proper spacing conventions.
Context: ...s: pip install -r requirements.txt ### Docker Installation 1. Build the Dock...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~42-~42: Use proper spacing conventions.
Context: ...uirements.txt ### Docker Installation 1. Build the Docker image: docker buil...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~45-~45: Use proper spacing conventions.
Context: ... docker build -t bitaxe-benchmark . ## Usage ### **Standard Usage (Run Full ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~47-~47: Use proper spacing conventions.
Context: ...build -t bitaxe-benchmark . ## Usage ### Standard Usage (Run Full Benchmark) R...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~49-~49: Use proper spacing conventions.
Context: ...## Standard Usage (Run Full Benchmark) Run the benchmark tool by providing your...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~52-~52: Use proper spacing conventions.
Context: ...al_voltage> -f <initial_frequency> Arguments: * <bitaxe_ip>: **Requir...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~54-~54: Use proper spacing conventions.
Context: ...-f <initial_frequency> Arguments: * <bitaxe_ip>: Required. IP address...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~56-~56: Use proper spacing conventions.
Context: ... your Bitaxe miner (e.g., 192.168.2.26). * -v, --voltage: Optional. Initial v...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~57-~57: Use proper spacing conventions.
Context: ...ltage in mV for testing (default: 1150). * -f, --frequency: Optional. Initial...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~58-~58: Use proper spacing conventions.
Context: ...uency in MHz for testing (default: 500). Example: python bitaxe_hasrate_ben...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~61-~61: Use proper spacing conventions.
Context: ...chmark.py 192.168.1.136 -v 1150 -f 500 ### **Apply Specific Settings (Without Benchma...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~63-~63: Use proper spacing conventions.
Context: ...Specific Settings (Without Benchmarking)** To quickly apply specific voltage and fr...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~66-~66: Use proper spacing conventions.
Context: ...ge_mv> -f <desired_frequency_mhz> Arguments: * <bitaxe_ip>: **Requir...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~68-~68: Use proper spacing conventions.
Context: ...<desired_frequency_mhz> Arguments: * <bitaxe_ip>: Required. IP address...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~70-~70: Use proper spacing conventions.
Context: ...ired.** IP address of your Bitaxe miner. * -s, --set-values: Flag. Activates ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~71-~71: Use proper spacing conventions.
Context: ...s this mode to only set values and exit. * -v, --voltage: Required. The exact...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~72-~72: Use proper spacing conventions.
Context: ...red.** The exact voltage in mV to apply. * -f, --frequency: Required. The exa...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~73-~73: Use proper spacing conventions.
Context: ....** The exact frequency in MHz to apply. Example: python bitaxe_hasrate_ben...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~76-~76: Use proper spacing conventions.
Context: ...168.1.136 --set-values -v 1150 -f 780 ### Docker Usage (Optional) Run the conta...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~78-~78: Use proper spacing conventions.
Context: ...0 -f 780 ### Docker Usage (Optional) Run the container with your Bitaxe's IP ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~80-~80: There might be a mistake here.
Context: ...dress (add --set-values for that mode): docker run --rm bitaxe-benchmark <bita...
(QB_NEW_EN_OTHER)
[grammar] ~81-~81: Use proper spacing conventions.
Context: ...axe-benchmark <bitaxe_ip> [options] Example (Full Benchmark): docker run ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~84-~84: Use proper spacing conventions.
Context: ...-benchmark 192.168.2.26 -v 1200 -f 550 Example (Set Settings Only): docker ru...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~87-~87: Use proper spacing conventions.
Context: ....168.2.26 --set-values -v 1150 -f 780 ## Configuration The script includes sev...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~89-~89: Use proper spacing conventions.
Context: ...ues -v 1150 -f 780 ## Configuration The script includes several configurable...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~91-~91: Use proper spacing conventions.
Context: ... the bitaxe_hasrate_benchmark.py file: * Maximum chip temperature: 66°C * Maxim...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~95-~95: Combining words like “every day” changes the meaning.
Context: ...ture: 86°C * Maximum allowed voltage: 1400mV * Minimum allowed voltage: 1000mV *...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~96-~96: Combining words like “every day” changes the meaning.
Context: ...ge: 1400mV * Minimum allowed voltage: 1000mV * Maximum allowed frequency: 1200MHz ...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~97-~97: Combining words like “every day” changes the meaning.
Context: ...: 1000mV * Maximum allowed frequency: 1200MHz * Maximum power consumption: 30W * ...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~98-~98: Combining words like “every day” changes the meaning.
Context: ... 1200MHz * Maximum power consumption: 30W * Minimum allowed frequency: 400MHz ...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~99-~99: Combining words like “every day” changes the meaning.
Context: ...ion: 30W * Minimum allowed frequency: 400MHz * Minimum input voltage: 4800mV * M...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~100-~100: Combining words like “every day” changes the meaning.
Context: ...ency: 400MHz * Minimum input voltage: 4800mV * Maximum input voltage: 5500mV * B...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~101-~101: Combining words like “every day” changes the meaning.
Context: ...tage: 4800mV * Maximum input voltage: 5500mV * Benchmark duration: 600 seconds (10...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~105-~105: Combining words like “every day” changes the meaning.
Context: ...data processing) * Voltage increment: 15mV * Frequency increment: 20MHz * **AS...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~106-~106: Combining words like “every day” changes the meaning.
Context: ...ncrement: 15mV * Frequency increment: 20MHz * ASIC Configuration: asic_count...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~107-~107: Use proper spacing conventions.
Context: ..._core_count is fetched from the Bitaxe. ## Output The benchmark results are save...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~109-~109: Use proper spacing conventions.
Context: ...is fetched from the Bitaxe. ## Output The benchmark results are saved to bitax...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~111-~111: Use proper spacing conventions.
Context: ...sults_<ip_address>.json, containing: * Complete test results for all combinatio...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~125-~125: Use proper spacing conventions.
Context: ...reason (if any) for a specific iteration ## Safety Features * Automatic temperatu...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~127-~127: Use proper spacing conventions.
Context: ...specific iteration ## Safety Features * Automatic temperature monitoring with sa...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~131-~131: Combining words like “every day” changes the meaning.
Context: ...tage monitoring with minimum threshold (4800mV) and maximum threshold (5500mV) * Pow...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~131-~131: Combining words like “every day” changes the meaning.
Context: ...reshold (4800mV) and maximum threshold (5500mV) * Power consumption monitoring with ...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~132-~132: Combining words like “every day” changes the meaning.
Context: ...sumption monitoring with safety cutoff (30W) * Temperature validation (must be ab...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~139-~139: Use proper spacing conventions.
Context: ...* Outlier removal from benchmark results ## Benchmarking Process The tool follows...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~141-~141: Use proper spacing conventions.
Context: ...hmark results ## Benchmarking Process The tool follows this process: 1. Start...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~143-~143: Use proper spacing conventions.
Context: ...rocess** The tool follows this process: 1. Starts with user-specified or default vo...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~145-~145: There might be a mistake here.
Context: .... Starts with user-specified or default voltage/frequency 2. Tests each combination for 10 minu...
(QB_NEW_EN_OTHER)
[grammar] ~146-~146: There might be a mistake here.
Context: ...ency 2. Tests each combination for 10 minutes 3. Validates hashrate is within 8% of...
(QB_NEW_EN_OTHER)
[grammar] ~147-~147: There might be a mistake here.
Context: ...es hashrate is within 8% of theoretical maximum 4. Incrementally adjusts settings: ...
(QB_NEW_EN_OTHER)
[grammar] ~149-~149: There might be a mistake here.
Context: ...settings: * Increases frequency if stable * Increases voltage if unstable ...
(QB_NEW_EN_OTHER)
[grammar] ~150-~150: There might be a mistake here.
Context: ...y if stable * Increases voltage if unstable * Stops at thermal or stability li...
(QB_NEW_EN_OTHER)
[grammar] ~151-~151: There might be a mistake here.
Context: ...le * Stops at thermal or stability limits 5. Records and ranks all successful c...
(QB_NEW_EN_OTHER)
[grammar] ~152-~152: There might be a mistake here.
Context: ...s 5. Records and ranks all successful configurations 6. Automatically applies the best per...
(QB_NEW_EN_OTHER)
[grammar] ~153-~153: There might be a mistake here.
Context: ...ally applies the best performing stable settings 7. Restarts system after each test fo...
(QB_NEW_EN_OTHER)
[grammar] ~154-~154: There might be a mistake here.
Context: ... 7. Restarts system after each test for stability 8. Allows 90-second stabilization per...
(QB_NEW_EN_OTHER)
[grammar] ~155-~155: Place a period at the end of declarative sentences.
Context: ...econd stabilization period between tests ## Data Processing The tool implements s...
(QB_NEW_EN_OTHER_ERROR_IDS_000178)
[grammar] ~157-~157: Use proper spacing conventions.
Context: ...riod between tests ## Data Processing The tool implements several data process...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~159-~159: Use proper spacing conventions.
Context: ...g techniques to ensure accurate results: * Removes 3 highest and 3 lowest hashrate ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~161-~161: There might be a mistake here.
Context: ...3 lowest hashrate readings to eliminate outliers * Excludes first 6 temperature readin...
(QB_NEW_EN_OTHER)
[grammar] ~162-~162: There might be a mistake here.
Context: ...st 6 temperature readings during warmup period * Validates hashrate is within 6% of ...
(QB_NEW_EN_OTHER)
[grammar] ~163-~163: There might be a mistake here.
Context: ...es hashrate is within 6% of theoretical maximum * Averages power consumption across e...
(QB_NEW_EN_OTHER)
[grammar] ~164-~164: There might be a mistake here.
Context: ...es power consumption across entire test period * Monitors VR temperature when availa...
(QB_NEW_EN_OTHER)
[grammar] ~165-~165: There might be a mistake here.
Context: ...period * Monitors VR temperature when available * Calculates efficiency in Joules per...
(QB_NEW_EN_OTHER)
[grammar] ~166-~166: There might be a mistake here.
Context: ...lates efficiency in Joules per Terahash (J/TH) * **Averages fan speed across entire ...
(QB_NEW_EN_OTHER)
[grammar] ~167-~167: Place a period at the end of declarative sentences.
Context: ...ages fan speed across entire test period** ## Contributing Contributions are welcom...
(QB_NEW_EN_OTHER_ERROR_IDS_000178)
[grammar] ~169-~169: Use proper spacing conventions.
Context: ... entire test period** ## Contributing Contributions are welcome! Please feel ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[style] ~171-~171: Consider using a less common alternative to make your writing sound more unique and professional.
Context: ...ributing** Contributions are welcome! Please feel free to submit a Pull Request. ## License ...
(FEEL_FREE_TO_STYLE_ME)
[grammar] ~171-~171: Use proper spacing conventions.
Context: ...ease feel free to submit a Pull Request. ## License This project is licensed unde...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~173-~173: Use proper spacing conventions.
Context: ... to submit a Pull Request. ## License This project is licensed under the GNU G...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[typographical] ~175-~175: To join two clauses or set off examples, consider using an em dash.
Context: ...nder the GNU General Public License v3.0 - see the [LICENSE](https://www.google.com...
(QB_NEW_EN_DASH_RULE_EM)
[grammar] ~175-~175: Use proper spacing conventions.
Context: ....com/search?q=LICENSE) file for details. ## Disclaimer Please use this tool respo...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~177-~177: Use proper spacing conventions.
Context: ...ENSE) file for details. ## Disclaimer Please use this tool responsibly. Overcl...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
🪛 markdownlint-cli2 (0.17.2)
README.md
29-29: Bare URL used
(MD034, no-bare-urls)
🔇 Additional comments (2)
README.md (2)
70-73: CLI flag description mismatched with short optionYou describe the flag as
-s, --set-valuesbut the bullet list omits-sand only mentions--set-values. Either advertise both or drop the short form to avoid confusion.-* -s, --set-values: **Flag.** Activates this mode to only set values and exit. +* -s, --set-values: **Flag.** Activates this mode to only set values and exit.(If
-swas intentionally removed from the argparse config, delete it here as well.)
121-123: Great job documenting new metricsThe README now explicitly lists average power and fan speed, perfectly mirroring the new JSON schema. 👍
There was a problem hiding this comment.
Actionable comments posted: 0
♻️ Duplicate comments (1)
README.md (1)
61-63: Fix repeated typo “bitaxe_hasrate_benchmark.py”.All usage examples and references should use the actual script name
bitaxe_hashrate_benchmark.py(with the extra “h”).
Copy-pasting the current examples will fail.Also applies to: 72-74, 79-81, 91-93, 113-115
🧹 Nitpick comments (1)
README.md (1)
50-53: Add missing build-context dot to the Docker command.Without the trailing “
.” Docker has no context and the command errors out.-docker build \-t bitaxe-benchmark +docker build \-t bitaxe-benchmark .
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
README.md(1 hunks)
🧰 Additional context used
🪛 LanguageTool
README.md
[grammar] ~1-~1: Use proper spacing conventions.
Context: # Bitaxe Hashrate Benchmark A Python-based benchmarking tool for opt...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~3-~3: Use proper spacing conventions.
Context: ...rate, temperature, and power efficiency. ## Features * Automated benchmarking of ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~5-~5: Use proper spacing conventions.
Context: ...re, and power efficiency. ## Features * Automated benchmarking of different volt...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~15-~15: Use proper spacing conventions.
Context: ...n * Docker support for easy deployment ## Prerequisites * Python 3.11 or higher...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~17-~17: Use proper spacing conventions.
Context: ... for easy deployment ## Prerequisites * Python 3.11 or higher * Access to a Bi...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~22-~22: Use proper spacing conventions.
Context: ...t (optional, for cloning the repository) ## Installation ### **Standard Installat...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~24-~24: Use proper spacing conventions.
Context: ...oning the repository) ## Installation ### Standard Installation 1. Clone the re...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~26-~26: Use proper spacing conventions.
Context: ...tallation** ### Standard Installation 1. Clone the repository: ```bash gi...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~28-~28: Use proper spacing conventions.
Context: ...Installation** 1. Clone the repository: bash git clone https://github.com/mrv777/Bitaxe-Hashrate-Benchmark.git cd Bitaxe-Hashrate-Benchmark 2. Create and activate a virtual environmen...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~34-~34: Use proper spacing conventions.
Context: ...eate and activate a virtual environment: bash python \-m venv venv \# On Windows venv\\Scripts\\activate \# On Linux/Mac source venv/bin/activate 3. Install dependencies: ```bash pi...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~43-~43: Use proper spacing conventions.
Context: ...ctivate 3. Install dependencies: bash pip install -r requirements.txt ``` ### Docker Installation 1. Build the Dock...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~48-~48: Use proper spacing conventions.
Context: ...ts.txt ### **Docker Installation** 1. Build the Docker image: bash ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~50-~50: Use proper spacing conventions.
Context: ...stallation** 1. Build the Docker image: bash docker build \-t bitaxe-benchmark ## Usage ### **Standard Usage (Run Full ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~55-~55: Use proper spacing conventions.
Context: ... -t bitaxe-benchmark ``` ## Usage ### Standard Usage (Run Full Benchmark) R...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~57-~57: Use proper spacing conventions.
Context: ...## Standard Usage (Run Full Benchmark) Run the benchmark tool by providing your...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~59-~59: Use proper spacing conventions.
Context: ...itaxe's IP address and initial settings: bash python bitaxe\_hasrate\_benchmark.py \<bitaxe\_ip\> \-v \<initial\_voltage\> \-f \<initial\_frequency\> Arguments: * <bitaxe_ip>: **Requir...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~64-~64: Use proper spacing conventions.
Context: ...<initial_frequency> ``` Arguments: * <bitaxe_ip>: Required. IP address...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~66-~66: Use proper spacing conventions.
Context: ... your Bitaxe miner (e.g., 192.168.2.26). * \-v, \--voltage: Optional. Initial voltage in mV for...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~67-~67: Use proper spacing conventions.
Context: ...ltage in mV for testing (default: 1150). * \-f, \--frequency: Optional. Initial frequency in MHz ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~68-~68: Use proper spacing conventions.
Context: ...uency in MHz for testing (default: 500). Example: ```bash python bitaxe_hasr...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~70-~70: Use proper spacing conventions.
Context: ... for testing (default: 500). Example: bash python bitaxe\_hasrate\_benchmark.py 192.168.1.136 \-v 1150 \-f 500 ### **Apply Specific Settings (Without Benchma...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~75-~75: Use proper spacing conventions.
Context: ...Specific Settings (Without Benchmarking)** To quickly apply specific voltage and fr...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~77-~77: Use proper spacing conventions.
Context: ...taxe without running the full benchmark: bash python bitaxe\_hasrate\_benchmark.py \<bitaxe\_ip\> \--set-values \-v \<desired\_voltage\_mv\> \-f \<desired\_frequency\_mhz\> Arguments: * <bitaxe_ip>: **Requir...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~82-~82: Use proper spacing conventions.
Context: ...ired_frequency_mhz> ``` Arguments: * <bitaxe_ip>: Required. IP address...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~84-~84: Use proper spacing conventions.
Context: ...ired.** IP address of your Bitaxe miner. * \-s, \--set-values: Flag. Activates this mode to only s...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~85-~85: Use proper spacing conventions.
Context: ...s this mode to only set values and exit. * \-v, \--voltage: Required. The exact voltage in mV t...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~86-~86: Use proper spacing conventions.
Context: ...red.** The exact voltage in mV to apply. * \-f, \--frequency: Required. The exact frequency in MH...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~87-~87: Use proper spacing conventions.
Context: ....** The exact frequency in MHz to apply. Example: ```bash python bitaxe_hasr...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~89-~89: Use proper spacing conventions.
Context: ...t frequency in MHz to apply. Example: bash python bitaxe\_hasrate\_benchmark.py 192.168.1.136 \--set-values \-v 1150 \-f 780 ### Docker Usage (Optional) Run the conta...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~94-~94: Use proper spacing conventions.
Context: ...f 780 ``` ### Docker Usage (Optional) Run the container with your Bitaxe's IP ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~96-~96: Use proper spacing conventions.
Context: ...dress (add --set-values for that mode): bash docker run \--rm bitaxe-benchmark \<bitaxe\_ip\> \[options\] Example (Full Benchmark): ```bash dock...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~101-~101: Use proper spacing conventions.
Context: ...options] Example (Full Benchmark): bash docker run --rm bitaxe-benchmark 192.168.2.26 -v 1200 -f 550 Example (Set Settings Only): bash d...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~106-~106: Use proper spacing conventions.
Context: ...-f 550 Example (Set Settings Only): bash docker run --rm bitaxe-benchmark 192.168.2.26 --set-values -v 1150 -f 780 ``` ## Configuration The script includes sev...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~111-~111: Use proper spacing conventions.
Context: ...-v 1150 -f 780 ``` ## Configuration The script includes several configurable...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~113-~113: Use proper spacing conventions.
Context: ... the bitaxe_hasrate_benchmark.py file: * Maximum chip temperature: 66°C * Maxim...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~117-~117: Combining words like “every day” changes the meaning.
Context: ...ture: 86°C * Maximum allowed voltage: 1400mV * Minimum allowed voltage: 1000mV *...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~118-~118: Combining words like “every day” changes the meaning.
Context: ...ge: 1400mV * Minimum allowed voltage: 1000mV * Maximum allowed frequency: 1200MHz ...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~119-~119: Combining words like “every day” changes the meaning.
Context: ...: 1000mV * Maximum allowed frequency: 1200MHz * Maximum power consumption: 30W * ...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~120-~120: Combining words like “every day” changes the meaning.
Context: ... 1200MHz * Maximum power consumption: 30W * Minimum allowed frequency: 400MHz ...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~121-~121: Combining words like “every day” changes the meaning.
Context: ...ion: 30W * Minimum allowed frequency: 400MHz * Minimum input voltage: 4800mV * M...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~122-~122: Combining words like “every day” changes the meaning.
Context: ...ency: 400MHz * Minimum input voltage: 4800mV * Maximum input voltage: 5500mV * B...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~123-~123: Combining words like “every day” changes the meaning.
Context: ...tage: 4800mV * Maximum input voltage: 5500mV * Benchmark duration: 600 seconds (10...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~127-~127: Combining words like “every day” changes the meaning.
Context: ...data processing) * Voltage increment: 15mV * Frequency increment: 20MHz * **AS...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~128-~128: Combining words like “every day” changes the meaning.
Context: ...ncrement: 15mV * Frequency increment: 20MHz * ASIC Configuration: asic_count...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~129-~129: Use proper spacing conventions.
Context: ..._core_count is fetched from the Bitaxe. ## Output The benchmark results are save...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~131-~131: Use proper spacing conventions.
Context: ...is fetched from the Bitaxe. ## Output The benchmark results are saved to bitax...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~133-~133: Use proper spacing conventions.
Context: ...sults_<ip_address>.json, containing: * Complete test results for all combinatio...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~147-~147: Use proper spacing conventions.
Context: ...reason (if any) for a specific iteration ## Safety Features * Automatic temperatu...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~149-~149: Use proper spacing conventions.
Context: ...specific iteration ## Safety Features * Automatic temperature monitoring with sa...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~153-~153: Combining words like “every day” changes the meaning.
Context: ...tage monitoring with minimum threshold (4800mV) and maximum threshold (5500mV) * Pow...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~153-~153: Combining words like “every day” changes the meaning.
Context: ...reshold (4800mV) and maximum threshold (5500mV) * Power consumption monitoring with ...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~154-~154: Combining words like “every day” changes the meaning.
Context: ...sumption monitoring with safety cutoff (30W) * Temperature validation (must be ab...
(QB_NEW_EN_OTHER_ERROR_IDS_000001)
[grammar] ~161-~161: Use proper spacing conventions.
Context: ...* Outlier removal from benchmark results ## Benchmarking Process The tool follows...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~163-~163: Use proper spacing conventions.
Context: ...hmark results ## Benchmarking Process The tool follows this process: 1. Start...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~165-~165: Use proper spacing conventions.
Context: ...rocess** The tool follows this process: 1. Starts with user-specified or default vo...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~167-~167: There might be a mistake here.
Context: .... Starts with user-specified or default voltage/frequency 2. Tests each combination for 10 minu...
(QB_NEW_EN_OTHER)
[grammar] ~168-~168: There might be a mistake here.
Context: ...ency 2. Tests each combination for 10 minutes 3. Validates hashrate is within 8% of...
(QB_NEW_EN_OTHER)
[grammar] ~169-~169: There might be a mistake here.
Context: ...es hashrate is within 8% of theoretical maximum 4. Incrementally adjusts settings: ...
(QB_NEW_EN_OTHER)
[grammar] ~171-~171: There might be a mistake here.
Context: ...settings: * Increases frequency if stable * Increases voltage if unstable ...
(QB_NEW_EN_OTHER)
[grammar] ~172-~172: There might be a mistake here.
Context: ...y if stable * Increases voltage if unstable * Stops at thermal or stability li...
(QB_NEW_EN_OTHER)
[grammar] ~173-~173: There might be a mistake here.
Context: ...le * Stops at thermal or stability limits 5. Records and ranks all successful c...
(QB_NEW_EN_OTHER)
[grammar] ~174-~174: There might be a mistake here.
Context: ...s 5. Records and ranks all successful configurations 6. Automatically applies the best per...
(QB_NEW_EN_OTHER)
[grammar] ~175-~175: There might be a mistake here.
Context: ...ally applies the best performing stable settings 7. Restarts system after each test fo...
(QB_NEW_EN_OTHER)
[grammar] ~176-~176: There might be a mistake here.
Context: ... 7. Restarts system after each test for stability 8. Allows 90-second stabilization per...
(QB_NEW_EN_OTHER)
[grammar] ~177-~177: Place a period at the end of declarative sentences.
Context: ...econd stabilization period between tests ## Data Processing The tool implements s...
(QB_NEW_EN_OTHER_ERROR_IDS_000178)
[grammar] ~179-~179: Use proper spacing conventions.
Context: ...riod between tests ## Data Processing The tool implements several data process...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~181-~181: Use proper spacing conventions.
Context: ...g techniques to ensure accurate results: * Removes 3 highest and 3 lowest hashrate ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~183-~183: There might be a mistake here.
Context: ...3 lowest hashrate readings to eliminate outliers * Excludes first 6 temperature readin...
(QB_NEW_EN_OTHER)
[grammar] ~184-~184: There might be a mistake here.
Context: ...st 6 temperature readings during warmup period * Validates hashrate is within 6% of ...
(QB_NEW_EN_OTHER)
[grammar] ~185-~185: There might be a mistake here.
Context: ...es hashrate is within 6% of theoretical maximum * Averages power consumption across e...
(QB_NEW_EN_OTHER)
[grammar] ~186-~186: There might be a mistake here.
Context: ...es power consumption across entire test period * Monitors VR temperature when availa...
(QB_NEW_EN_OTHER)
[grammar] ~187-~187: There might be a mistake here.
Context: ...period * Monitors VR temperature when available * Calculates efficiency in Joules per...
(QB_NEW_EN_OTHER)
[grammar] ~188-~188: There might be a mistake here.
Context: ...lates efficiency in Joules per Terahash (J/TH) * **Averages fan speed across entire ...
(QB_NEW_EN_OTHER)
[grammar] ~189-~189: Place a period at the end of declarative sentences.
Context: ...ages fan speed across entire test period** ## Contributing Contributions are welcom...
(QB_NEW_EN_OTHER_ERROR_IDS_000178)
[grammar] ~191-~191: Use proper spacing conventions.
Context: ... entire test period** ## Contributing Contributions are welcome! Please feel ...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[style] ~193-~193: Consider using a less common alternative to make your writing sound more unique and professional.
Context: ...ributing** Contributions are welcome! Please feel free to submit a Pull Request. ## License ...
(FEEL_FREE_TO_STYLE_ME)
[grammar] ~193-~193: Use proper spacing conventions.
Context: ...ease feel free to submit a Pull Request. ## License This project is licensed unde...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~195-~195: Use proper spacing conventions.
Context: ... to submit a Pull Request. ## License This project is licensed under the GNU G...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[typographical] ~197-~197: To join two clauses or set off examples, consider using an em dash.
Context: ...nder the GNU General Public License v3.0 - see the [LICENSE](https://www.google.com...
(QB_NEW_EN_DASH_RULE_EM)
[grammar] ~197-~197: Use proper spacing conventions.
Context: ....com/search?q=LICENSE) file for details. ## Disclaimer Please use this tool respo...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
[grammar] ~199-~199: Use proper spacing conventions.
Context: ...ENSE) file for details. ## Disclaimer Please use this tool responsibly. Overcl...
(QB_NEW_EN_OTHER_ERROR_IDS_000007)
Resolved rendering issues in argument lists by correctly applying single backticks for inline code, ensuring proper display on GitHub.
There was a problem hiding this comment.
Actionable comments posted: 2
🧹 Nitpick comments (1)
README.md (1)
193-193: Replace external LICENSE search link with repo file link.Linking to Google is brittle and looks unprofessional.
-This project is licensed under the GNU General Public License v3.0 - see the [LICENSE](https://www.google.com/search?q=LICENSE) file for details. +This project is licensed under the GNU General Public License v3.0 — see the [LICENSE](LICENSE) file for details.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
README.md(1 hunks)
🧰 Additional context used
🪛 LanguageTool
README.md
[style] ~189-~189: Consider using a less common alternative to make your writing sound more unique and professional.
Context: ...tributing** Contributions are welcome! Please feel free to submit a Pull Request. ## License ...
(FEEL_FREE_TO_STYLE_ME)
🪛 markdownlint-cli2 (0.17.2)
README.md
46-46: Heading levels should only increment by one level at a time
Expected: h2; Actual: h3
(MD001, heading-increment)
🔇 Additional comments (3)
README.md (3)
1-1: Title looks good.
Hashratetypo from previous revision is fixed.
5-15: Feature list is clear and accurately reflects new functionality.
No issues spotted.
57-69: Script name now correct — verify all remaining occurrences.
bitaxe_hashrate_benchmark.pyis spelled correctly here.
Run a quick search to ensure straybitaxe_hasrate_benchmark.pystrings were removed elsewhere.
Resolved rendering issues in argument lists by correctly applying single backticks for inline code, ensuring proper display on GitHub.
There was a problem hiding this comment.
Actionable comments posted: 0
♻️ Duplicate comments (2)
README.md (2)
37-41: Fix Windows venv activation path (regression from earlier review).The command still lacks path separators and will fail on Windows:
-venvScriptsactivate +venv\Scripts\activateThis was flagged previously but remains unresolved.
50-51: Add build-context dot to Docker build command.Building without
.yields “no context” errors:-docker build -t bitaxe-benchmark +docker build -t bitaxe-benchmark .
🧹 Nitpick comments (2)
README.md (2)
82-85: Argument flag-snot implemented in examples.The bullet lists
-s, --set-values, but examples and the script (per PR description) only show--set-values. Either document the short flag or drop it to avoid confusion.
195-195: Point LICENSE link to repository file, not Google search.Replace the external search URL with a relative path:
-[LICENSE](https://www.google.com/search?q=LICENSE) +[LICENSE](LICENSE)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
README.md(1 hunks)
🧰 Additional context used
🪛 LanguageTool
README.md
[style] ~191-~191: Consider using a less common alternative to make your writing sound more unique and professional.
Context: ...tributing** Contributions are welcome! Please feel free to submit a Pull Request. ## License ...
(FEEL_FREE_TO_STYLE_ME)
🔇 Additional comments (1)
README.md (1)
19-22: Re-evaluate Python version requirement.Requiring “Python 3.11 or higher” is needlessly strict unless the script uses 3.11-specific features (e.g.,
tomllib,typing.Self). Confirm actual minimum version and adjust to widen adoption.
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (1)
README.md (1)
1-1: Remove redundant bold markup inside the top-level heading
# Bitaxe Hashrate Benchmarkrenders as a level-1 heading already; the additional**markers add no value and slightly hurt Markdown readability.-# **Bitaxe Hashrate Benchmark** +# Bitaxe Hashrate Benchmark
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
README.md(1 hunks)
🧰 Additional context used
🪛 LanguageTool
README.md
[style] ~191-~191: Consider using a less common alternative to make your writing sound more unique and professional.
Context: ...tributing** Contributions are welcome! Please feel free to submit a Pull Request. ## License ...
(FEEL_FREE_TO_STYLE_ME)
🔇 Additional comments (2)
README.md (2)
50-51: Docker command now correct – LGTMThe addition of the trailing dot fixes the missing build context issue.
No further action required.
19-21: Verify stated Python version requirementThe README specifies “Python 3.11 or higher”. If the project does not rely on 3.11-specific features (e.g.,
tomllib,typing.Self, pattern-matching improvements), lowering this to 3.9+ broadens usability—particularly for common LTS distributions that still ship 3.10.Please confirm actual minimum compatibility and adjust if appropriate.
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (2)
README.md (2)
36-40: Windows venv activation command is still off by one token
venv\Scripts\activateworks in PowerShell only if you append.bat(cmd) or.ps1(PowerShell).
Explicitly calling the batch file is the least surprising option for newcomers.- # On Windows - venv\Scripts\activate + # On Windows (cmd) + venv\Scripts\activate.bat
141-143: Clarify fan-speed unitsThe fan speed bullet mixes “Percentage or RPM”. Spell out the exact format so downstream tooling can parse it.
- * **Average Fan Speed (Percentage or RPM, if available from API)** + * **Average Fan Speed** (either _percentage [%]_ or _RPM_, depending on API support)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
README.md(1 hunks)
🧰 Additional context used
🪛 LanguageTool
README.md
[style] ~191-~191: Consider using a less common alternative to make your writing sound more unique and professional.
Context: ...tributing** Contributions are welcome! Please feel free to submit a Pull Request. ## License ...
(FEEL_FREE_TO_STYLE_ME)
| 1. Starts with user-specified or default voltage/frequency | ||
| 2. Tests each combination for 10 minutes | ||
| 3. Validates hashrate is within 8% of theoretical maximum | ||
| 4. Incrementally adjusts settings: | ||
| * Increases frequency if stable |
There was a problem hiding this comment.
Inconsistent hashrate-validation thresholds (8 % vs 6 %)
Section “Benchmarking Process” states the tool validates hashrate within 8 % of the theoretical maximum (l. 167), whereas “Data Processing” lists a 6 % threshold (l. 183).
Readers (and future maintainers) cannot tell which rule is authoritative.
-3. Validates hashrate is within 8% of theoretical maximum
+3. Validates hashrate is within 6% of theoretical maximum Alternatively, change the “Data Processing” bullet to 8 %; just make them match.
Also applies to: 181-184
🤖 Prompt for AI Agents
In README.md around lines 165 to 169 and 181 to 184, the hashrate validation
thresholds are inconsistent, showing 8% in the Benchmarking Process section and
6% in the Data Processing section. To fix this, update the threshold in the Data
Processing section to 8% so both sections match and clearly communicate the
authoritative validation rule.
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (2)
README.md (2)
8-8: Mention the actual CLI flag next to the feature descriptionIncluding the flag name improves discoverability for readers skimming the bullets.
-* **Direct setting of specific voltage and frequency from command line** +* **Direct setting of specific voltage and frequency from command line (`--set-values` flag)**
141-143: Clarify fan-speed units“Percentage or RPM” leaves room for guessing. Spell out the exact format returned by the API (e.g., “RPM if numeric value provided, otherwise percent”), or give an example so users can reliably parse the JSON.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
README.md(1 hunks)
🧰 Additional context used
🪛 LanguageTool
README.md
[style] ~191-~191: Consider using a less common alternative to make your writing sound more unique and professional.
Context: ...tributing** Contributions are welcome! Please feel free to submit a Pull Request. ## License ...
(FEEL_FREE_TO_STYLE_ME)
🔇 Additional comments (1)
README.md (1)
165-168: Threshold Verification Complete – 6% Tolerance ConfirmedThe code in
bitaxe_hashrate_benchmark.pyuses:
- Line 368:
hashrate_within_tolerance = (average_hashrate >= expected_hashrate * 0.94)This exactly enforces a 6% lower-bound tolerance, matching the README. No changes required.
Feature: Enhance Benchmark Results with Power Consumption and Fan Speed Data
This pull request introduces enhancements to the
bitaxe_hashrate_benchmark.pyscript to include average power consumption (in Watts) and average fan speed (in RPM or percentage) in the benchmark results.Motivation:
Previously, the benchmark results focused primarily on hashrate, temperature, and J/TH efficiency. While efficiency accounts for power, explicitly logging average power consumption provides a clearer, direct metric of power usage for each tested voltage/frequency combination. Similarly, including fan speed allows for better analysis of cooling performance and its correlation with stability and temperature during different load conditions.
Adding these two factors provides a more comprehensive overview, enabling users to:
Changes Introduced:
benchmark_iterationfunction to collectpowerandfanSpeeddata during each sampling interval.averagePowerandaverageFanSpeedfor each benchmark iteration.resultsdictionary to store these new average values.bitaxe_benchmark_results_<ip_address>.json) to includeaveragePowerandaverageFanSpeedfor all results, top performers, and most efficient configurations.Files Modified:
bitaxe_hashrate_benchmark.pyThis enhancement provides more valuable data for users looking to fine-tune their Bitaxe miners for both performance and operational characteristics.
Summary by CodeRabbit
New Features
Improvements