Changes for release 2.0

.travis.yml

@@ -10,11 +10,15 @@ php:
   - 5.6
   - 7.0
   - 7.1
+  - 7.2
   - nightly
+  - hhvm-3.21
+  - hhvm-nightly
 
 matrix:
   allow_failures:
     - php: nightly
+    - php: hhvm-nightly
 
 before_install:
   - sudo apt-get -qq update
@@ -25,7 +29,7 @@ install:
 
 before_script:
   # Install 'imagick' plugin
-  - printf "\n" | pecl install imagick
+  - bash -c 'if [[ $TRAVIS_PHP_VERSION != hhvm* ]]; then printf "\n" | pecl install imagick; fi'
   # Directory for coverage report
   - mkdir -p build/logs/
 

CONTRIBUTING.md

@@ -42,7 +42,7 @@ This project uses the [PSR-2 standard](https://github.com/php-fig/fig-standards/
 
 ## Testing and CI
 
-The tests are executed on [Travis CI](https://travis-ci.org/mike42/escpos-php) over PHP 5.3, 5.4, 5.5, 5.7, 7, and HHVM. Earlier versions of PHP are not supported.
+The tests are executed on [Travis CI](https://travis-ci.org/mike42/escpos-php) over PHP 5.4, 5.5, 5.6, 7.0, 7.1 and 7.2, plus the latest LTS version of HHVM, 3.21. Older versions of PHP are not supported in current releases.
 
 For development, it's suggested that you load `imagick`, `gd` and `Xdebug` PHP exensions, and install `composer`.
 

CONTRIBUTORS.md

@@ -11,6 +11,7 @@ Main repository: [mike42/escpos-php](https://github.com/mike42/escpos-php) ([onl
 - [matiasgaston](https://github.com/matiasgaston)
 - [Mike Stivala](https://github.com/brndwgn)
 - [Nicholas Long](https://github.com/longsview)
+- [Evandro Araújo](https://github.com/evsar3)
 
 Via fork: [wdoyle/EpsonESCPOS-PHP](https://github.com/wdoyle/EpsonESCPOS-PHP):
 

README.md

@@ -67,30 +67,35 @@ This driver is known to work with the following OS/interface combinations:
 ### Printers
 Many thermal receipt printers support ESC/POS to some degree. This driver has been known to work with:
 
+- 3nStrat POS-08
 - AURES ODP-333
 - AURES ODP-500
+- Bematech-4200-TH
 - Bixolon SRP-350III
+- Black Copper BC-85AC
 - Citizen CBM1000-II
 - Citizen CT-S310II
+- Dapper-Geyi Q583P 
 - Daruma DR800
 - EPOS TEP 220M
-- Epson TM-T88II
-- Epson TM-T88III
-- Epson TM-T88IV
-- Epson TM-T88V
-- Epson TM-T70
-- Epson TM-T82II
+- Epson EU-T332C
+- Epson FX-890 (requires `feedForm()` to release paper).
 - Epson TM-T20
 - Epson TM-T20II
+- Epson TM-T70
 - Epson TM-T70II
 - Epson TM-T81
+- Epson TM-T82II
+- Epson TM-T88II
+- Epson TM-T88III
+- Epson TM-T88IV
+- Epson TM-T88V
 - Epson TM-U220
 - Epson TM-U295 (requires `release()` to release slip).
 - Epson TM-U590 and TM-U590P
-- Epson FX-890 (requires `feedForm()` to release paper).
 - Equal (EQ-IT-001) POS-58
-- Excelvan HOP-E58
 - Excelvan HOP-E200 
+- Excelvan HOP-E58
 - Excelvan HOP-E801
 - Excelvan ZJ-8220
 - Gainscha GP-5890x (Also marketed as EC Line 5890x)
@@ -100,28 +105,34 @@ Many thermal receipt printers support ESC/POS to some degree. This driver has be
 - Metapace T-1
 - Metapace T-25
 - Nexa PX700
+- Nyear NP100
 - Okipos 80 Plus III
 - Orient BTP-R580
 - P-822D
 - P85A-401 (make unknown)
 - Rongta RP326US
 - Rongta RP58-U
+- Senor TP-100
 - SEYPOS PRP-300 (Also marketed as TYSSO PRP-300)
+- Sicar POS-80
 - Silicon SP-201 / RP80USE
+- SPRT SP-POS88V
+- Star BSC10
 - Star TSP100 ECO
 - Star TSP100III FuturePRNT
 - Star TSP-650
 - Star TUP-592
-- SPRT SP-POS88V
+- Venus V248T
 - Xprinter F-900
+- Xprinter XP-58 Series
+- Xprinter XP-80C
+- Xprinter XP-90
 - XPrinter XP-Q20011
 - Xprinter XP-Q800
-- Xprinter XP-80C
-- Venus V248T
 - Zjiang NT-58H
 - Zjiang ZJ-5870
-- Zjiang ZJ-5890T (Marketed as POS 5890T)
 - Zjiang ZJ-5890K
+- Zjiang ZJ-5890T (Marketed as POS 5890T)
 
 If you use any other printer with this code, please [let us know](https://github.com/mike42/escpos-php/issues/new) so that it can be added to the list.
 
@@ -160,7 +171,7 @@ require __DIR__ . '/vendor/mike42/escpos-php/autoload.php';
 To maintain compatibility with as many systems as possible, this driver has few
 hard dependencies:
 
-- PHP 5.3 or above
+- PHP 5.4 or above.
 - `mbstring` extension, since the driver accepts UTF-8 encoding.
 
 It is also suggested that you install either `imagick` or `gd`, so that you can
@@ -531,7 +542,7 @@ This code is MIT licensed, and you are encouraged to contribute any modification
 
 For development, it's suggested that you load `imagick`, `gd` and `Xdebug` PHP exensions, and install `composer`.
 
-The tests are executed on [Travis CI](https://travis-ci.org/mike42/escpos-php) over PHP 5.3, 5.4, 5.5, 5.7, 7, and HHVM. Earlier versions of PHP are not supported.
+The tests are executed on [Travis CI](https://travis-ci.org/mike42/escpos-php) over PHP 5.4, 5.5, 5.6, 7.0, 7.1 and 7.2, plus the latest LTS version of HHVM, 3.21. Older versions of PHP are not supported in current releases.
 
 Fetch a copy of this code and load dependencies with composer:
 
@@ -552,20 +563,3 @@ The developer docs are build with [doxygen](https://github.com/doxygen/doxygen).
     make -C doc clean && make -C doc
 
 Pull requests and bug reports welcome.
-
-<!-- ## Other versions
-TODO: Some notes about related OSS projects will go here.
-Some forks of this project have been developed by others for specific use cases. Improvements from the following projects have been incorporated into escpos-php:
-
-- [wdoyle/EpsonESCPOS-PHP](https://github.com/wdoyle/EpsonESCPOS-PHP)
-- [ronisaha/php-esc-pos](https://github.com/ronisaha/php-esc-pos)-->
-
-<!--
-TODO: A table of printer models vs programming guides available via the web would be good, but should go outside this README
-## Vendor documentation
-Epson notes that not all of its printers support all ESC/POS features, and includes a table in their documentation:
-
-* [FAQ about ESC/POS from Epson](http://content.epson.de/fileadmin/content/files/RSD/downloads/escpos.pdf)
-
-Note that many printers produced by other vendors use the same standard, and are compatible by varying degrees.
--->

composer.json

@@ -13,11 +13,11 @@
     ],
     "config": {
         "platform": {
-            "php": "5.3.9"
+            "php": "5.4.0"
         }
     },
     "require": {
-        "php": ">=5.3.9",
+        "php": ">=5.4.0",
         "ext-mbstring": "*"
     },
     "suggest": {
@@ -26,9 +26,9 @@
         "ext-gd": "Used for image printing if present."
     },
     "require-dev": {
-        "phpunit/phpunit": "4.8.*",
-        "squizlabs/php_codesniffer": "2.*",
-        "guzzlehttp/guzzle": "~3.0|~4.0|~5.0|~6.0"
+        "phpunit/phpunit": "^4.8",
+        "squizlabs/php_codesniffer": "^3.2",
+        "guzzlehttp/guzzle": "^5.3"
     },
     "autoload": {
         "psr-4": {