This tool converts Bluetooth keyboard or mouse events to USB HID Reports. It can be run on some limited devices that support the USB Gadget API, such as Raspberry Pi Zero.
First, connect a keyboard and a mouse to your device and trust these.
$ sudo bluetoothctl
[bluetooth]# scan on
...
[NEW] Device 00:00:00:00:00:00 YOUR_KEYBOARD_NAME
...
[bluetooth] # pair 00:00:00:00:00:00
[bluetooth] # connect 00:00:00:00:00:00
[bluetooth] # trust 00:00:00:00:00:00
Second, define udev rules.
$ git clone [email protected]:masawada/bt2usbhid.git
$ cd bt2usbhid
$ sudo cp config/99-bluetooth.rules.example /etc/udev/rules.d/99-bluetooth.rules
$ sudo $EDITOR /etc/udev/rules.d/99-bluetooth.rules
$ cat /etc/udev/rules.d/99-bluetooth.rules
KERNEL=="event*", ATTRS{name}=="YOUR_KEYBOARD_NAME", TAG+="systemd", SYMLINK+="input/keyboard", ENV{SYSTEMD_ALIAS}="/sys/class/input/keyboard"
KERNEL=="event*", ATTRS{name}=="YOUR_MOUSE_NAME", TAG+="systemd", SYMLINK+="input/mouse", ENV{SYSTEMD_ALIAS}="/sys/class/input/mouse"
You can use udevadm command to find the name of the devices:
$ udevadm info -a -p $(udevadm info -q path -n /dev/input/eventN)
...
looking at parent device '//devices/virtual/misc/uhid/0000:0000:0000.0000/input/inputN':
KERNELS=="input0"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{phys}=="00:00:00:00:00:00"
ATTRS{uniq}=="00:00:00:00:00:00"
ATTRS{properties}=="0"
ATTRS{name}=="YOUR_KEYBOARD_NAME"
...
After that, build and install the tool.
$ make
$ sudo make install
Restart the device after this installation process to start the tool.
If you use Raspberry Pi, setup OTG mode before restart:
$ echo 'dtoverlay=dwc2' | sudo tee -a /boot/config.txt
It is heavily inspired by moguno/event2usbhid.
Masayoshi Wada [email protected]