ArtNetSender

Overview

An Android app sending artnet signals to local network

Description

First Boot

• You have to decide which theme you use in the dialog shown below.

• You can change theme anytime after this.

  

• Dark Theme(left) and Light Theme(right)

  

• After deciding theme, the way to change theme is shown.

  

Setting IP Address

• First, press the "SET." button on the bottom-left.

  

• This is setting mode. To back to normal mode, press the "SET." button again.

• Now, press the "ADD" button next to the "SET." button.

  

• This is what I call "adding mode". To back to setting mode, press the "ADD" button again.

• You can also back to normal mode directly by pressing the "SET." button.

• You can set up IP Address to which ArtNet signal is send.

• Enter the IP Address using the keypad and press the "PLEASE" button.

  

• Then, the address you entered is shown.

• If you want to register more address, press the "ADD" button and follow the same procedure.

• You can check multiple address using the "BACK" and "NEXT" button.

• If you are to delete an address, display the address using "BACK" and "NEXT" button and press the "DEL" button.

  

Send the ArtNet Signal

• What you have to do is only entering command and press the "PLEASE" button.

Command example

• 255 is set to channel 1

1 FULL
1 AT FULL
1 AT 255

• 0 is set to channel 1

1 ZERO
1 AT ZERO
1 AT 0

• 123 is set to channel 1

1 AT 123

• 255 is set to channel 1, 2, 3, 4, and 5

1 THRU 5 FULL
1 THRU 5 AT FULL
1 THRU 5 AT 255

• 0 is set to channel 1, 2, 3, 4, and 5

1 THRU 5 ZERO
1 THRU 5 AT ZERO
1 THRU 5 AT 0

• 123 is set to channel 1, 2, 3, 4, and 5

1 THRU 5 AT 123

• 0 is set to channel 1, 255 is set to channel 5, and channel 2, 3, and 4 is set with the equal space between 0 and 255.
• Looks like stairs...

1 THRU 5 AT 0 THRU 255

• 255 is set to channel 1, 3, 5, 7, and 9

1 THRU 10 BY 2 FULL
1 THRU 10 BY 2 AT FULL
1 THRU 10 BY 2 AT 255

• 0 is set to channel 1, 3, 5, 7, and 9

1 THRU 10 BY 2 ZERO
1 THRU 10 BY 2 AT ZERO
1 THRU 10 BY 2 AT 0

• 123 is set to channel 1, 3, 5, 7, and 9

1 THRU 10 BY 2 AT 123

• 0 is set to channel 1, 255 is set to channel 9, and channel 3, 5, and 7 is set with the equal space between 0 and 255.
• Looks like stairs, too...
• Seeing is believing.

1 THRU 10 BY 2 AT 0 THRU 255

Command Diagram

Made by tabatkins/railroad-diagrams

License

This software is released under the GPLv3 License, see "LICENSE".