[Work in progress]
Minimal eurorack overdubbing sequencer with 3 independent channels. Two channels for gates and one channel for envelope from pad pressure value (12 bit).
One of three channels selectable for 1V/OCT DAC output (16 bit).
Channel One (Gate) -> Max 10 Sequences à 20 Notes
Channel Two (Gate) -> Max 10 Sequences à 20 Notes
Channel Three (Envelope) -> Max 5 Sequences à 5 Notes
Feed clock input to play/record sequences.
(Feed reset input to retrigger active sequence.)
Place notes by touching the notepad. Timing is not quantized.
Long press clickencoder to change active mode (PLAY/RECORD, NOTEEDIT, SAVE)
1: Play/Record
2: Active DAC output channel
3: Selected channel
4/5: Sequences/Notes
While in record mode: Place notes by touching the notepad. Press right button to delete last note.
Rotate clickencoder to select section.
Press left button to toggle between play/record.
Press left button to select the active DAC output channel.
Press left button to select one of the three channels.
Rotate clickencoder to select sequence slot.
Press left button to select or create sequence.
Long press right button to delete sequence.
Touch notepad and rotate clickencoder to change note value.
Press left button to save value.
Press right button to toggle clickencoder rotation speed.
Press right button to save active note values.
Press left button to load saved note values. (saved note values are loaded on start)
--> todo: save sequences