Bugfix 2.0.x

.github/lock.yml

@@ -0,0 +1,40 @@
+#
+# Configuration for Lock Threads - https://github.com/dessant/lock-threads-app
+#
+
+# Number of days of inactivity before a closed issue or pull request is locked
+daysUntilLock: 60
+
+# Skip issues and pull requests created before a given timestamp. Timestamp must
+# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
+skipCreatedBefore: false
+
+# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
+exemptLabels: [ 'no-locking' ]
+
+# Label to add before locking, such as `outdated`. Set to `false` to disable
+lockLabel: false
+
+# Comment to post before locking. Set to `false` to disable
+lockComment: >
+  This thread has been automatically locked since there has not been
+  any recent activity after it was closed. Please open a new issue for
+  related bugs.
+
+# Assign `resolved` as the reason for locking. Set to `false` to disable
+setLockReason: true
+
+# Limit to only `issues` or `pulls`
+# only: issues
+
+# Optionally, specify configuration settings just for `issues` or `pulls`
+# issues:
+#   exemptLabels:
+#     - help-wanted
+#   lockLabel: outdated
+
+# pulls:
+#   daysUntilLock: 30
+
+# Repository to extend settings from
+# _extends: repo

.github/workflows/close-stale.yml

@@ -0,0 +1,22 @@
+#
+# close-stale.yml
+# Close open issues after a period of inactivity
+#
+
+name: "Close stale issues"
+
+on:
+  schedule:
+  - cron: "0 1 * * *"
+
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/stale@v3
+      with:
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+        stale-issue-message: 'This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days.'
+        days-before-stale: 30
+        days-before-close: 5
+        stale-issue-label: 'stale-closing-soon'

.github/workflows/lock-closed.yml

@@ -0,0 +1,18 @@
+#
+# lock-closed.yml
+# Lock closed issues after a period of inactivity
+#
+
+name: "Lock closed issue"
+
+on:
+  issues:
+    types: [closed]
+
+jobs:
+  lock:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: OSDKDev/[email protected]
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/test-builds.yml

@@ -9,7 +9,6 @@ on:
   pull_request:
     branches:
     - bugfix-2.0.x
-    - dev-2.1.x
     paths-ignore:
     - config/**
     - data/**
@@ -49,6 +48,7 @@ jobs:
         - STM32F103RE_btt
         - STM32F103RE_btt_USB
         - STM32F103RC_fysetc
+        - STM32F103RC_meeb
         - jgaurora_a5s_a1
         - STM32F103VE_longer
         - STM32F407VE_black
@@ -63,9 +63,9 @@ jobs:
         - malyan_M300
         - mks_robin_lite
         - FLYF407ZG
-        - rumba32_f446ve
-        - rumba32_mks
+        - rumba32
         - mks_robin_pro
+        - STM32F103RET6_creality
 
         # Put lengthy tests last
 
@@ -105,6 +105,6 @@ jobs:
         # Inline tests script
         [[ "$GITHUB_REPOSITORY" == "MarlinFirmware/Marlin" ]] || exit 0
         chmod +x buildroot/bin/*
-        chmod +x buildroot/share/tests/*
-        export PATH=./buildroot/bin/:./buildroot/share/tests/:${PATH}
+        chmod +x buildroot/tests/*
+        export PATH=./buildroot/bin/:./buildroot/tests/:${PATH}
         run_tests . ${{ matrix.test-platform }}

Marlin/Configuration.h

@@ -36,7 +36,7 @@
  * Advanced settings can be found in Configuration_adv.h
  *
  */
-#define CONFIGURATION_H_VERSION 020005
+#define CONFIGURATION_H_VERSION 020006
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -145,7 +145,7 @@
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
-#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
+#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
@@ -373,6 +373,7 @@
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
  *   501 : 100K Zonestar (Tronxy X3A) Thermistor
+ *   502 : 100K Zonestar Thermistor used by hot bed in Zonestar Prusa P802M
  *   512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
@@ -815,6 +816,8 @@
  */
 #if DISABLED(CLASSIC_JERK)
   #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
+  #define JD_HANDLE_SMALL_SEGMENTS    // Use curvature estimation instead of just the junction angle
+                                      // for small segments (< 1mm) with large junction angles (> 135°).
 #endif
 
 /**
@@ -902,6 +905,11 @@
  */
 //#define BLTOUCH
 
+/**
+ * Pressure sensor with a BLTouch-like interface
+ */
+//#define CREALITY_TOUCH
+
 /**
  * Touch-MI Probe by hotends.fr
  *
@@ -976,7 +984,7 @@
 
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
-#define MIN_PROBE_EDGE 10
+#define PROBING_MARGIN 10
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
@@ -1920,6 +1928,8 @@
 // IMPORTANT: The U8glib library is required for Graphical Display!
 //            https://github.com/olikraus/U8glib_Arduino
 //
+// NOTE: If the LCD is unresponsive you may need to reverse the plugs.
+//
 
 //
 // RepRapDiscount FULL GRAPHIC Smart Controller
@@ -1988,6 +1998,12 @@
 //
 //#define MKS_MINI_12864
 
+//
+// MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout.
+// https://www.aliexpress.com/item/33018110072.html
+//
+//#define MKS_LCD12864
+
 //
 // FYSETC variant of the MINI12864 graphic controller with SD support
 // https://wiki.fysetc.com/Mini12864_Panel/
@@ -2114,10 +2130,25 @@
 //
 //#define FSMC_GRAPHICAL_TFT
 
+//
+// TFT Little VGL UI
+//
+//#define TFT_LITTLE_VGL_UI
+
 //=============================================================================
 //============================  Other Controllers  ============================
 //=============================================================================
 
+//
+// Robin nano v2.0 SPI touch screen
+//
+//#define SPI_GRAPHICAL_TFT
+
+//
+// Ender-3 v2 OEM display. A DWIN display with Rotary Encoder.
+//
+//#define DWIN_CREALITY_LCD
+
 //
 // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
 //