Do not allow running darwin/amd64 minikube binary on darwin/arm64 systems

[ilya-zuyev]

Fixes #10928

Before:

ilyaz@mymac --- z/minikube ‹master*➔ ?› » out/minikube-darwin-amd64  start
😄  minikube v1.19.0-beta.0 on Darwin 11.2
✨  Using the docker driver based on existing profile
👍  Starting control plane node minikube in cluster minikube
🚜  Pulling base image ...
💾  Downloading Kubernetes v1.20.2 preload ...
    > preloaded-images-k8s-v10-v1...: 491.71 MiB / 491.71 MiB  100.00% 5.45 MiB
    > gcr.io/k8s-minikube/kicbase...: 353.96 MiB / 353.96 MiB  100.00% 3.58 MiB
🔄  Restarting existing docker container for "minikube" ...
🐳  Preparing Kubernetes v1.20.2 on Docker 20.10.3 ...
💢  initialization failed, will try again: wait: /bin/bash -c "sudo env PATH=/var/lib/minikube/binaries/v1.20.2:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml  --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 139 from signal SEGV
stdout:

stderr:
qemu: uncaught target signal 11 (Segmentation fault) - core dumped


💣  Error starting cluster: wait: /bin/bash -c "sudo env PATH=/var/lib/minikube/binaries/v1.20.2:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml  --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 139 from signal SEGV
stdout:

stderr:
SIGSEGV: segmentation violation
PC=0x0 m=0 sigcode=0

goroutine 1 [running]:
qemu: uncaught target signal 11 (Segmentation fault) - core dumped


😿  minikube is exiting due to an error. If the above message is not useful, open an issue:
👉  https://github.com/kubernetes/minikube/issues/new/choose

❌  Exiting due to GUEST_START: wait: /bin/bash -c "sudo env PATH=/var/lib/minikube/binaries/v1.20.2:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml  --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 139 from signal SEGV
stdout:

stderr:
SIGSEGV: segmentation violation
PC=0x0 m=0 sigcode=0

After:

ilyaz@mymac --- z/minikube ‹ilyaz/do_not_run_amd64_on_m1* ?› » out/minikube-darwin-amd64 start

❌  Exiting due to MK_WRONG_BINARY_M1: You are trying to run amd64 binary on M1 system. Please use darwin/arm64 binary instead (Download at https://github.com/kubernetes/minikube/releases/download/v1.19.0-beta.0/minikube-darwin-amd64.

[ilya-zuyev]

/ok-to-test

[k8s-ci-robot]

[APPROVALNOTIFIER] This PR is APPROVED

This pull-request has been approved by: ilya-zuyev

The full list of commands accepted by this bot can be found here.

The pull request process is described here

Needs approval from an approver in each of these files:

• OWNERS [ilya-zuyev]

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[medyagh]

also PTAL at the lint

[minikube-pr-bot]

kvm2 Driver
Times for minikube: 115.7s 114.3s 100.6s
Average time for minikube: 110.2s

Times for Minikube (PR 11024): 102.4s 100.4s 120.3s
Average time for Minikube (PR 11024): 107.7s

Averages Time Per Log

+--------------------------------------------+----------+---------------------+
|                    LOG                     | MINIKUBE | MINIKUBE (PR 11024) |
+--------------------------------------------+----------+---------------------+
| * minikube v1.19.0-beta.0 on               | 0.0s     | 0.0s                |
| Debian 9.11 (kvm/amd64)                    |          |                     |
| * Using the kvm2 driver based              | 0.0s     | 0.0s                |
| on user configuration                      |          |                     |
| * Starting control plane node              | 0.1s     | 0.0s                |
| minikube in cluster minikube               |          |                     |
| * Downloading Kubernetes                   | 8.9s     |                     |
| v1.20.5 preload ...                        |          |                     |
| * Creating kvm2 VM (CPUs=2,                | 34.6s    | 32.6s               |
| Memory=4000MB, Disk=20000MB)               |          |                     |
| ...                                        |          |                     |
| * Preparing Kubernetes v1.20.5             | 1.9s     | 1.6s                |
| on Docker 20.10.4 ...                      |          |                     |
|   - Generating certificates                | 1.9s     | 2.4s                |
| and keys ...                               |          |                     |
|   - Booting up control plane               | 63.6s    | 66.0s               |
| ...                                        |          |                     |
|   - Configuring RBAC rules ...             | 1.3s     | 1.3s                |
| * Verifying Kubernetes                     | 0.0s     | 0.0s                |
| components...                              |          |                     |
|   - Using image                            | 3.7s     | 3.6s                |
| gcr.io/k8s-minikube/storage-provisioner:v5 |          |                     |
| * Enabled addons:                          | 0.0s     | 0.1s                |
| storage-provisioner,                       |          |                     |
| default-storageclass                       |          |                     |
| * Done! kubectl is now                     | 0.0s     | 0.0s                |
| configured to use "minikube"               |          |                     |
| cluster and "default"                      |          |                     |
| namespace by default                       |          |                     |
+--------------------------------------------+----------+---------------------+

docker Driver
Times for minikube: 130.9s 87.9s 91.3s
Average time for minikube: 103.4s

Times for Minikube (PR 11024): 119.9s 139.2s 119.7s
Average time for Minikube (PR 11024): 126.3s

Averages Time Per Log

+--------------------------------------------+----------+---------------------+
|                    LOG                     | MINIKUBE | MINIKUBE (PR 11024) |
+--------------------------------------------+----------+---------------------+
| * minikube v1.19.0-beta.0 on               | 0.1s     | 0.1s                |
| Debian 9.11 (kvm/amd64)                    |          |                     |
| * Using the docker driver                  | 0.1s     | 0.1s                |
| based on user configuration                |          |                     |
| * Starting control plane node              | 0.1s     | 0.1s                |
| minikube in cluster minikube               |          |                     |
| * Creating docker container                | 6.8s     | 6.6s                |
| (CPUs=2, Memory=4000MB) ...                |          |                     |
| * Preparing Kubernetes v1.20.5             | 95.7s    | 118.9s              |
| on Docker 20.10.5 ...                      |          |                     |
| * Verifying Kubernetes                     | 0.1s     | 0.1s                |
| components...                              |          |                     |
|   - Using image                            | 0.5s     | 0.4s                |
| gcr.io/k8s-minikube/storage-provisioner:v5 |          |                     |
| * Enabled addons:                          | 0.0s     | 0.0s                |
| storage-provisioner,                       |          |                     |
| default-storageclass                       |          |                     |
| * Done! kubectl is now                     | 0.0s     | 0.0s                |
| configured to use "minikube"               |          |                     |
| cluster and "default"                      |          |                     |
| namespace by default                       |          |                     |
+--------------------------------------------+----------+---------------------+

[ilya-zuyev]

also PTAL at the lint

fixed

[minikube-pr-bot]

kvm2 Driver
Times for minikube: 115.7s 121.6s 120.4s
Average time for minikube: 119.2s

Times for Minikube (PR 11024): 113.0s 103.6s 100.8s
Average time for Minikube (PR 11024): 105.8s

Averages Time Per Log

+--------------------------------------------+----------+---------------------+
|                    LOG                     | MINIKUBE | MINIKUBE (PR 11024) |
+--------------------------------------------+----------+---------------------+
| * minikube v1.19.0-beta.0 on               | 0.0s     | 0.0s                |
| Debian 9.11 (kvm/amd64)                    |          |                     |
| * Using the kvm2 driver based              | 0.0s     | 0.0s                |
| on user configuration                      |          |                     |
| * Starting control plane node              | 0.0s     | 0.0s                |
| minikube in cluster minikube               |          |                     |
| * Creating kvm2 VM (CPUs=2,                | 33.5s    | 32.7s               |
| Memory=4000MB, Disk=20000MB)               |          |                     |
| ...                                        |          |                     |
| * Preparing Kubernetes v1.20.5             | 1.4s     | 1.9s                |
| on Docker 20.10.4 ...                      |          |                     |
|   - Generating certificates                | 2.7s     | 2.6s                |
| and keys ...                               |          |                     |
|   - Booting up control plane               | 77.3s    | 63.7s               |
| ...                                        |          |                     |
|   - Configuring RBAC rules ...             | 1.4s     | 1.3s                |
| * Verifying Kubernetes                     | 0.0s     | 0.0s                |
| components...                              |          |                     |
|   - Using image                            | 2.8s     | 3.6s                |
| gcr.io/k8s-minikube/storage-provisioner:v5 |          |                     |
| * Enabled addons:                          | 0.0s     | 0.0s                |
| default-storageclass,                      |          |                     |
| storage-provisioner                        |          |                     |
| * Done! kubectl is now                     | 0.0s     | 0.0s                |
| configured to use "minikube"               |          |                     |
| cluster and "default"                      |          |                     |
| namespace by default                       |          |                     |
+--------------------------------------------+----------+---------------------+

docker Driver
Times for minikube: 107.7s 160.3s 139.8s
Average time for minikube: 135.9s

Times for Minikube (PR 11024): 87.6s 106.4s 140.3s
Average time for Minikube (PR 11024): 111.4s

Averages Time Per Log

+--------------------------------------------+----------+---------------------+
|                    LOG                     | MINIKUBE | MINIKUBE (PR 11024) |
+--------------------------------------------+----------+---------------------+
| * minikube v1.19.0-beta.0 on               | 0.1s     | 0.1s                |
| Debian 9.11 (kvm/amd64)                    |          |                     |
| * Using the docker driver                  | 0.1s     | 0.1s                |
| based on user configuration                |          |                     |
| * Starting control plane node              | 0.0s     | 0.1s                |
| minikube in cluster minikube               |          |                     |
| * Creating docker container                | 6.9s     | 6.7s                |
| (CPUs=2, Memory=4000MB) ...                |          |                     |
| * Preparing Kubernetes v1.20.5             | 128.2s   | 103.8s              |
| on Docker 20.10.5 ...                      |          |                     |
| * Verifying Kubernetes                     | 0.1s     | 0.1s                |
| components...                              |          |                     |
|   - Using image                            | 0.5s     | 0.5s                |
| gcr.io/k8s-minikube/storage-provisioner:v5 |          |                     |
| * Enabled addons:                          | 0.0s     | 0.0s                |
| storage-provisioner,                       |          |                     |
| default-storageclass                       |          |                     |
| * Done! kubectl is now                     | 0.0s     | 0.0s                |
| configured to use "minikube"               |          |                     |
| cluster and "default"                      |          |                     |
| namespace by default                       |          |                     |
+--------------------------------------------+----------+---------------------+