Spanish dnn rnn recipe

egs/fisher_callhome_spanish/s5/conf/mfcc_hires.conf

@@ -0,0 +1,10 @@
+# config for high-resolution MFCC features, intended for neural network training.
+# Note: we keep all cepstra, so it has the same info as filterbank features,
+# but MFCC is more easily compressible (because less correlated) which is why
+# we prefer this method.
+--use-energy=false   # use average of log energy, not energy.
+--sample-frequency=8000 #  Switchboard is sampled at 8kHz
+--num-mel-bins=40     # similar to Google's setup.
+--num-ceps=40     # there is no dimensionality reduction.
+--low-freq=40    # low cutoff frequency for mel bins
+--high-freq=-200 # high cutoff frequently, relative to Nyquist of 4000 (=3800)

egs/fisher_callhome_spanish/s5/conf/online_cmvn.conf

@@ -0,0 +1 @@
+# configuration file for apply-cmvn-online, used in the script ../local/run_online_decoding.sh

egs/fisher_callhome_spanish/s5/local/chain/run_tdnn_1g.sh

@@ -0,0 +1,282 @@
+#!/bin/bash
+
+# 1g is like 1f but upgrading to a "resnet-style TDNN-F model", i.e.
+#   with bypass resnet connections, and re-tuned.
+
+
+set -e -o pipefail
+
+# First the options that are passed through to run_ivector_common.sh
+# (some of which are also used in this script directly).
+stage=0
+nj=30
+train_set=train
+test_sets="test dev"
+gmm=tri5a        # this is the source gmm-dir that we'll use for alignments; it
+                 # should have alignments for the specified training data.
+num_threads_ubm=32
+nnet3_affix=       # affix for exp dirs, e.g. it was _cleaned in tedlium.
+
+# Options which are not passed through to run_ivector_common.sh
+affix=1g   #affix for TDNN+LSTM directory e.g. "1a" or "1b", in case we change the configuration.
+common_egs_dir=
+reporting_email=
+
+# LSTM/chain options
+train_stage=-10
+xent_regularize=0.1
+dropout_schedule='0,[email protected],[email protected],0'
+
+# training chunk-options
+chunk_width=140,100,160
+# we don't need extra left/right context for TDNN systems.
+chunk_left_context=0
+chunk_right_context=0
+
+# training options
+srand=0
+remove_egs=true
+
+#decode options
+test_online_decoding=false  # if true, it will run the last decoding stage.
+
+# End configuration section.
+echo "$0 $@"  # Print the command line for logging
+
+
+. ./cmd.sh
+. ./path.sh
+. ./utils/parse_options.sh
+
+
+if ! cuda-compiled; then
+  cat <<EOF && exit 1
+This script is intended to be used with GPUs but you have not compiled Kaldi with CUDA
+If you want to use GPUs (and have them), go to src/, and configure and make on a machine
+where "nvcc" is installed.
+EOF
+fi
+
+if [ $stage -le 15 ]; then
+echo "local/nnet3/run_ivector_common.sh \
+  --stage $stage --nj $nj \
+  --train-set $train_set --gmm $gmm \
+  --num-threads-ubm $num_threads_ubm \
+  --nnet3-affix "$nnet3_affix""
+
+local/nnet3/run_ivector_common.sh \
+  --stage $stage --nj $nj \
+  --train-set $train_set --gmm $gmm \
+  --num-threads-ubm $num_threads_ubm \
+  --nnet3-affix "$nnet3_affix"
+
+fi
+
+
+gmm_dir=exp/${gmm}
+ali_dir=exp/${gmm}_ali_${train_set}_sp
+lat_dir=exp/tri5a_lats_nodup_sp
+dir=exp/chain/multipsplice_tdnn
+train_data_dir=data/${train_set}_sp_hires
+train_ivector_dir=exp/nnet3/ivectors_train_sp_hires
+lores_train_data_dir=data/${train_set}_sp
+
+# note: you don't necessarily have to change the treedir name
+# each time you do a new experiment-- only if you change the
+# configuration in a way that affects the tree.
+tree_dir=exp/chain/${gmm}_tree
+# the 'lang' directory is created by this script.
+# If you create such a directory with a non-standard topology
+# you should probably name it differently.
+lang=data/lang_${gmm}_chain
+
+#for f in $train_data_dir/feats.scp $train_ivector_dir/ivector_online.scp \
+#    $lores_train_data_dir/feats.scp $gmm_dir/final.mdl \
+#    $ali_dir/ali.1.gz $gmm_dir/final.mdl; do
+#  [ ! -f $f ] && echo "$0: expected file $f to exist" && exit 1
+#done
+
+
+if [ $stage -le 16 ]; then
+  echo "$0: creating lang directory $lang with chain-type topology"
+  # Create a version of the lang/ directory that has one state per phone in the
+  # topo file. [note, it really has two states.. the first one is only repeated
+  # once, the second one has zero or more repeats.]
+  if [ -d $lang ]; then
+    if [ $lang/L.fst -nt data/lang/L.fst ]; then
+      echo "$0: $lang already exists, not overwriting it; continuing"
+    else
+      echo "$0: $lang already exists and seems to be older than data/lang..."
+      echo " ... not sure what to do.  Exiting."
+      exit 1;
+    fi
+  else
+    cp -r data/lang $lang
+    silphonelist=$(cat $lang/phones/silence.csl) || exit 1;
+    nonsilphonelist=$(cat $lang/phones/nonsilence.csl) || exit 1;
+    # Use our special topology... note that later on may have to tune this
+    # topology.
+    steps/nnet3/chain/gen_topo.py $nonsilphonelist $silphonelist >$lang/topo
+  fi
+fi
+
+if [ $stage -le 17 ]; then
+  # Get the alignments as lattices (gives the chain training more freedom).
+  # use the same num-jobs as the alignments
+  steps/align_fmllr_lats.sh --nj 100 --cmd "$train_cmd" ${lores_train_data_dir} \
+    data/lang $gmm_dir $lat_dir
+  rm $lat_dir/fsts.*.gz # save space
+fi
+
+if [ $stage -le 18 ]; then
+  # Build a tree using our new topology.  We know we have alignments for the
+  # speed-perturbed data (local/nnet3/run_ivector_common.sh made them), so use
+  # those.  The num-leaves is always somewhat less than the num-leaves from
+  # the GMM baseline.
+   if [ -f $tree_dir/final.mdl ]; then
+     echo "$0: $tree_dir/final.mdl already exists, refusing to overwrite it."
+     exit 1;
+  fi
+  steps/nnet3/chain/build_tree.sh \
+    --frame-subsampling-factor 3 \
+    --context-opts "--context-width=2 --central-position=1" \
+    --cmd "$train_cmd" 3500 ${lores_train_data_dir} \
+    $lang $ali_dir $tree_dir
+fi
+
+
+if [ $stage -le 19 ]; then
+  mkdir -p $dir
+  echo "$0: creating neural net configs using the xconfig parser";
+
+  num_targets=$(tree-info $tree_dir/tree |grep num-pdfs|awk '{print $2}')
+  learning_rate_factor=$(echo "print 0.5/$xent_regularize" | python)
+  tdnn_opts="l2-regularize=0.01 dropout-proportion=0.0 dropout-per-dim-continuous=true"
+  tdnnf_opts="l2-regularize=0.01 dropout-proportion=0.0 bypass-scale=0.66"
+  linear_opts="l2-regularize=0.01 orthonormal-constraint=-1.0"
+  prefinal_opts="l2-regularize=0.01"
+  output_opts="l2-regularize=0.005"
+
+  mkdir -p $dir/configs
+  cat <<EOF > $dir/configs/network.xconfig
+  input dim=100 name=ivector
+  input dim=40 name=input
+
+  # please note that it is important to have input layer with the name=input
+  # as the layer immediately preceding the fixed-affine-layer to enable
+  # the use of short notation for the descriptor
+  fixed-affine-layer name=lda input=Append(-1,0,1,ReplaceIndex(ivector, t, 0)) affine-transform-file=$dir/configs/lda.mat
+
+  # the first splicing is moved before the lda layer, so no splicing here
+  relu-batchnorm-dropout-layer name=tdnn1 $tdnn_opts dim=1024
+  tdnnf-layer name=tdnnf2 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=1
+  tdnnf-layer name=tdnnf3 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=1
+  tdnnf-layer name=tdnnf4 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=1
+  tdnnf-layer name=tdnnf5 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=0
+  tdnnf-layer name=tdnnf6 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=3
+  tdnnf-layer name=tdnnf7 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=3
+  tdnnf-layer name=tdnnf8 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=3
+  tdnnf-layer name=tdnnf9 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=3
+  tdnnf-layer name=tdnnf10 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=3
+  tdnnf-layer name=tdnnf11 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=3
+  tdnnf-layer name=tdnnf12 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=3
+  tdnnf-layer name=tdnnf13 $tdnnf_opts dim=1024 bottleneck-dim=128 time-stride=3
+  linear-component name=prefinal-l dim=192 $linear_opts
+
+
+  prefinal-layer name=prefinal-chain input=prefinal-l $prefinal_opts big-dim=1024 small-dim=192
+  output-layer name=output include-log-softmax=false dim=$num_targets $output_opts
+
+  prefinal-layer name=prefinal-xent input=prefinal-l $prefinal_opts big-dim=1024 small-dim=192
+  output-layer name=output-xent dim=$num_targets learning-rate-factor=$learning_rate_factor $output_opts
+EOF
+  steps/nnet3/xconfig_to_configs.py --xconfig-file $dir/configs/network.xconfig --config-dir $dir/configs/
+fi
+
+
+if [ $stage -le 20 ]; then
+  if [[ $(hostname -f) == *.clsp.jhu.edu ]] && [ ! -d $dir/egs/storage ]; then
+    utils/create_split_dir.pl \
+     /export/b0{3,4,5,6}/$USER/kaldi-data/egs/wsj-$(date +'%m_%d_%H_%M')/s5/$dir/egs/storage $dir/egs/storage
+  fi
+
+  steps/nnet3/chain/train.py --stage=$train_stage \
+    --cmd "$decode_cmd" \
+    --feat.online-ivector-dir $train_ivector_dir \
+    --feat.cmvn-opts "--norm-means=false --norm-vars=false" \
+    --chain.xent-regularize $xent_regularize \
+    --chain.leaky-hmm-coefficient 0.1 \
+    --chain.l2-regularize 0.0 \
+    --chain.apply-deriv-weights false \
+    --chain.lm-opts="--num-extra-lm-states=2000" \
+    --trainer.dropout-schedule $dropout_schedule \
+    --trainer.srand $srand \
+    --trainer.max-param-change 2.0 \
+    --trainer.num-epochs 4 \
+    --trainer.frames-per-iter 5000000 \
+    --trainer.optimization.num-jobs-initial 1 \
+    --trainer.optimization.num-jobs-final=2 \
+    --trainer.optimization.initial-effective-lrate 0.0005 \
+    --trainer.optimization.final-effective-lrate 0.00005 \
+    --trainer.num-chunk-per-minibatch 128,64 \
+    --trainer.optimization.momentum 0.0 \
+    --egs.chunk-width $chunk_width \
+    --egs.chunk-left-context 0 \
+    --egs.chunk-right-context 0 \
+    --egs.dir "$common_egs_dir" \
+    --egs.opts "--frames-overlap-per-eg 0" \
+    --cleanup.remove-egs $remove_egs \
+    --use-gpu true \
+    --feat-dir $train_data_dir \
+    --tree-dir $tree_dir \
+    --lat-dir exp/tri5a_lats_nodup_sp \
+    --dir $dir  || exit 1;
+fi
+
+if [ $stage -le 21 ]; then
+  # The reason we are using data/lang_test here, instead of $lang, is just to
+  # emphasize that it's not actually important to give mkgraph.sh the
+  # lang directory with the matched topology (since it gets the
+  # topology file from the model).  So you could give it a different
+  # lang directory, one that contained a wordlist and LM of your choice,
+  # as long as phones.txt was compatible.
+  #LM was trained only on Fisher Spanish train subset.
+
+  utils/mkgraph.sh \
+    --self-loop-scale 1.0 data/lang_test \
+    $tree_dir $tree_dir/graph_fsp_train || exit 1;
+
+fi
+
+rnnlmdir=exp/rnnlm_lstm_tdnn_1b
+if [ $stage -le 22 ]; then
+  local/rnnlm/train_rnnlm.sh --dir $rnnlmdir || exit 1;
+fi
+
+if [ $stage -le 23 ]; then
+  frames_per_chunk=$(echo $chunk_width | cut -d, -f1)
+  rm $dir/.error 2>/dev/null || true
+
+  for data in $test_sets; do
+    (
+      nspk=$(wc -l <data/${data}_hires/spk2utt)
+      for lmtype  in fsp_train; do
+        steps/nnet3/decode.sh \
+          --acwt 1.0 --post-decode-acwt 10.0 \
+          --extra-left-context 0 --extra-right-context 0 \
+          --extra-left-context-initial 0 \
+          --extra-right-context-final 0 \
+          --frames-per-chunk $frames_per_chunk \
+          --nj $nspk --cmd "$decode_cmd"  --num-threads 4 \
+          --online-ivector-dir exp/nnet3/ivectors_${data}_hires \
+          $tree_dir/graph_${lmtype} data/${data}_hires ${dir}/decode_${lmtype}_${data} || exit 1;
+      done
+      bash local/rnnlm/lmrescore_nbest.sh 1.0 data/lang_test $rnnlmdir data/${data}_hires/ \
+	      ${dir}/decode_${lmtype}_${data} $dir/decode_rnnLM_${lmtype}_${data} || exit 1;
+    ) || touch $dir/.error &
+  done
+  wait
+  [ -f $dir/.error ] && echo "$0: there was a problem while decoding" && exit 1
+fi
+
+exit 0;