Merge pull request #5 from marksard/add_stonehenge30_keyboard

add stonehenge30 keymap

keyboards/stonehenge30_ble/board/custom_board.h

@@ -0,0 +1,89 @@
+/**
+ * Copyright (c) 2014 - 2017, Nordic Semiconductor ASA
+ * Copyright (c) 2018, Sekigon
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef CUSTOM_BOARD_H
+#define CUSTOM_BOARD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//#include "nrf_gpio.h"
+
+#define GPIO(port, pin) ((port << 6) | pin)
+#define PIN1 GPIO(0,8)
+#define PIN2 GPIO(0,11)
+#define PIN5 GPIO(0,18)
+#define PIN6 GPIO(0,16)
+#define PIN7 GPIO(0,19)
+#define PIN8 GPIO(0,20)
+#define PIN9 GPIO(0,22)
+#define PIN10 GPIO(0,23)
+#define PIN11 GPIO(1,0)
+#define PIN12 GPIO(1,3)
+
+#define PIN13 GPIO(0,9)
+#define PIN14 GPIO(0,10)
+#define PIN15 GPIO(1,15)
+#define PIN16 GPIO(1,14)
+#define PIN17 GPIO(0,3)
+#define PIN18 GPIO(0,30)
+#define PIN19 GPIO(0,0)
+#define PIN20 GPIO(0,5)
+//#define NRF_LOG_ENABLED 0
+//#define NRF_LOG_BACKEND_SERIAL_USES_UART 0
+//#define NRF_LOG_BACKEND_SERIAL_UART_TX_PIN 5
+#define NRF_LOG_BACKEND_UART_TX_PIN 8
+//#define DEBUG
+// Low frequency clock source to be used by the SoftDevice
+#ifdef S210
+// #define NRF_CLOCK_LFCLKSRC      NRF_CLOCK_LFCLKSRC_XTAL_20_PPM
+#else
+#define NRF_CLOCK_LFCLKSRC      {.source        = NRF_CLOCK_LF_SRC_RC,            \
+                                 .rc_ctiv       = 16,                                \
+                                 .rc_temp_ctiv  = 2,                                \
+                                 .xtal_accuracy = 0}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // CUSTOM_BOARD_H

keyboards/stonehenge30_ble/config.h

@@ -0,0 +1,79 @@
+/*
+Copyright 2018 Marksard
+Copyright 2019 Sekigon
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xDFA4
+#define DEVICE_VER      0x0010
+#define MANUFACTURER    marksard
+#define PRODUCT         stonehenge30 BLE
+#define DESCRIPTION     Minimal Symmetrical Staggerd 30 Keys Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 6
+
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    1
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define TAPPING_TERM 200
+#define PREVENT_STUCK_MODIFIERS
+#define IGNORE_MOD_TAP_INTERRUPT
+//#define DEBUG_ACTION
+
+//#define RGBLIGHT_ANIMATIONS
+//#define RGB_DI_PIN 8     // The pin the LED strip is connected to
+//#define RGBLED_NUM 5     // Number of LEDs in your strip
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif