Skip to content

An Ada 2012 / SPARK 2014 project that implements the NORX authenticated encryption algorithm

License

Notifications You must be signed in to change notification settings

jhumphry/SPARK_NORX

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SPARK_NORX

Introduction

This is an Ada 2012 / SPARK 2014 project that implements the NORX Authenticated Encryption with Additional Data Algorithm, a third round candidate in the CAESAR competition. NORX was designed by Jean-Philippe Aumasson, Philipp Jovanovic and Samuel Neves.

The Ada code is written as a generic template, and each variant of NORX is generated from the same code. There are some requirements of the Ada implementation (for example, Storage_Element must be an 8-bit byte) and of the generic parameters (for example the rate, key size etc must all be multiples of the word size).

This project targets version 3.0 of the specification for NORX32 and NORX64. The variants for low-end systems are based on the separate paper 'NORX8 and NORX16: Authenticated Encryption for Low-End Systems' by the same authors but with some modifications applied to maintain consistency with the revisions made to the main specification.

This project is free software (using the ISC permissive licence) and is provided with no warranties, as set out in the file LICENSE.

Overview of the packages

The main generic package is NORX which implements the high-level API as set out in the NORX specification. This consists of just two procedures, AEADEnc and AEADDec. The former procedure takes in a key K, a 'nonce' N, an optional message header A (not encrypted), optional message to be encrypted M and optional trailer Z (not encrypted) and returns the encrypted cipher-text C and the authentication tag T. The latter procedure performs the decryption and returns the decoded message and a Boolean that indicates whether the message was valid. If any of A, M or Z parameters are not used, the constant Null_Storage_Array can be passed to the routines.

Packages NORX6441 etc. are instantiations of this generic with the parameters suggested by the NORX designers.

NORX_Definitions defines some constrained types used in the generic formal parameters and NORX_Load_Store contains functions that convert between standard word sizes and Storage_Array in Little-Endian format.

NORX.Access_Internals allows access to the lower-level API which allows you to follow the internal state of the cipher as it processes some data. NORX.Utils contains useful helper functions for printing out Storage_Array and State types.

Examples

Three example programs are included. norx_example is a simple example of using the high-level API and demonstrates successful encryption and decryption, and also unsuccessful decryption if the tag is altered.

norx_test_vectors uses the lower-level API to print the trace of a sample encryption for each of the suggested variants of NORX. These can be compared with the output from running make debug on the reference C code provided by the NORX designers.

norx_check_padding checks that authenticated encryption and decryption works correctly when the lengths of the header, message and trailer inputs vary. This is primarily to check for any bugs in the implementation of the padding.

Status of SPARK proof

As the code is written in SPARK, all of the standard instantiations of NORX can be proved free of run-time exceptions for all but one type of check. Currently SPARK cannot prove the full initialisation of output arrays where this is done one element at a time in a loop rather than in a single array expression. SPARK will therefore report unproved checks of the form '"C" might not be initialised' for each procedure with an array output. Simply zeroing the output arrays at the start of the procedures would resolve these unproved checks, but this would be inefficient and would hide any real errors. Instead assertions of the form C_Index = C'Last + 1 are proved at the end of the procedures. These show that the whole array has been iterated over by the time the procedure exits. pragma Annotate has been used to justify the output array initialisation for these procedures.

However, SPARK GPL 2016, SPARK Discovery GPL 2017 and GNAT Community 2018 are able to prove the absence of all other potential sources of run-time exceptions, which amount to 98% of the checks, without manual intervention. It also proves that AEADDec will not return any decrypted data if the tag verification failed. The GPL SPARK prover gnatprove shipped with GNAT Community 2018 from AdaCore is primarily used for this project.

Project files

Three project files for use with GPRBuild are provided. spark_norx.gpr builds the NORX code as a static library. It takes two optional parameters:

  • mode can be set to debug (the default) or optimise/optimize. This sets appropriate compiler flags.

  • load_store can be set to explicit (the default) or le. This setting controls how arrays of bytes are converted into words. The explicit setting compiles functions that use bit shifts and bit-wise operators to perform the conversions. The explicit setting should work everywhere. The le setting uses unchecked type conversions. This may be faster but requires a Little-Endian machine and an Ada compiler which uses compatible machine representation for the types.

spark_norx_external.gpr covers the same code, but does not trigger rebuilds of the library. spark_norx_examples.gpr builds the example code.

Using GNATprove for verification

To automatically verify the code (apart from array initialisation as discussed above), the GPS IDE can be used. Alternatively the following commands can be used at the shell. The settings may need to be varied depending on the speed of your machine.

  • SPARK GPL 2016

    gnatprove -P spark_norx.gpr -U -j0 --level=0 --proof=progressive --warnings=continue

  • SPARK Discovery GPL 2017

    gnatprove -P spark_norx.gpr -Xload_store=explicit -Xmode=debug -j0 --level=2

  • GNAT Community 2018

    gnatprove -P spark_norx.gpr -j0 -Xload_store=explicit -Xmode=debug --level=0

Add --report=all if you want to see the checks that are proved as well.

For SPARK Discovery GPL 2017 the built-in SMT solver, Alt-Ergo, may not be able to prove all of the VC. Add the alternative Z3 and/or CVC4 provers as explained in the SPARK user guide.

Acknowledgements

Thanks to Philipp Jovanovic (NORX team), Claire Dross (AdaCore) and Yannick Moy (AdaCore) for helpful comments and suggestions.

About

An Ada 2012 / SPARK 2014 project that implements the NORX authenticated encryption algorithm

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages