A thin Python library for the Abode alarm API.
"Abode" is a trademark owned by Abode Systems, Inc.; see www.goabode.com for more information.
Thanks to Abode for having a relatively simple API to reverse engineer. Maybe in the future Abode will open it up for official use.
API calls faster than 60 seconds is not recommended as it can overwhelm Abode's servers. Leverage the cloud push event notification functionality as much as possible. Please use this module responsibly.
Simple command line implementation arguments:
$ abode --help
usage: abode [-h] [-u USERNAME] [-p PASSWORD] [--mfa MFA] [--cache pickle_file]
[--mode] [--arm mode] [--set setting=value] [--devices]
[--device device_id] [--json device_id] [--on device_id] [--off device_id]
[--lock device_id] [--unlock device_id] [--automations]
[--activate automation_id] [--deactivate automation_id]
[--trigger automation_id] [--capture device_id] [--stream device_id]
[--image device_id=location/image.jpg] [--listen] [--debug] [--quiet]
options:
-h, --help show this help message and exit
-u USERNAME, --username USERNAME
Username
-p PASSWORD, --password PASSWORD
Password
--mfa MFA Multifactor authentication code
--cache pickle_file Create/update/use a pickle cache for the username and password.
--mode Output current alarm mode
--arm mode Arm alarm to mode
--set setting=value Set setting to a value
--devices Output all devices
--device device_id Output one device for device_id
--json device_id Output the json for device_id
--on device_id Switch on a given device_id
--off device_id Switch off a given device_id
--lock device_id Lock a given device_id
--unlock device_id Unlock a given device_id
--automations Output all automations
--activate automation_id
Activate (enable) an automation by automation_id
--deactivate automation_id
Deactivate (disable) an automation by automation_id
--trigger automation_id
Trigger (apply) a manual (quick) automation by automation_id
--capture device_id Trigger a new image capture for the given device_id
--stream device_id Start a new KVS video stream for the given device_id
--image device_id=location/image.jpg
Save an image from a camera (if available) to the given path
--listen Block and listen for device_id
--debug Enable debug logging
--quiet Output only warnings and errors
First invocation, simply log in:
$ abode --username [email protected] Password for [email protected]: 2022-10-18 20:30:18 INFO (MainThread) [jaraco.abode] Updating all devices... 2022-10-18 20:30:18 INFO (MainThread) [jaraco.abode] Login successful 2022-10-18 20:30:19 INFO (MainThread) [jaraco.abode] Logout successful
Pass --username with each invocation or set the environment variable
ABODE_USERNAME in the environment.
Get the current alarm mode:
$ abode --mode Mode: standby
Set the alarm mode to one of 'standby', 'home', or 'away':
$ abode --arm home Mode set to: home
List all devices and their current states:
$ abode --devices Device Name: Glass Break Sensor, Device ID: RF:xxxxxxxx, Device Type: GLASS, Device Status: Online Device Name: Keypad, Device ID: RF:xxxxxxxx, Device Type: Keypad, Device Status: Online Device Name: Remote, Device ID: RF:xxxxxxxx, Device Type: Remote Controller, Device Status: Online Device Name: Garage Entry Door, Device ID: RF:xxxxxxxx, Device Type: Door Contact, Device Status: Closed Device Name: Front Door, Device ID: RF:xxxxxxxx, Device Type: Door Contact, Device Status: Closed Device Name: Back Door, Device ID: RF:xxxxxxxx, Device Type: Door Contact, Device Status: Closed Device Name: Status Indicator, Device ID: ZB:xxxxxxxx, Device Type: Status Display, Device Status: Online Device Name: Downstairs Motion Camera, Device ID: ZB:xxxxxxxx, Device Type: Motion Camera, Device Status: Online Device Name: Back Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed Device Name: Front Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed Device Name: Alarm area_1, Device ID: area_1, Device Type: Alarm, Device Status: standby
Query the current state of a specific device using the device id:
$ abode --device ZW:xxxxxxxx Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed
Query multiple specific devices by device id:
$ abode --device ZW:xxxxxxxx --device RF:xxxxxxxx Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed Device Name: Back Door, Device ID: RF:xxxxxxxx, Device Type: Door Contact, Device Status: Closed
Switch a device on or off, or lock and unlock a device by passing multiple arguments:
$ abode --lock ZW:xxxxxxxx --switchOn ZW:xxxxxxxx Locked device with id: ZW:xxxxxxxx Switched on device with id: ZW:xxxxxxxx
Block and listen for all mode and change events as they occur:
$ abode --listen No devices specified, adding all devices to listener... Listening for device updates... Device Name: Alarm area_1, Device ID: area_1, Status: standby, At: 2017-05-27 11:13:08 Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Status: LockOpen, At: 2017-05-27 11:13:31 Device Name: Garage Entry Door, Device ID: RF:xxxxxxxx, Status: Open, At: 2017-05-27 11:13:34 Device Name: Garage Entry Door, Device ID: RF:xxxxxxxx, Status: Closed, At: 2017-05-27 11:13:39 Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Status: LockClosed, At: 2017-05-27 11:13:41 Device Name: Alarm area_1, Device ID: area_1, Status: home, At: 2017-05-27 11:13:59 Device update listening stopped.
If you specify one or more devices with the --device argument along with the --listen command then only those devices will listen for change events.
Keyboard interrupt (CTRL+C) to exit listening mode.
To obtain a list of automations:
$ abode --automations Deadbolts Lock Home (ID: 6) - status - active Auto Home (ID: 3) - location - active Lock Garage Quick Action (ID: 7) - manual - active Deadbolts Lock Away (ID: 5) - status - active Autostandby (ID: 4) - schedule - active Auto Away (ID: 2) - location - active Sleep Mode (ID: 1) - schedule - active
To activate or deactivate an automation:
$ abode --activate 1 Activated automation with id: 1
To trigger a manual (quick) automation:
$ abode --trigger 7 Triggered automation with id: 1
Change settings either using abode.set_setting(setting, value) or through the command line:
$ abode --set beeper_mute=1 Setting beeper_mute changed to 1
| Setting | Valid Values |
|---|---|
| ircamera_resolution_t | 0 for 320x240x3, 2 for 640x480x3 |
| ircamera_gray_t | 0 for disabled, 1 for enabled |
| beeper_mute | 0 for disabled, 1 for enabled |
| away_entry_delay | 0, 10, 20, 30, 60, 120, 180, 240 |
| away_exit_delay | 30, 60, 120, 180, 240 |
| home_entry_delay | 0, 10, 20, 30, 60, 120, 180, 240 |
| home_exit_delay | 0, 10, 20, 30, 60, 120, 180, 240 |
| door_chime | none, normal, loud |
| warning_beep | none, normal, loud |
| entry_beep_away | none, normal, loud |
| exit_beep_away | none, normal, loud |
| entry_beep_home | none, normal, loud |
| exit_beep_home | none, normal, loud |
| confirm_snd | none, normal, loud |
| alarm_len | 0, 60, 120, 180, 240, 300, 360, 420, 480, 540, 600, 660, 720, 780, 840, 900 |
| final_beep | 0, 3, 4, 5, 6, 7, 8, 9, 10 |
| entry | (Siren) 0 for disabled, 1 for enabled |
| tamper | (Siren) 0 for disabled, 1 for enabled |
| confirm | (Siren) 0 for disabled, 1 for enabled |
