Incomplete bit code when uploading to app store #61

superandrew213 · 2016-09-05T08:56:50Z

Version

Tell us which versions you are using:

react-native-image-crop-picker v0.8.0
react-native v0.32.0

Steps to reproduce

Archive and upload to app store

Attachments

superandrew213 · 2016-09-05T09:08:26Z

Getting this now after cleaning, restarting, reinstalling, etc

ivpusic · 2016-09-05T11:28:08Z

you are getting this error because pre-built frameworks are built for simulator and device ARCHs. This is good for development because you don't have to worry about supported arch when building and running on different platforms.

Before uploading to appstore, you have to strip away simulator platforms, and then use stripped versions of frameworks instead of current ones.

You can also remove current pre-built libraries for embedded binaries, and add the ones from Libraries/imageCropPicker/Libraries/XXX/Product/XXX.framework which will be there after you build project for specific platform.

Mentioum · 2016-09-05T13:10:23Z

@ivpusic could you give a step by step for this process as I'm having real trouble getting rid of this error. It's definitely due to a misunderstanding of mine of how xcode works?

ivpusic · 2016-09-05T16:21:48Z

then probably latter will be easier for you.

go to project General tab, scroll down to Embedded binaries. You will see that there are two pre-built frameworks. You can remove them, build project for Device => this will produce Frameworks built for Device platform. Click + under Embedded binaries, and now you can add these two frameworks.

Later probably you will want to switch back to pre-built frameworks because it is easier during development.

superandrew213 · 2016-09-06T02:20:52Z

@ivpusic I'm still getting the same error if I do that.

superandrew213 · 2016-09-06T03:31:38Z

This is what I did:

Completely remove react-native-image-crop-picker
Install and link react-native-image-crop-picker
Build for "Generic iOS Device"
Add the two frameworks from the libraries folder to "Embedded Binaries"
Archive and upload

Before upload starts I get the same error in the first screenshot

ivpusic · 2016-09-06T07:00:18Z

can you go to Project -> Build Settings -> Enable Bitcode. Is it yes or no?

superandrew213 · 2016-09-06T07:03:22Z

Yes, it's enabled.

ivpusic · 2016-09-06T08:13:56Z

hm, then would be cool if you can investigate what is happening. Maybe try flags/options from this link http://stackoverflow.com/questions/34959767/whats-the-difference-between-fembed-bitcode-and-bitcode-generation-mode. Probably for some reason bitcode is not included in built frameworks, and as you said your app has it, which is causing this incompatibility.

You can experiment by editing build options of each framework, build it and then link it with your app. Please keep me posted about progress here.

superandrew213 · 2016-09-06T08:18:29Z

Have you been able to upload to itunesconnect yet?

ivpusic · 2016-09-06T08:46:16Z

nope, my personal project is still in development, so I didnt try upload yet.

superandrew213 · 2016-09-06T10:13:59Z

Adding -fembed-bitcode flag to frameworks fixes it.

ivpusic · 2016-09-06T10:49:03Z

great. will release new version with this fix.

ivpusic · 2016-09-06T18:39:51Z

@superandrew213 released in 0.8.1 https://github.com/ivpusic/react-native-image-crop-picker/releases/tag/v0.8.1

superandrew213 · 2016-09-06T22:03:26Z

Great! thanks

parkerdan · 2016-09-07T15:57:50Z

@superandrew213, Have you released anything with this package? This package works great on the simulator, but I put something on TestFlight and memory usage explodes when selecting photos with this...

ivpusic · 2016-09-07T17:22:15Z

@parkerdan what "memory usage explodes" means in your context? How much memory usage is increased? In my testings when running on device memory usage is ok. "Exploding" comes if I send base64 image data over the RN bridge, which is something you should generally avoid with react-native.

parkerdan · 2016-09-07T17:44:23Z

I love your work on being able to select multiple photos, and everything is great until the app is on the phone via TestFlight.

My app is 80mb according to iOS Settings->General->Storage->Manage Storage. My app got to 160mb after selecting a few photos with your package. When I changed to react-native-image-picker, and added the same photos to the app, the memory was at 85mb.

parkerdan · 2016-09-07T18:03:56Z

Yes, i"m including base64.

parkerdan · 2016-09-07T18:06:01Z

@ivpusic, but I also get base64 from the other package without the memory increase....

ivpusic · 2016-09-07T18:11:39Z

sorry, I thought you were talking about RAM usage, but you are talking about disk usage? in that case reason why memory increases is because files are written to tmp location which is cleaned up automatically at some point. Maybe would be a good idea to export some cleanup function, so users can call it once they don't need file(s) anymore.

parkerdan · 2016-09-07T18:21:24Z

I would love a clean-up function. Any idea how to go about that?

ivpusic · 2016-09-07T19:47:18Z

@parkerdan here you go https://github.com/ivpusic/react-native-image-crop-picker/releases/tag/v0.8.2

superandrew213 · 2016-09-07T23:26:00Z

@parkerdan I delete images in temp folder as soon as I am done with them. You can use react-native-fs for that RNFS.unlink(path).

@ivpusic it would be better to let react-native-fs handle that

parkerdan · 2016-09-07T23:28:12Z

@superandrew213, Thanks for the tip

ivpusic · 2016-09-08T06:41:28Z

@superandrew213 let't keep this option as well, because many people doesn't use fs package

playing · 2016-09-13T07:11:34Z

@ivpusic when add framework into Embedded Binaries, you can use add other and add file in node_modules/react-native-crop-picker/ios/imageCropPickerSDK/xxx.framework, so you dont need to remove and add framework every time.

roycclu · 2018-01-13T17:17:52Z

hello,
I used cocoapods, and did according to the instruction. Remove pre-built from embedded binaries, and then added them in from Libraries/imageCropPicker/Libraries//Products/
But still get the following error:
" UserInfo={NSLocalizedDescription=Failed to verify bitcode in QBImagePicker.framework/QBImagePicker: error: Cannot extract bundle from /var/folders/wf/wxwbrgls6fg49tyhp_dx35cc0000gn/T/XcodeDistPipeline.HKc/Root/Payload/timecapsule.app/ImageCropPickerSDK/QBImagePicker.framework/QBImagePicker (x86_64)
Any idea how to solve this?

roycclu · 2018-01-13T17:22:28Z

@ShuBuShao

Also tried toggling the Enable Bitcode to Yes, and then to No.
Still getting this error:

Failed to verify bitcode in QBImagePicker.framework/QBImagePicker

Any other suggestions?

bubuzzz · 2018-02-19T02:45:05Z

I also have this issue with the latest version. Have no idea how to resolve it until I manually delete all the binary files, clean, clean build folder and archive project again. Finally it worked.

In general, if some one can make it work but some one cannot make it work, then first thing should come up is try to clean the project as much as we can. This is a good experience

canastro · 2018-05-14T20:49:57Z

I already have everything working properly on my dev environment. Now I want to upload it to testflight. I have a circle ci that will be triggered on push to master that will build the ipa and push it to testflight.

In order to not have to change my project manually every time I want to push to master (and trigger circle ci), I need to be able to delete these files before I start to build the IPA.

If you are using pre-built frameworks from ios/ImageCropPickerSDK, then before deploying app to production you should strip off simulator ARCHs from these,

This is not very clear for me. Which are the files I need to delete?

EDIT:

@ivpusic Is it something like this: https://github.com/oney/react-native-webrtc/blob/master/Documentation/iOSInstallation.md#appendix-b---apple-store-submission ? Could we benefit to a script similar to the one in react-native-webrtc?

Based on that script I created this: https://gist.github.com/canastro/e8cf409f9a241cfb1d0763cdb66f3dc8 and now I run:

node scripts/ios_arch.js --extract && node scripts/ios_arch.js --device && node scripts/ios_arch.js --clear

And then:

bundle exec fastlane ios build match_type:appstore export_method:app-store ipa_name:xxxx.ipa

Now the error I have is:

ERROR ITMS-90685: "CFBundleIdentifier Collision. 
There is more than one bundle with the CFBundleIdentifier value 'com.ruslanskorb.RSKImageCropper' under the iOS application 'xxxx.app'."

ERROR ITMS-90685: "CFBundleIdentifier Collision. 
There is more than one bundle with the CFBundleIdentifier value 'jp.questbeat.QBImagePicker' under the iOS application 'xxxx.app'."

Any tips on what I might be missing?

codetay · 2018-09-04T09:26:41Z

My problem was solved after i deleted the folder installed by the Post-install steps 2

mayankbaiswar-CSE · 2018-09-07T21:00:57Z

@canastro did you happen to solve "CFBundleIdentifier Collision"? I'm getting that too!

mdio · 2018-09-11T15:52:43Z

@mayankbaiswar-CSE I tried what @codetay suggested (removing the manually added reference to ImageCropPickerSDK in Xcode) and this solved the collision problem for me.

Also I took the script from https://github.com/oney/react-native-webrtc/blob/master/tools/ios_arch.js that @canastro mentioned and converted it into helper functions for fastlane.

DEPENDENCIES_TO_STRIP = ['RSKImageCropper', 'QBImagePicker']

def strip_simulator_archs()
  archs_to_keep = ['armv7', 'armv7s', 'arm64']

  DEPENDENCIES_TO_STRIP.each { |dependency|
    Dir.chdir("../node_modules/react-native-image-crop-picker/ios/ImageCropPickerSDK/#{dependency}.framework") do
      sh("cp #{dependency} /tmp/#{dependency}")

      archs_to_keep.each { |arch|
        sh("lipo -extract #{arch} #{dependency} -o #{dependency}-#{arch}")
      }
      createParameters = archs_to_keep.reduce('') { |total, arch| "#{total} #{dependency}-#{arch}" }
      sh("lipo -o #{dependency} -create#{createParameters}")
      sh("rm #{dependency}-*")
    end
  }
end

def restore_simulator_archs()
  DEPENDENCIES_TO_STRIP.each { |dependency|
    Dir.chdir("../node_modules/react-native-image-crop-picker/ios/ImageCropPickerSDK/#{dependency}.framework") do
      sh("mv /tmp/#{dependency} #{dependency}")
    end
  }
end

In our release lane, strip_simulator_archs is called before and restore_simulator_archs after gym.
That way you don't have to fiddle around to have both a working simulator build and one for TestFlight.

umut885 · 2018-09-15T15:02:05Z

Adding -fembed-bitcode flag to frameworks fixes it.

excuse me, where exactly i do have to put this flag? Could provide a detailed instruction?

This commit replaces react-native-image-picker in favor of react-native-image-crop-picker. It solves a few key issues like being able to - 1) Select multiple images 2) Being able to downsample image quality. See issue zulip#2749 3) Being able to scale down images. 4) Being faster at processing images. The removal of react-native-image-picker was done by: 1) Removing dependency from yarn 2) Running react-native unlink react-native-image-picker 3) Checking the initial commit and removing any code that may not be covered by unlink. For reference the initial commit that introduced changes was 515436a. The addition of react-native-image-crop-picker is done by following the installation instructions at https://github.com/ivpusic/react-native-image-crop-picker/blob/07d321e3bc279b0ad218817245264cda6a7c77cb/README.md This involved: 1) Adding the dependency via yarn 2) Running react-native link react-native-image-crop-picker 3) Adding the frameworks under embedded binaries as described by this comment ivpusic/react-native-image-crop-picker#61 (comment) and also under the "Manual" section of the PostInstall steps. Note: We are ignoring a few of the PostInstall steps described in the Readme namely: 1) Changing the deployment target to 8.0 - We already have a higher target set. 2) The steps described in "To localizate the camera / gallery text buttons" - I dont believe this is required and the instructions seem vague. 3) Adding "useSupportLibrary" as described in a previous commit - This is required for cropping images and we don't have that feature enabled currently. When we enable that feature we will want to add this as well. Note: We want to test this commit is working by archiving the project and uploading to TestFlight.

prasad456 · 2019-01-09T08:29:35Z

can you go to Project -> Build Settings -> Enable Bitcode. Is it yes or no?

YES

mieszko4 · 2019-01-19T11:06:54Z

I am a bit confused about Production build step for non-pod installation.

I followed all steps for non-pod including post-install (adding RSKImageCropper.framework and QBImagePicker.framework manually) and I run it in simulator - all worked well.
Then I archived the apk and sent it to testflight, installed it from testflight - that also all worked well.

I am using xcode 10, RN 0.57, deployment target 9.0, iOS 12.1.2 and no pods.
I use [email protected] to take a picture and to select from library then I send its base64 to my server.

Is striping away simulator platforms still a required step?

douglasjunior · 2019-01-22T12:57:26Z

I also can't use cocoapods, so here is the setup process that worked for me in dev and prod.

Install the react-native-image-crop-picker
react-native link react-native-image-crop-picker
Select Generic iOS Device as a target
Menu Product -> Clean and then Product -> Build.
Go to the folder /Users/<user>/Library/Developer/Xcode/DerivedData/<app-name>/Build/Products/Debug-iphoneos.
Copy the QBImagePicker.framework and RSKImageCropper.framework to your <project>/ios folder, and then drag and drop both from <project>/ios to Embedded binaries.
Archive and Upload 🎉

paolospag · 2019-01-29T08:34:38Z

@douglasjunior @mieszko4 @ivpusic
So, having followed the installation step without Cocapoads (manual installation), can I avoid the production step?

With QBImagePicker.framework and RSKImageCropper.framework in Embedded Binaries and with Debug scheme my app works well, but I'm uploading it on TestFlight and I would like to understand if I have to do production step or not.

douglasjunior · 2019-01-29T10:12:49Z

Following my steps you are ready for development and production.

paolospag · 2019-01-29T10:16:24Z

@douglasjunior I do not understand what you do exactly between point 5 and point 6

douglasjunior · 2019-01-29T10:20:37Z

After step 4 the compiled frameworks are generated on step 5 folder. You need to copy them to your <project>/ios folder, and then link both as Embedded binaries. What you do not understand?

mieszko4 · 2019-01-29T12:57:32Z

That's the point - I did not embed binaries from derived folder (i.e. I did not do steps 5 and 6).
I just followed the initial instructions on README.md and it worked for me both on simulator and testflight and I am just confused why. I will recheck this.

mieszko4 · 2019-01-29T19:59:00Z

Please mind I am not an expert in iOS stuff.
I rechecked this and I did:

rm -fr /Users/mieszko4/Library/Developer/Xcode/DerivedData
rm -fr ./node_modules
npm ci
I opened the project (I have no cocoapod) in xcode, I set target as Generic iOS Device
I cleaned the project
I went to General tab and under Embeded Binaries I pressed + and I chose RSKImageCropper.framework and QBImagePicker.framework (they were automatically expanded and located under Libraries/imageCropPicker/Libraries/_framework_name_.xcodeproj/Products/_framework_name_.framework)

After adding them I've noticed that their paths are taken from DerivedData folder, i.e. /Users/mieszko4/Library/Developer/Xcode/DerivedData/NAMEOFPROJECT-gyhgygejsxewwjakamghtszkqurn/Build/Products/Debug-iphoneos/QBImagePicker.framework. This path points to no file though.

I archived the app and sent to the store - no problem.
I installed the app on Testflight and it is all good.

After that I changed target to iPhone XR, I built it and run on simulator - again it is all good.

This is why I am confused why there is additional step for production only as it seems that the post-install ios Step 2 automatically does what needs to be done for production.

paolospag · 2019-02-08T13:30:36Z

@mieszko4 oh sure, I'm little bit confused.
I probably didn't do all your steps, but having installed everything manually (without Cocoapods), I fully followed all the steps explained in the section Post-install steps (https://github.com/ivpusic/react-native-image-crop-picker#post-install-steps) for iOS and it works fine, both debug and release. I also tried with TestFlight.

I also find RSKImageCropper.framework and QBImagePicker.framework under Libraries/imageCropPicker/Libraries/_framework_name_.xcodeproj/Products/_framework_name_.framework (automatically located here).

I have this situation in Xcode:

So, why does it work anyway?
Is Production build (https://github.com/ivpusic/react-native-image-crop-picker#production-build) still necessary? @ivpusic

douglasjunior · 2019-02-08T13:46:04Z

@paolospag you need to copy and paste the compiled frameworks to your <project>/ios, and then link the frameworks from <project>/ios to Embbeded binaries.

liuyunzyj · 2019-07-25T02:19:06Z

@douglasjunior Why is mine still not working? Is there any missing steps?

liuyunzyj · 2019-07-25T02:43:56Z

@danilobuerger

sivasankarchimata · 2019-11-09T10:10:56Z

Can i use react-native-image-crop-picker with expo ,

balwinder4264 · 2020-03-04T04:16:52Z

img is file
const { stream, filename } = await img;

stream is undefined but showing filename.
Anybody know how to get stream from image

FrontEnd :ReactNative
Backend :Nodejs Apollo Boost

ivpusic mentioned this issue Sep 5, 2016

Failed to verify bitcode in QBImagePicker.framework/QBImagePicker #58

Closed

ivpusic closed this as completed Sep 6, 2016

ivpusic mentioned this issue Sep 18, 2016

RSKImageCropper.framework contains unsupported architectures '[x86_64, i386]' #76

Closed

mdio mentioned this issue Sep 11, 2018

Remove problematic step from manual post-install steps for iOS #821

Merged

DareFail mentioned this issue Nov 14, 2018

RSKImageCropper.framework and QBImagePicker.framework contains unsupported architectures with CocoaPods #880

Open

DISKONEKTeD mentioned this issue Jan 3, 2019

Don't Use This Package If Not Using CocoaPods For iOS #909

Closed

sergeyshpadyrev mentioned this issue Jan 20, 2019

Code signing "QBImagePicker.framework" failed #902

Closed

ivpusic mentioned this issue Oct 3, 2019

Failed to verify bitcode in QBImagePicker.framework #1119

Closed

Incomplete bit code when uploading to app store #61

Incomplete bit code when uploading to app store #61

Comments

superandrew213 commented Sep 5, 2016

Version

Steps to reproduce

Attachments

superandrew213 commented Sep 5, 2016

ivpusic commented Sep 5, 2016

Mentioum commented Sep 5, 2016 • edited Loading

ivpusic commented Sep 5, 2016

superandrew213 commented Sep 6, 2016

superandrew213 commented Sep 6, 2016

ivpusic commented Sep 6, 2016

superandrew213 commented Sep 6, 2016

ivpusic commented Sep 6, 2016

superandrew213 commented Sep 6, 2016

ivpusic commented Sep 6, 2016

superandrew213 commented Sep 6, 2016

ivpusic commented Sep 6, 2016

ivpusic commented Sep 6, 2016

superandrew213 commented Sep 6, 2016

parkerdan commented Sep 7, 2016

ivpusic commented Sep 7, 2016

parkerdan commented Sep 7, 2016

parkerdan commented Sep 7, 2016

parkerdan commented Sep 7, 2016

ivpusic commented Sep 7, 2016

parkerdan commented Sep 7, 2016

ivpusic commented Sep 7, 2016

superandrew213 commented Sep 7, 2016

parkerdan commented Sep 7, 2016

ivpusic commented Sep 8, 2016

playing commented Sep 13, 2016

roycclu commented Jan 13, 2018

roycclu commented Jan 13, 2018

bubuzzz commented Feb 19, 2018 • edited Loading

canastro commented May 14, 2018 • edited Loading

codetay commented Sep 4, 2018

mayankbaiswar-CSE commented Sep 7, 2018

mdio commented Sep 11, 2018

umut885 commented Sep 15, 2018

prasad456 commented Jan 9, 2019

mieszko4 commented Jan 19, 2019

douglasjunior commented Jan 22, 2019 • edited Loading

paolospag commented Jan 29, 2019 • edited Loading

douglasjunior commented Jan 29, 2019

paolospag commented Jan 29, 2019

douglasjunior commented Jan 29, 2019 • edited Loading

mieszko4 commented Jan 29, 2019

mieszko4 commented Jan 29, 2019

paolospag commented Feb 8, 2019

douglasjunior commented Feb 8, 2019

liuyunzyj commented Jul 25, 2019

liuyunzyj commented Jul 25, 2019

sivasankarchimata commented Nov 9, 2019

balwinder4264 commented Mar 4, 2020

Mentioum commented Sep 5, 2016 •

edited

Loading

bubuzzz commented Feb 19, 2018 •

edited

Loading

canastro commented May 14, 2018 •

edited

Loading

douglasjunior commented Jan 22, 2019 •

edited

Loading

paolospag commented Jan 29, 2019 •

edited

Loading

douglasjunior commented Jan 29, 2019 •

edited

Loading