docs: decapitalize IPFS where possible

Tried to check all instances of IPFS and make sure they werent referring to the CLI tool. See #2910.

License: MIT
Signed-off-by: Richard Littauer <[email protected]>

cmd/ipfs/daemon.go

@@ -48,9 +48,9 @@ const (
 
 var daemonCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Run a network-connected IPFS node.",
+		Tagline: "Run a network-connected ipfs node.",
 		ShortDescription: `
-'ipfs daemon' runs a persistent IPFS daemon that can serve commands
+'ipfs daemon' runs a persistent ipfs daemon that can serve commands
 over the network. Most applications that use IPFS will do so by
 communicating with a daemon over the HTTP API. While the daemon is
 running, calls to 'ipfs' commands will be sent over the network to
@@ -81,7 +81,7 @@ make sure to protect the port as you would other services or database
 
 HTTP Headers
 
-IPFS supports passing arbitrary headers to the API and Gateway. You can
+ipfs supports passing arbitrary headers to the API and Gateway. You can
 do this by setting headers on the API.HTTPHeaders and Gateway.HTTPHeaders
 keys:
 
@@ -117,7 +117,7 @@ environment variable:
 
 DEPRECATION NOTICE
 
-Previously, IPFS used an environment variable as seen below:
+Previously, ipfs used an environment variable as seen below:
 
    export API_ORIGIN="http://localhost:8888/"
 
@@ -128,11 +128,11 @@ Headers.
 	},
 
 	Options: []cmds.Option{
-		cmds.BoolOption(initOptionKwd, "Initialize IPFS with default settings if not already initialized").Default(false),
+		cmds.BoolOption(initOptionKwd, "Initialize ipfs with default settings if not already initialized").Default(false),
 		cmds.StringOption(routingOptionKwd, "Overrides the routing option").Default("dht"),
-		cmds.BoolOption(mountKwd, "Mounts IPFS to the filesystem").Default(false),
+		cmds.BoolOption(mountKwd, "Mounts ipfs to the filesystem").Default(false),
 		cmds.BoolOption(writableKwd, "Enable writing objects (with POST, PUT and DELETE)").Default(false),
-		cmds.StringOption(ipfsMountKwd, "Path to the mountpoint for IPFS (if using --mount). Defaults to config setting."),
+		cmds.StringOption(ipfsMountKwd, "Path to the mountpoint for ipfs (if using --mount). Defaults to config setting."),
 		cmds.StringOption(ipnsMountKwd, "Path to the mountpoint for IPNS (if using --mount). Defaults to config setting."),
 		cmds.BoolOption(unrestrictedApiAccessKwd, "This option has no effect since v0.4.3").Default(false),
 		cmds.BoolOption(unencryptTransportKwd, "Disable transport encryption (for debugging protocols)").Default(false),
@@ -200,7 +200,7 @@ func daemonFunc(req cmds.Request, res cmds.Response) {
 
 	if initialize {
 
-		// now, FileExists is our best method of detecting whether IPFS is
+		// now, FileExists is our best method of detecting whether ipfs is
 		// configured. Consider moving this into a config helper method
 		// `IsInitialized` where the quality of the signal can be improved over
 		// time, and many call-sites can benefit.

cmd/ipfs/init.go

@@ -23,9 +23,9 @@ const (
 
 var initCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Initializes IPFS config file.",
+		Tagline: "Initializes ipfs config file.",
 		ShortDescription: `
-Initializes IPFS configuration files and generates a new keypair.
+Initializes ipfs configuration files and generates a new keypair.
 
 ipfs uses a repository in the local file system. By default, the repo is
 located at ~/.ipfs. To change the repo location, set the $IPFS_PATH

core/commands/add.go

@@ -61,7 +61,7 @@ You can now refer to the added file in a gateway, like so:
 	},
 
 	Arguments: []cmds.Argument{
-		cmds.FileArg("path", true, true, "The path to a file to be added to IPFS.").EnableRecursive().EnableStdin(),
+		cmds.FileArg("path", true, true, "The path to a file to be added to ipfs.").EnableRecursive().EnableStdin(),
 	},
 	Options: []cmds.Option{
 		cmds.OptionRecursivePath, // a builtin option that allows recursive paths (-r, --recursive)

core/commands/block.go

@@ -28,7 +28,7 @@ var BlockCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
 		Tagline: "Manipulate raw IPFS blocks.",
 		ShortDescription: `
-'ipfs block' is a plumbing command used to manipulate raw ipfs blocks.
+'ipfs block' is a plumbing command used to manipulate raw IPFS blocks.
 Reads from stdin or writes to stdout, and <key> is a base58 encoded
 multihash.
 `,
@@ -43,10 +43,10 @@ multihash.
 
 var blockStatCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Print information of a raw IPFS block.",
+		Tagline: "Print information of a raw ipfs block.",
 		ShortDescription: `
 'ipfs block stat' is a plumbing command for retrieving information
-on raw ipfs blocks. It outputs the following to stdout:
+on raw IPFS blocks. It outputs the following to stdout:
 
 	Key  - the base58 encoded multihash
 	Size - the size of the block in bytes
@@ -80,9 +80,9 @@ on raw ipfs blocks. It outputs the following to stdout:
 
 var blockGetCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Get a raw IPFS block.",
+		Tagline: "Get a raw ipfs block.",
 		ShortDescription: `
-'ipfs block get' is a plumbing command for retrieving raw ipfs blocks.
+'ipfs block get' is a plumbing command for retrieving raw IPFS blocks.
 It outputs to stdout, and <key> is a base58 encoded multihash.
 `,
 	},
@@ -103,9 +103,9 @@ It outputs to stdout, and <key> is a base58 encoded multihash.
 
 var blockPutCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Stores input as an IPFS block.",
+		Tagline: "Stores input as an ipfs block.",
 		ShortDescription: `
-'ipfs block put' is a plumbing command for storing raw ipfs blocks.
+'ipfs block put' is a plumbing command for storing raw IPFS blocks.
 It reads from stdin, and <key> is a base58 encoded multihash.
 `,
 	},

core/commands/config.go

@@ -24,15 +24,15 @@ type ConfigField struct {
 
 var ConfigCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Get and set IPFS config values.",
+		Tagline: "Get and set ipfs config values.",
 		ShortDescription: `
 'ipfs config' controls configuration variables. It works like 'git config'.
-The configuration values are stored in a config file inside your IPFS
+The configuration values are stored in a config file inside your ipfs
 repository.`,
 		LongDescription: `
 'ipfs config' controls configuration variables. It works
 much like 'git config'. The configuration values are stored in a config
-file inside your IPFS repository.
+file inside your ipfs repository.
 
 Examples:
 

core/commands/id.go

@@ -40,7 +40,7 @@ type IdOutput struct {
 
 var IDCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Show IPFS Node ID info.",
+		Tagline: "Show ipfs node id info.",
 		ShortDescription: `
 Prints out information about the specified peer.
 If no peer is specified, prints out information for local peers.

core/commands/mount_nofuse.go

@@ -9,7 +9,7 @@ import (
 
 var MountCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Mounts IPFS to the filesystem (disabled).",
+		Tagline: "Mounts ipfs to the filesystem (disabled).",
 		ShortDescription: `
 This version of ipfs is compiled without fuse support, which is required
 for mounting. If you'd like to be able to mount, please use a version of

core/commands/mount_unix.go

@@ -15,13 +15,13 @@ import (
 
 var MountCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Mounts IPFS to the filesystem (read-only).",
+		Tagline: "Mounts ipfs to the filesystem (read-only).",
 		Synopsis: `
 ipfs mount [-f <ipfs mount path>] [-n <ipns mount path>]
 `,
 		ShortDescription: `
 Mount ipfs at a read-only mountpoint on the OS (default: /ipfs and /ipns).
-All ipfs objects will be accessible under that directory. Note that the
+All IPFS objects will be accessible under that directory. Note that the
 root will not be listable, as it is virtual. Access known paths directly.
 
 You may have to create /ipfs and /ipns before using 'ipfs mount':
@@ -34,7 +34,7 @@ You may have to create /ipfs and /ipns before using 'ipfs mount':
 		LongDescription: `
 Mount ipfs at a read-only mountpoint on the OS. The default, /ipfs and /ipns,
 are set in the configutation file, but can be overriden by the options.
-All ipfs objects will be accessible under this directory. Note that the
+All IPFS objects will be accessible under this directory. Note that the
 root will not be listable, as it is virtual. Access known paths directly.
 
 You may have to create /ipfs and /ipns before using 'ipfs mount':
@@ -74,7 +74,7 @@ baz
 `,
 	},
 	Options: []cmds.Option{
-		cmds.StringOption("ipfs-path", "f", "The path where IPFS should be mounted."),
+		cmds.StringOption("ipfs-path", "f", "The path where ipfs should be mounted."),
 		cmds.StringOption("ipns-path", "n", "The path where IPNS should be mounted."),
 	},
 	Run: func(req cmds.Request, res cmds.Response) {

core/commands/object/diff.go

@@ -20,10 +20,10 @@ var ObjectDiffCmd = &cmds.Command{
 		Tagline: "Takes a diff of the two given objects.",
 		ShortDescription: `
 'ipfs object diff' is a command used to show the differences between
-two ipfs objects.`,
+two IPFS objects.`,
 		LongDescription: `
 'ipfs object diff' is a command used to show the differences between
-two ipfs objects.
+two IPFS objects.
 
 Example:
 

core/commands/object/object.go

@@ -43,7 +43,7 @@ type Object struct {
 
 var ObjectCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Interact with ipfs objects.",
+		Tagline: "Interact with IPFS objects.",
 		ShortDescription: `
 'ipfs object' is a plumbing command used to manipulate DAG objects
 directly.`,

core/commands/object/patch.go

@@ -109,9 +109,9 @@ the limit will not be respected by the network.
 
 var patchSetDataCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Set the data field of an ipfs object.",
+		Tagline: "Set the data field of an IPFS object.",
 		ShortDescription: `
-Set the data of an ipfs object from stdin or with the contents of a file.
+Set the data of an IPFS object from stdin or with the contents of a file.
 
 Example:
 

core/commands/publish.go

@@ -47,7 +47,7 @@ Publish an <ipfs-path> to another public key (not implemented):
 	},
 
 	Arguments: []cmds.Argument{
-		cmds.StringArg("ipfs-path", true, false, "IPFS path of the object to be published.").EnableStdin(),
+		cmds.StringArg("ipfs-path", true, false, "ipfs path of the object to be published.").EnableStdin(),
 	},
 	Options: []cmds.Option{
 		cmds.BoolOption("resolve", "Resolve given path before publishing.").Default(true),

core/commands/repo.go

@@ -20,7 +20,7 @@ type RepoVersion struct {
 
 var RepoCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Manipulate the IPFS repo.",
+		Tagline: "Manipulate the ipfs repo.",
 		ShortDescription: `
 'ipfs repo' is a plumbing command used to manipulate the repo.
 `,

core/commands/root.go

@@ -27,8 +27,8 @@ ipfs [<flags>] <command> [<arg>] ...
 BASIC COMMANDS
   init          Initialize ipfs local configuration
   add <path>    Add a file to ipfs
-  cat <ref>     Show ipfs object data
-  get <ref>     Download ipfs objects
+  cat <ref>     Show IPFS object data
+  get <ref>     Download IPFS objects
   ls <ref>      List links from an object
   refs <ref>    List hashes of links from an object
 

core/commands/tar.go

@@ -13,7 +13,7 @@ import (
 
 var TarCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Utility functions for tar files in IPFS.",
+		Tagline: "Utility functions for tar files in ipfs.",
 	},
 
 	Subcommands: map[string]*cmds.Command{
@@ -83,7 +83,7 @@ var tarCatCmd = &cmds.Command{
 	},
 
 	Arguments: []cmds.Argument{
-		cmds.StringArg("path", true, false, "IPFS path of archive to export.").EnableStdin(),
+		cmds.StringArg("path", true, false, "ipfs path of archive to export.").EnableStdin(),
 	},
 	Run: func(req cmds.Request, res cmds.Response) {
 		nd, err := req.InvocContext().GetNode()

core/commands/tour_test.go

@@ -13,7 +13,7 @@ func TestParseTourTemplate(t *testing.T) {
 		Content: tour.Content{
 			Title: "IPFS CLI test files",
 			Text: `
-Welcome to the IPFS test files
+Welcome to the ipfs test files
 This is where we test our beautiful command line interfaces
 		`,
 		},

core/commands/unixfs/unixfs.go

@@ -4,16 +4,16 @@ import cmds "github.com/ipfs/go-ipfs/commands"
 
 var UnixFSCmd = &cmds.Command{
 	Helptext: cmds.HelpText{
-		Tagline: "Interact with ipfs objects representing Unix filesystems.",
+		Tagline: "Interact with IPFS objects representing Unix filesystems.",
     Synopsis: "ipfs file <command>",
 		ShortDescription: `
 'ipfs file' provides a familiar interface to file systems represented
-by IPFS objects, which hides IPFS implementation details like layout
+by IPFS objects, which hides ipfs implementation details like layout
 objects (e.g. fanout and chunking).
 `,
     LongDescription: `
 'ipfs file' provides a familiar interface to file systems represented
-by IPFS objects, which hides IPFS implementation details like layout
+by IPFS objects, which hides ipfs implementation details like layout
 objects (e.g. fanout and chunking).
 `,
 	},

docs/implement-api-bindings.md

@@ -13,7 +13,7 @@ Sections:
 IPFS uses a set of type value that is useful to enumerate up front:
 
 - `<ipfs-path>` is unix-style path, beginning with `/ipfs/<hash>/...` or `/ipns/<hash>/...` or `/ipns/<domain>/...`.
-- `<hash>` is a base58 encoded [multihash](https://github.com/jbenet/multihash) (there are [many implementations](https://github.com/jbenet/multihash#implementations)). Usually the hash of an ipfs object (or merkle dag node).
+- `<hash>` is a base58 encoded [multihash](https://github.com/jbenet/multihash) (there are [many implementations](https://github.com/jbenet/multihash#implementations)). Usually the hash of an IPFS object (or merkle dag node).
 
 A note on streams: IPFS is a streaming protocol. Everything about it can be streamed. When importing files, API requests should aim to stream the data in, and handle back-pressure correctly, so that the IPFS node can handle it sequentially without too much memory pressure. (If using HTTP, this is typically handled for you by writes to the request body blocking.)
 

test/bench/bench_cli_ipfs_add/main.go

@@ -16,7 +16,7 @@ import (
 )
 
 var (
-	debug  = flag.Bool("debug", false, "direct IPFS output to console")
+	debug  = flag.Bool("debug", false, "direct ipfs output to console")
 	online = flag.Bool("online", false, "run the benchmarks with a running daemon")
 )