openpower-occ-control BRANCH=OP940 bump e768101a #9
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Matt Spinler <[email protected]>
|
not needed. already done. |
rfrandse
pushed a commit
that referenced
this pull request
Nov 30, 2021
Andrew Jeffery (19):
notify: Exit polling loop and clean up on SIGINT, SIGQUIT
williwakas: Remove redundant drive detection
platform: Extract poll() to lambdas in PolledDevicePresence
notify: Log about disabling sink before disarm()
platform: Return PolledDevicePresence to initial state on disarm()
notify: Only remove sinks that are still armed
notify: Disable sinks that cause a bind exception
sysfs: i2c: Delete the device associated with a failed driver probe
notify: Push device-specific exception handling details into platform
flett: Don't try to probe drive EEPROM
nisqually: Fix up Flett indexing
Merge pull request #7 from amboar/flett-indexing
sysfs: i2c: Fix structured data variable typo
sysfs: i2c: Fix device address formatting in log output
sysfs: i2c: Use SysfsI2CBus::releaseDevice() on probe failure
platform-fru-detect: Graceful handling of execution environments
Merge pull request #8 from amboar/execution-environments
environment: Replace unreliable simics probe
Merge pull request #9 from amboar/execution-environments-2
Change-Id: Ibe4fafbbab463d954328c7885dca0f4dd2a911ff
Signed-off-by: Andrew Jeffery <[email protected]>
rfrandse
pushed a commit
that referenced
this pull request
Feb 17, 2022
In this patch bumped the openpower-hw-isolation with below patches.
hw-isolation: Bumped 6552fde..a04f468:
- Ramesh Iyyar (4):
common: Implemented the FFDCFile class
common: Implemented the FFDCFiles class
event: Use D-Bus API instead of the phosphor-logging API
Merge pull request #9 from RameshIyyar/pel-with-traces into main
Signed-off-by: Ramesh Iyyar <[email protected]>
rfrandse
added a commit
that referenced
this pull request
Feb 17, 2022
…ba (#1623) chiragsibm (1): Restart dump-manager during offload failure (#9) Change-Id: I3c8c3d955df0dd77663be6e15ec125d188617579
rfrandse
added a commit
that referenced
this pull request
Feb 17, 2022
Dhruvaraj S (1): Handle dump create errors (#9) Change-Id: I523138984ca94821dfd20957e1a0f42d34a8a712
rfrandse
added a commit
that referenced
this pull request
Feb 17, 2022
…8234a1c (#1767) * ibm-acf: downstream srcrev bump 4b3c9a2380..28336f8ef0 Noah Brewer (2): Add option to build static cli tool (#8) Add support for backup production key (#10) Matthew Vaught (2): Remove unused signature validation function (#9) Add support for ACF expiration dates up to 9999-12-31 (#12) Change-Id: I1910e922dec500a216af238cdda2cd7cb1ca887a * ibm-acf: downstream srcrev bump 28336f8ef0..8bb8234a1c Reed Frandsen (1): Revert "Remove unused signature validation function (#9)" Joseph Reynolds (1): Read fieldmode via command (#13) Change-Id: If80e89b5171c7ea85d9d35633a353f2098bef3fe
rfrandse
added a commit
that referenced
this pull request
Apr 29, 2022
… (#2113) Andrew Geissler (2): ensure bmc-state-manager stays in quiesce state generate bmc dump on monitored systemd target fail Mike Capps (1): Set Critical severity for Blackout errors Reed Frandsen (1): Merge pull request #9 from geissonator/032522-upstream-rebase Change-Id: I4c6436f3e62812598418d8b111fab903455850a6
rfrandse
added a commit
that referenced
this pull request
May 16, 2022
…a0..1678836246 (#2407) * phosphor-inventory-manager: downstream srcrev bump 6554fb5c04..383059da8f Reed Frandsen (1): sdbusplus: object: don't use 'bool' argument constructor (#8) Matt Spinler (1): Merge pull request #6 from Alpana07/1020 Alpana Kumari (1): PIM: Support deleteObject Change-Id: I236e81c32159ba9224e8aa6b9cf7de86dd76ccb3 * phosphor-inventory-manager: downstream srcrev bump 383059da8f..57d9a306a0 PriyangaRamasamy (1): Do not clear fault leds during warm reboot (#7) Reed Frandsen (1): Revert "PIM: Support deleteObject" (#9) Change-Id: I44fa34899171987dc3e2c45e97f81ebab81c0b12 * phosphor-inventory-manager: downstream srcrev bump 57d9a306a0..1678836246 Sunny Srivastava (1): Pick up Control Host interface (#10) Change-Id: I66202b06acd5fa71d3429aaa7bd8efa80acba556
rfrandse
added a commit
that referenced
this pull request
May 24, 2022
Matt Spinler (11): Add peltool to README Merge pull request #5 from spinler/peltool Handle hostboot SRCs within BMC PELs peltool: (non)serviceable PEL skipping peltool: Use procedure desc plugins Merge pull request #6 from spinler/hb_ti_src peltool: Add BMC maint procedure descriptions Check for package version from env var Merge pull request #7 from spinler/serviceable Merge pull request #8 from spinler/proc_descriptions Merge pull request #9 from spinler/peltool_version Change-Id: I5ef12c83c0726a3a4e54739fefe7b5a60f20a4b3
anoo1
added a commit
to anoo1/openbmc-1
that referenced
this pull request
Jun 3, 2022
Mike Capps (1): monitor: add journal entries to fan PELs Matt Spinler (5): monitor:configs:rainier-4u: EPOW config changes Merge pull request ibm-openbmc#7 from spinler/rainier-4u-1020 control:ibm,everest: Cutoff temp updates Merge pull request ibm-openbmc#8 from spinler/everest-updates Merge pull request ibm-openbmc#9 from spinler/journal-pel Change-Id: I1d1c6c77861c32cc03565a1db25bca6ac5e66bda
rfrandse
pushed a commit
to rfrandse/openbmc-1
that referenced
this pull request
Jul 18, 2022
…(#2536) b'Mike Capps' (1): monitor: add journal entries to fan PELs b'Matt Spinler' (1): Merge pull request ibm-openbmc#9 from spinler/journal-pel Co-authored-by: zamiseck <[email protected]>
rfrandse
pushed a commit
to rfrandse/openbmc-1
that referenced
this pull request
Jul 18, 2022
…(#2536) b'Mike Capps' (1): monitor: add journal entries to fan PELs b'Matt Spinler' (1): Merge pull request ibm-openbmc#9 from spinler/journal-pel Co-authored-by: zamiseck <[email protected]>
rfrandse
pushed a commit
that referenced
this pull request
Jul 18, 2022
…(#2536) b'Mike Capps' (1): monitor: add journal entries to fan PELs b'Matt Spinler' (1): Merge pull request #9 from spinler/journal-pel Co-authored-by: zamiseck <[email protected]>
rfrandse
pushed a commit
that referenced
this pull request
Oct 26, 2022
…(#2536) b'Mike Capps' (1): monitor: add journal entries to fan PELs b'Matt Spinler' (1): Merge pull request #9 from spinler/journal-pel Co-authored-by: zamiseck <[email protected]>
anoo1
pushed a commit
to anoo1/openbmc-1
that referenced
this pull request
Oct 28, 2022
Andrew Jeffery (19):
notify: Exit polling loop and clean up on SIGINT, SIGQUIT
williwakas: Remove redundant drive detection
platform: Extract poll() to lambdas in PolledDevicePresence
notify: Log about disabling sink before disarm()
platform: Return PolledDevicePresence to initial state on disarm()
notify: Only remove sinks that are still armed
notify: Disable sinks that cause a bind exception
sysfs: i2c: Delete the device associated with a failed driver probe
notify: Push device-specific exception handling details into platform
flett: Don't try to probe drive EEPROM
nisqually: Fix up Flett indexing
Merge pull request ibm-openbmc#7 from amboar/flett-indexing
sysfs: i2c: Fix structured data variable typo
sysfs: i2c: Fix device address formatting in log output
sysfs: i2c: Use SysfsI2CBus::releaseDevice() on probe failure
platform-fru-detect: Graceful handling of execution environments
Merge pull request ibm-openbmc#8 from amboar/execution-environments
environment: Replace unreliable simics probe
Merge pull request ibm-openbmc#9 from amboar/execution-environments-2
Change-Id: Ibe4fafbbab463d954328c7885dca0f4dd2a911ff
Signed-off-by: Andrew Jeffery <[email protected]>
rfrandse
added a commit
that referenced
this pull request
Nov 3, 2022
sandeepasingh116 (15): Add new toggles on CM page (#3) Changed connection status logic for Hypervisor console (#6) Remove dump download option from overview page (#9) Add text on user management page (#8) Rename the save setting button (#20) Add success toast (#18) Fix network eth1 error (#21) Disable date and time page (#24) Update password helptext (#19) Add info tooltip to frequency cap (#25) Read only user will not be able to toggle switches (#28) Make filters translatable (#33) Fix translations of vet capabilities (#35) fix english texts containing links (#38) Remove service login label for read only user (#45) Sandeepa Singh (9): Update Automatic helptext (#340) Grey out toggle when DHCP is disabled (#338) Disable delete when system is powered on (#327) Renamed added optimization page (#346) Fix deconfiguration record translation bug (#360) Fix power page translation bug (#361) Operating mode is translatable now (#363) Fix user management page translation bugs (#365) Fix server power ops translation bugs (#359) A Nikhil (4): PCIe topology performance improved (#337) AIX/LINUX and IBM i partition are only for non-HMC manage system (#318) Severity values is now translatable (#357) Enabled value taken from translation file (#362) Kenneth Fullbright (4): Created real time indicator postCodeValue filter (#302) Fixed Deconfig table download additional data button (#328) Changed page "Lateral cast out" to "Added optimization" (#341) Added notices page (#336) Nikhil Ashoka (26): pdated the text of server power ops documentation (#7) Displaying Sensors table one row at a time (#11) NTP server duplicate entry is not accepted (#4) Fabric Adapters Info in Inventory page (#12) Fixed Secure LDAP using SSL checkbox value (#2) Added progress bar for activate access key (#1) Error message displayed if fails to authenticate the user (#10) Memory page made HMC-managed independent (#15) Sorting fixed for status (#17) Sensors table now updating on refresh (#22) Secure LDAP is disabled when LDAP authentication disables (#23) Removed Service consoles page for read-only users (#14) Additional message added on Disable SSH (#30) Default partition value taken from translation file (#36) Updated password Max Limit (#26) New Error message displayed if fails to authenticate the user (#27) Added Status and roles values to the translation file (#31) Title translation (#34) Power values added to translation file (#32) Health and Date format taken from translation file (#37) Added possible property values in translation file (#39) Displaying System Anchor value (#40) Added Info tooltip to VirtualTPM (#47) Added max limit based on selected user (#46) Refresh only once after login (#42) Lamp test switch disabled once ON (#48) Change-Id: I1b9ec6fb45503c445cb533a6043f4b81fa4bdf38
rfrandse
added a commit
that referenced
this pull request
Jan 3, 2023
Alexander Filippov (1): UserMgr: Fix the privilege determination Nan Zhou (19): RemoveStringFromCSV: add unit test PamModuleArgValue: add unit test coverage user exist: simplify expression, add unit test name constraint check: add unit tests user add/delete: add unit tests ThrowForInvalidPrivilege: add unit test ThrowForInvalidGroups: add unit test renameUser: add unit test updateGroupsAndPriv: fix bugs and add tests user_mgr: move constructor codes to separate func MinPasswordLength: add unit test rememberOldPasswordTimes: add unit test MaxLoginAttemptBeforeLockout: add unit test accountUnlockTimeout: add unit test userEnable: fix bug and add unit test userLockedForFailedAttempt: add unit test User manager: implement dummy group APIs user manager test: remove no-access Add Nan Zhou as a reviewer Asmitha Karunanithi (1): Remove support for priv-noaccess role Tang Yiwei (1): Change /bin/nologin to /sbin/nologin Reed Frandsen (1): Merge pull request #19 from anoo1/1050-ibm Joseph Reynolds (7): Adapt to OpenBMC's Linux-PAM module changes Add priv-OemIBMServiceAgent Fix UserLockedForFailedAttempt for locked users (#8) Handle faillock for unknown user (#9) Restrict priv-oemibmserviceagent role (#11) restrict the priv-operator role (#14) Add ssh users to hostconsoleaccess group (#17) tomippolito (1): Update to fix SW544220 (#16) Change-Id: I8686b7b29b8bf31708543ea5d8f3035c768bdf8c
rfrandse
added a commit
that referenced
this pull request
Jan 3, 2023
Sandeepa Singh (47): Firmware-change (#66) Allow only tar file upload (#71) Hardware Deconfiguration Page (#84) Deconfig-Toggles (#110) Filter SNMP data (#112) Upload acf certificate on login page (#126) Hardware deconfiguration fix (#128) TFTP firmware update (#104) Add filter to remove absent dimms form GUI (#139) Add abiliy to sort hardware deconfig columns (#162) Add helptext for FQDN (#164) Add deconfiguration type as None (#163) Fix link to deconfiguration records (#155) Remove regex from firmware (#151) Add alert for HMC connection disconnect (#152) Update hardware deconfiguration per Demo feedback (#180) Remove Default option from Server power operations page (#188) reverting removal of Default partition environment dropdown (#190) Add Lateral cast out page (#177) fix toggle issue (#191) Add details on login page (#193) Remove TFTP server option from firmware page (#194) Real time post codes converted to ASCII (#207) fix TFTP bug (#213) Show/Hide ACF upload button (#214) Fix toggle issue (#219) Change the toggle text to configure/deconfigure (#223) Fix the sorting issue in progress logs (#240) Translate severity to fatal,predictive and manual (#235) Add Pel ID column on HW deconfiguration page (#244) Show FW_boot_side_current attribute value (#262) Added filter to remove 00000000 from post code table (#272) Fix toast msg for HW deconfiguration page (#251) Add location code of Deconfig records page (#293) Make memory page consistent (#308) Add pel id column (#332) Update service login condition (#326) Edit app nav and login file (#335) Update Automatic helptext (#340) Grey out toggle when DHCP is disabled (#338) Disable delete when system is powered on (#327) Renamed added optimization page (#346) Fix deconfiguration record translation bug (#360) Fix power page translation bug (#361) Operating mode is translatable now (#363) Fix user management page translation bugs (#365) Fix server power ops translation bugs (#359) Kenneth Fullbright (85): Removed irrelevant fields from the VET Capabilities table (#68) Update Firmware page interactions when system is powered on (#51) Updated CSR Modal & Service login Certificate Modal (#59) Removed OemIBMServiceAgent from Group Privilege list (#76) Updated Power saver modes descriptions (#83) Popup SOL Console (Host Console) not showing correct connection status (#79) Removed irrelevant fields from the VET Capabilities table (#93) Added Initiate Resource Dump Function (#103) Fixed password change/reset code for expired password (#125) Fixed global action vuex error getUsers (#120) Fixed 'Promise.all' related errors on Overview (#119) Renamed "Serial over LAN (SOL) console" page (#54) Fixed event log table to be fully responsive (#122) Prevent service user password change (#88) Turned dumps PHYP alert into a toast (#140) Repaired Service login consoles links in the navbar (#145) Removed LDAP from navigation on non admin role accounts (#108) Updated the link to consoles and other nav related items Refactored Power page and power page related things (#109) Added Power restore policy missing alert on operating mode manual (#147) Made non-service roles not pass default password for resource dumps (#135) Fixed BMC Hypervisor console switch (#159) Enhanced user creation and current user failed message for password change (#81) Fixed translation double key error (#146) Removed service privilege option from edit user and add user (#161) Enhanced resource dump error messages (#168) Refactored Power page code for efficiency and clarity (#158) Fixed init system dump from resource dump (#136) Added toast for invalid privilege (#172) Fixed Service consoles (#176) Fix user management delete table action (#179) Fixed service account resource dumps password field to allow any string (#183) Fixed Idle power saving missing reset button option (#184) Removed lower and upper limit and warning sensors (#186) Fixed missing fields for add user on user modal (#185) Fixed maximum amount of users toast error (#196) Fixed delete and replace function in Certificates table (#197) Fixed navbar missing error (#206) Fixed popup BMC and Hypervisor consoles. (#205) Fixed init system dump PHYP in standby check error (#204) Fixed closing console conntections. (#220) Fixed upload certificate button not being disabled on max certificates (#224) Added info tool tips on password changing fields. (#225) Removed operator role from add role group modal (#229) [SW550540] Removed Operator and NoAccess roles from desciption table (#228) [SW550558] Fixed proxy logout error (#226) Created info icon for enhanced information about power consumption (#232) Fixed some tables not being fully responsive (#222) Set autocomplete option to off for password fields (#231) Added dump being offloaded warning for reboot and shutdown (#241) Fixed system dump error messages (#238) Fixed factory reset to default code (#243) Changed OemIBMServiceAgent to ServiceAgent (#261) Add safe mode to user interface (#250) Fixed fresh install set password and login error (#263) Fixed DHCP delete button not disabled (#273) Removed unsupported ServiceAgent group from LDAP group privilege modal (#268) Fixed Zombie state when factory resetting (#270) Fixed unauthorized error toast on page loading (#267) Fixed firmware swapping confusion (#271) Fixed console connection indicators (#275) Fixed account polocy settings displaying not updated info on refresh (#276) Fixed running and backup image info render problem (#287) Fixed event logs not updating upon delete all button (#290) Fixed account policy radio buttons (#289) Fixed secure LDAP checkbox not showing correct values (#291) Fixed firmware update function (#296) Fixed JSON.parse error from localStorage (#298) Fixed factory reset function to be fully async (#306) Removed host console access from ReadOnly roles (#307) Fixed SRC Details not showing on non manual records (#300) Fixed page memory validation error (#313) Fixed location code not showing on Deconfiguration records table (#317) Disabled users from changing username on user management table (#321) Added Location codes for TPM (#324) Fixed console indicators not updating status (#304) Added Location codes for TPM (#325) Made more meaningful toasts (#314) Fixed manage access keys hyperlink being disabled problems on Firmware page (#322) Fixed asset tag info not showing up in modal after app refresh and tag update (#333) Removed hashes from files (#334) Created real time indicator postCodeValue filter (#302) Fixed Deconfig table download additional data button (#328) Changed page "Lateral cast out" to "Added optimization" (#341) Added notices page (#336) A Nikhil (47): Update Inventory DIMM table (#74) Update Inventory Assemblies table (#87) Update Inventory Processors table (#86) Incorrect Power mode value (#89) Dumps available on BMC are not displayed on BMC-GUI (#72) Components on the hardware page not in order (#101) No values populated for licensed and configured cores (#91) Update GUI as IBM (#116) Rename Update Firmware access key (#117) Health and state field of assembly components is missing in inventory page (#99) Event logs add missing information (#111) GUI has no way to turn off System attention LED (#129) Event log does not show information for service (#133) GUI missing detailed COD (#124) Rename count in system table (#149) FCO page accepts value greater than the number of licensed cores (#142) Part number field is showing spare part number value (#165) Wrong lable on SRC for logs (#156) Inventory and LEDs page has two system entries (#137) Add toggle to enable/disable the secure version lock in (#167) Factory reset option should only be provided at power off (#174) Health in critical state after marking critical errors as resolved (#189) Concurrent maintenance Page (#202) Download implementation in Event logs (#192) Missing host USB enable/disable (#239) Prevent system power on when BMC is not in Ready state (#227) Adding mex chassis Info (#233) Mex IO enclosure firmware version not displayed (#265) PCIe Hardware Topology (#181) Warning in PcieTopology.vue (#282) Pcie-topology and Inventory fixes (#288) Unable to edit group name in the Add Role group field. (#303) PCIe Topology Save changes (#309) Invalid range for I/O Adapter enlarged capacity (#311) Status for both system and chassis comes as absent at host power off state (#312) Status for system table should be Present (#320) Fixed Identify LED error in MEX chassis (#330) Assemblies section does not has search option in Inventory page (#315) PCIe link width for empty slots is showing as -1 (#319) Warning message only in manual mode (#323) Fixed incorrect Identity LEDs error message (#331) Unwanted fields for MEX components removed (#329) PCIe topology performance improved (#337) AIX/LINUX and IBM i partition are only for non-HMC manage system (#318) Severity values is now translatable (#357) Enabled value taken from translation file (#362) Removed .tar.xz extension from dumps (#410) whitesource-ets[bot] (1): Add .whitesource configuration file sandeepasingh116 (17): Add new toggles on CM page (#3) Changed connection status logic for Hypervisor console (#6) Remove dump download option from overview page (#9) Add text on user management page (#8) Rename the save setting button (#20) Add success toast (#18) Fix network eth1 error (#21) Disable date and time page (#24) Update password helptext (#19) Add info tooltip to frequency cap (#25) Read only user will not be able to toggle switches (#28) Make filters translatable (#33) Fix translations of vet capabilities (#35) fix english texts containing links (#38) Remove service login label for read only user (#45) fix translation defect for server power ops (#52) add toogle on Policies page (#73) Reed Frandsen (1): Removed alert message from Update firmware component (#90) Gunnar Mills (3): Enable hmc proxy (#208) Update notices to 1030 (#50) Revert "Refresh only once after login (#42)" (#59) Nikhil Ashoka (33): pdated the text of server power ops documentation (#7) Displaying Sensors table one row at a time (#11) NTP server duplicate entry is not accepted (#4) Fabric Adapters Info in Inventory page (#12) Fixed Secure LDAP using SSL checkbox value (#2) Added progress bar for activate access key (#1) Error message displayed if fails to authenticate the user (#10) Memory page made HMC-managed independent (#15) Sorting fixed for status (#17) Sensors table now updating on refresh (#22) Secure LDAP is disabled when LDAP authentication disables (#23) Removed Service consoles page for read-only users (#14) Additional message added on Disable SSH (#30) Default partition value taken from translation file (#36) Updated password Max Limit (#26) New Error message displayed if fails to authenticate the user (#27) Added Status and roles values to the translation file (#31) Title translation (#34) Power values added to translation file (#32) Health and Date format taken from translation file (#37) Added possible property values in translation file (#39) Displaying System Anchor value (#40) Added Info tooltip to VirtualTPM (#47) Added max limit based on selected user (#46) Refresh only once after login (#42) Lamp test switch disabled once ON (#48) Tab names translated in Inventory page (#54) Using privilege values from the translation file (#56) Deconfiguration type is taken from translation file (#57) Fabric Adapter table showing Name (#55) PCIe topology overlapping fix (#53) Added Identity LED to Fabric Adapters (#49) Removed Error message from Accounts verification (#44) Dixsie Wolmers (14): Fix network settings defects - FQDN, link info, and MAC address (#113) Audit translation file (#115) Network settings - update DHCP section (#114) Add deconfiguration logs page (#121) Fix host console route (#157) Fix language dropdown on login page (#166) Network settings fixes - dhcp modal, edit ipv4, default gateway (#175) Update deconfig log table (#200) Update network settings ipv4 table (#199) Fix network settings hostname and IUM errors (#210) Add ability to edit asset tag (#211) Fix LDAP form values when LDAP disabled - SW546990 (#245) Fix deconfig records defects (#246) Update maintainers - Remove Dixsie and add Sandeepa (#286) aixt9n aixt9n (2): i18n: KO_KR: Drop latest translated files for webui-vue (#257) i18n: ES_ES: Drop latest translated files for webui-vue (#258) Change-Id: Ib5cb6cfccace5b718d22173ff1df4e8ce2a1e05c
rfrandse
added a commit
that referenced
this pull request
Mar 28, 2024
Sandeepa Singh (47): Firmware-change (#66) Allow only tar file upload (#71) Hardware Deconfiguration Page (#84) Deconfig-Toggles (#110) Filter SNMP data (#112) Upload acf certificate on login page (#126) Hardware deconfiguration fix (#128) TFTP firmware update (#104) Add filter to remove absent dimms form GUI (#139) Add abiliy to sort hardware deconfig columns (#162) Add helptext for FQDN (#164) Add deconfiguration type as None (#163) Fix link to deconfiguration records (#155) Remove regex from firmware (#151) Add alert for HMC connection disconnect (#152) Update hardware deconfiguration per Demo feedback (#180) Remove Default option from Server power operations page (#188) reverting removal of Default partition environment dropdown (#190) Add Lateral cast out page (#177) fix toggle issue (#191) Add details on login page (#193) Remove TFTP server option from firmware page (#194) Real time post codes converted to ASCII (#207) fix TFTP bug (#213) Show/Hide ACF upload button (#214) Fix toggle issue (#219) Change the toggle text to configure/deconfigure (#223) Fix the sorting issue in progress logs (#240) Translate severity to fatal,predictive and manual (#235) Add Pel ID column on HW deconfiguration page (#244) Show FW_boot_side_current attribute value (#262) Added filter to remove 00000000 from post code table (#272) Fix toast msg for HW deconfiguration page (#251) Add location code of Deconfig records page (#293) Make memory page consistent (#308) Add pel id column (#332) Update service login condition (#326) Edit app nav and login file (#335) Update Automatic helptext (#340) Grey out toggle when DHCP is disabled (#338) Disable delete when system is powered on (#327) Renamed added optimization page (#346) Fix deconfiguration record translation bug (#360) Fix power page translation bug (#361) Operating mode is translatable now (#363) Fix user management page translation bugs (#365) Fix server power ops translation bugs (#359) Kenneth Fullbright (85): Removed irrelevant fields from the VET Capabilities table (#68) Update Firmware page interactions when system is powered on (#51) Updated CSR Modal & Service login Certificate Modal (#59) Removed OemIBMServiceAgent from Group Privilege list (#76) Updated Power saver modes descriptions (#83) Popup SOL Console (Host Console) not showing correct connection status (#79) Removed irrelevant fields from the VET Capabilities table (#93) Added Initiate Resource Dump Function (#103) Fixed password change/reset code for expired password (#125) Fixed global action vuex error getUsers (#120) Fixed 'Promise.all' related errors on Overview (#119) Renamed "Serial over LAN (SOL) console" page (#54) Fixed event log table to be fully responsive (#122) Prevent service user password change (#88) Turned dumps PHYP alert into a toast (#140) Repaired Service login consoles links in the navbar (#145) Removed LDAP from navigation on non admin role accounts (#108) Updated the link to consoles and other nav related items Refactored Power page and power page related things (#109) Added Power restore policy missing alert on operating mode manual (#147) Made non-service roles not pass default password for resource dumps (#135) Fixed BMC Hypervisor console switch (#159) Enhanced user creation and current user failed message for password change (#81) Fixed translation double key error (#146) Removed service privilege option from edit user and add user (#161) Enhanced resource dump error messages (#168) Refactored Power page code for efficiency and clarity (#158) Fixed init system dump from resource dump (#136) Added toast for invalid privilege (#172) Fixed Service consoles (#176) Fix user management delete table action (#179) Fixed service account resource dumps password field to allow any string (#183) Fixed Idle power saving missing reset button option (#184) Removed lower and upper limit and warning sensors (#186) Fixed missing fields for add user on user modal (#185) Fixed maximum amount of users toast error (#196) Fixed delete and replace function in Certificates table (#197) Fixed navbar missing error (#206) Fixed popup BMC and Hypervisor consoles. (#205) Fixed init system dump PHYP in standby check error (#204) Fixed closing console conntections. (#220) Fixed upload certificate button not being disabled on max certificates (#224) Added info tool tips on password changing fields. (#225) Removed operator role from add role group modal (#229) [SW550540] Removed Operator and NoAccess roles from desciption table (#228) [SW550558] Fixed proxy logout error (#226) Created info icon for enhanced information about power consumption (#232) Fixed some tables not being fully responsive (#222) Set autocomplete option to off for password fields (#231) Added dump being offloaded warning for reboot and shutdown (#241) Fixed system dump error messages (#238) Fixed factory reset to default code (#243) Changed OemIBMServiceAgent to ServiceAgent (#261) Add safe mode to user interface (#250) Fixed fresh install set password and login error (#263) Fixed DHCP delete button not disabled (#273) Removed unsupported ServiceAgent group from LDAP group privilege modal (#268) Fixed Zombie state when factory resetting (#270) Fixed unauthorized error toast on page loading (#267) Fixed firmware swapping confusion (#271) Fixed console connection indicators (#275) Fixed account polocy settings displaying not updated info on refresh (#276) Fixed running and backup image info render problem (#287) Fixed event logs not updating upon delete all button (#290) Fixed account policy radio buttons (#289) Fixed secure LDAP checkbox not showing correct values (#291) Fixed firmware update function (#296) Fixed JSON.parse error from localStorage (#298) Fixed factory reset function to be fully async (#306) Removed host console access from ReadOnly roles (#307) Fixed SRC Details not showing on non manual records (#300) Fixed page memory validation error (#313) Fixed location code not showing on Deconfiguration records table (#317) Disabled users from changing username on user management table (#321) Added Location codes for TPM (#324) Fixed console indicators not updating status (#304) Added Location codes for TPM (#325) Made more meaningful toasts (#314) Fixed manage access keys hyperlink being disabled problems on Firmware page (#322) Fixed asset tag info not showing up in modal after app refresh and tag update (#333) Removed hashes from files (#334) Created real time indicator postCodeValue filter (#302) Fixed Deconfig table download additional data button (#328) Changed page "Lateral cast out" to "Added optimization" (#341) Added notices page (#336) A Nikhil (47): Update Inventory DIMM table (#74) Update Inventory Assemblies table (#87) Update Inventory Processors table (#86) Incorrect Power mode value (#89) Dumps available on BMC are not displayed on BMC-GUI (#72) Components on the hardware page not in order (#101) No values populated for licensed and configured cores (#91) Update GUI as IBM (#116) Rename Update Firmware access key (#117) Health and state field of assembly components is missing in inventory page (#99) Event logs add missing information (#111) GUI has no way to turn off System attention LED (#129) Event log does not show information for service (#133) GUI missing detailed COD (#124) Rename count in system table (#149) FCO page accepts value greater than the number of licensed cores (#142) Part number field is showing spare part number value (#165) Wrong lable on SRC for logs (#156) Inventory and LEDs page has two system entries (#137) Add toggle to enable/disable the secure version lock in (#167) Factory reset option should only be provided at power off (#174) Health in critical state after marking critical errors as resolved (#189) Concurrent maintenance Page (#202) Download implementation in Event logs (#192) Missing host USB enable/disable (#239) Prevent system power on when BMC is not in Ready state (#227) Adding mex chassis Info (#233) Mex IO enclosure firmware version not displayed (#265) PCIe Hardware Topology (#181) Warning in PcieTopology.vue (#282) Pcie-topology and Inventory fixes (#288) Unable to edit group name in the Add Role group field. (#303) PCIe Topology Save changes (#309) Invalid range for I/O Adapter enlarged capacity (#311) Status for both system and chassis comes as absent at host power off state (#312) Status for system table should be Present (#320) Fixed Identify LED error in MEX chassis (#330) Assemblies section does not has search option in Inventory page (#315) PCIe link width for empty slots is showing as -1 (#319) Warning message only in manual mode (#323) Fixed incorrect Identity LEDs error message (#331) Unwanted fields for MEX components removed (#329) PCIe topology performance improved (#337) AIX/LINUX and IBM i partition are only for non-HMC manage system (#318) Severity values is now translatable (#357) Enabled value taken from translation file (#362) Removed .tar.xz extension from dumps (#410) whitesource-ets[bot] (1): Add .whitesource configuration file sandeepasingh116 (17): Add new toggles on CM page (#3) Changed connection status logic for Hypervisor console (#6) Remove dump download option from overview page (#9) Add text on user management page (#8) Rename the save setting button (#20) Add success toast (#18) Fix network eth1 error (#21) Disable date and time page (#24) Update password helptext (#19) Add info tooltip to frequency cap (#25) Read only user will not be able to toggle switches (#28) Make filters translatable (#33) Fix translations of vet capabilities (#35) fix english texts containing links (#38) Remove service login label for read only user (#45) fix translation defect for server power ops (#52) add toogle on Policies page (#73) Reed Frandsen (1): Removed alert message from Update firmware component (#90) Gunnar Mills (3): Enable hmc proxy (#208) Update notices to 1030 (#50) Revert "Refresh only once after login (#42)" (#59) Nikhil Ashoka (33): pdated the text of server power ops documentation (#7) Displaying Sensors table one row at a time (#11) NTP server duplicate entry is not accepted (#4) Fabric Adapters Info in Inventory page (#12) Fixed Secure LDAP using SSL checkbox value (#2) Added progress bar for activate access key (#1) Error message displayed if fails to authenticate the user (#10) Memory page made HMC-managed independent (#15) Sorting fixed for status (#17) Sensors table now updating on refresh (#22) Secure LDAP is disabled when LDAP authentication disables (#23) Removed Service consoles page for read-only users (#14) Additional message added on Disable SSH (#30) Default partition value taken from translation file (#36) Updated password Max Limit (#26) New Error message displayed if fails to authenticate the user (#27) Added Status and roles values to the translation file (#31) Title translation (#34) Power values added to translation file (#32) Health and Date format taken from translation file (#37) Added possible property values in translation file (#39) Displaying System Anchor value (#40) Added Info tooltip to VirtualTPM (#47) Added max limit based on selected user (#46) Refresh only once after login (#42) Lamp test switch disabled once ON (#48) Tab names translated in Inventory page (#54) Using privilege values from the translation file (#56) Deconfiguration type is taken from translation file (#57) Fabric Adapter table showing Name (#55) PCIe topology overlapping fix (#53) Added Identity LED to Fabric Adapters (#49) Removed Error message from Accounts verification (#44) Dixsie Wolmers (14): Fix network settings defects - FQDN, link info, and MAC address (#113) Audit translation file (#115) Network settings - update DHCP section (#114) Add deconfiguration logs page (#121) Fix host console route (#157) Fix language dropdown on login page (#166) Network settings fixes - dhcp modal, edit ipv4, default gateway (#175) Update deconfig log table (#200) Update network settings ipv4 table (#199) Fix network settings hostname and IUM errors (#210) Add ability to edit asset tag (#211) Fix LDAP form values when LDAP disabled - SW546990 (#245) Fix deconfig records defects (#246) Update maintainers - Remove Dixsie and add Sandeepa (#286) aixt9n aixt9n (2): i18n: KO_KR: Drop latest translated files for webui-vue (#257) i18n: ES_ES: Drop latest translated files for webui-vue (#258) Change-Id: Ib5cb6cfccace5b718d22173ff1df4e8ce2a1e05c
rfrandse
added a commit
that referenced
this pull request
Mar 28, 2024
…-bmc-code-mgmt: downstream srcrev bump 0890ab9453..44598d1654 (#3451) * phosphor-bmc-code-mgmt: downstream srcrev bump 0890ab9453..44598d1654 George Liu (7): usb: Initialize USB Code Update usb: Copy image file to /tmp/images via USB usb: Add utility for D-Bus usb: Update the RequestedActivation property usb: Add service and rules files Add GeorgeLiu as the Reviewer Fix the core dump by using filesystem error_code Lakshmi Yadlapati (1): u-boot mirroring support moni kumar (1): Removed reset of the interface ActivationProgress Isaac Kurth (4): gen-bios-tar: fix shellcheck warnings obmc-flash-bmc: fix shellcheck warnings Enable shellcheck field mode: restore works on all systems Thang Tran (1): Create ActivationBlocksTransition before write HOST BIOS image Glukhov Mikhail (2): Fix tar error when packing files Added ExtendedVersion creation to gen-bios-tar Adriana Kobylak (16): updater: Introduce the concept of flash id serialize: Use flash id instead of version id Use flash id to write image to flash Determine functional versions from mount directory Support uploading same image for multiple times updater: Add activations after versions sync-once: Fix shellcheck warnings version: Change error to info for missing MANIFEST fields usb: Automatically reboot and update both sides image_manager: Add check for IBM extended version format (#3) uak: Add sync method utils: add getSubTree UAK: Dynamically read object path from subtree UAK: Add support to sync to op-panel VPD msl: Store Min Ship Level in VPD (#47) msl: Set the VPD msl to the current version (#49) Konstantin Aladyshev (1): Correct link to the Software Architecture document Reed Frandsen (1): Merge pull request #9 from anoo1/1050-uak Brad Bishop (1): treewide: remove dependencies on mapper.target Justin Ledford (1): Add support for Inventory.Decorator.Compatible Patrick Williams (8): meson: simplify dependencies sdbusplus: object: don't use 'bool' argument constructor OWNERS: switch 'matches' to 'matchers' sdbusplus: use shorter type aliases MAINTAINERS: remove file meson: remove oe-sdk support prettier: re-format beautysh: re-format Lei YU (17): meson: Fix deprecated meson warnings cleanup: Fix warnings found by cppcheck item_updater: Fix crash in updateUbootEnvVars() dual-image: Mount alt dirs dual-image: Always create os-release symlink dual-image: Do not erase image if os-release is not found dual-image: Detect the running image slot dual-image: Set priority for primary and secondary flash dual-image: Add alt-rwfs-dir config dual-image: Sync files before sync-manager starts dual-image: Remove the functional check on delete dual-image: Implement BMC update when running on secondary dual-image: remount alt partitions during update dual-image: Add reset-cs0-aspeed to reset the CS dual-image: Fix the install of [email protected] obmc-flash-bmc: Ignore SC2295 image-verify: Skip full verify for non-BMC images Zami Seck (5): Add Progress Code For USB Code Update (#31) Ensure /tmp/images/ Directory Does Not Fill Up (#32) Ensure only one code update occurs at a time (#33) UAK Emergency Bypass Fix (#40) Initiate Dump After Code Update Failure (#27) Andrew Geissler (9): make getproperty a templated function side-switch: introduce new bmc update feature side-switch: check priority of running image side-switch: power off chassis in prep for update side-switch: set power restore policy to always-on side-switch: request bmc reboot to switch to new image side-switch: add service to run side-switch function side-switch: ensure both host and chassis off ensure disable of reboot occurs after enable zamiseck (8): ItemUpdater::erase() : Fixed double delete Signature Validation : Change Error Thrown Change location of MSL error Symlink /tmp/images/ Directory To Allow For More Storage Clear /tmp/images/ Directory Upon Reboot UAK : add support for access key checking UAK : adds access key verification to activation process UAK Validation: Change error thrown Change-Id: I939f8144ffe9065e5ae54bc40110e60470cf106a * phosphor-bmc-code-mgmt: u-boot mirroring support Lakshmi Yadlapati (1): u-boot mirroring support Change-Id: Ia817b6af5e0b2ef3312e5b05c05ca0a38d4f39de Signed-off-by: Andrew Geissler <[email protected]> Signed-off-by: Lakshmi Yadlapati <[email protected]> Co-authored-by: Andrew Geissler <[email protected]>
rfrandse
added a commit
that referenced
this pull request
Mar 28, 2024
Reed Frandsen (1): Merge pull request #19 from anoo1/1050-ibm Joseph Reynolds (7): Adapt to OpenBMC's Linux-PAM module changes Add priv-OemIBMServiceAgent Fix UserLockedForFailedAttempt for locked users (#8) Handle faillock for unknown user (#9) Restrict priv-oemibmserviceagent role (#11) restrict the priv-operator role (#14) Add ssh users to hostconsoleaccess group (#17) tomippolito (1): Update to fix SW544220 (#16) Change-Id: I0bbd07c0ba1cb45768349c039fd8a027f076fbf5
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Signed-off-by: Matt Spinler [email protected]