add target RADIOLINKF722

src/main/target/RADIOLINKF722/CMakeLists.txt

@@ -0,0 +1 @@
+target_stm32f722xe(RADIOLINKF722)

src/main/target/RADIOLINKF722/config.c

@@ -0,0 +1,38 @@
+/*
+ * This file is part of Cleanflight and Betaflight.
+ *
+ * Cleanflight and Betaflight are free software. You can redistribute
+ * this software and/or modify this software under the terms of the
+ * GNU General Public License as published by the Free Software
+ * Foundation, either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * Cleanflight and Betaflight are distributed in the hope that they
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "fc/fc_msp_box.h"
+#include "io/serial.h"
+#include "drivers/pwm_mapping.h"
+
+void targetConfiguration(void)
+{
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART4)].functionMask = FUNCTION_ESCSERIAL;
+    pinioBoxConfigMutable()->permanentId[0] = BOX_PERMANENT_ID_USER1;
+    timerOverridesMutable(timer2id(TIM2))->outputMode = OUTPUT_MODE_MOTORS;
+    timerOverridesMutable(timer2id(TIM3))->outputMode = OUTPUT_MODE_MOTORS;
+    timerOverridesMutable(timer2id(TIM4))->outputMode = OUTPUT_MODE_MOTORS;
+}

src/main/target/RADIOLINKF722/target.c

@@ -0,0 +1,49 @@
+/*
+ * This file is part of Cleanflight and Betaflight.
+ *
+ * Cleanflight and Betaflight are free software. You can redistribute
+ * this software and/or modify this software under the terms of the
+ * GNU General Public License as published by the Free Software
+ * Foundation, either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * Cleanflight and Betaflight are distributed in the hope that they
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "platform.h"
+#include "drivers/bus.h"
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/pinio.h"
+#include "drivers/sensor.h"
+
+BUSDEV_REGISTER_SPI_TAG(busdev_bmi270,   DEVHW_BMI270,  BMI270_SPI_BUS,   BMI270_CS_PIN,   NONE,   0,  DEVFLAGS_NONE,  IMU_BMI270_ALIGN);
+BUSDEV_REGISTER_SPI_TAG(busdev_icm42688, DEVHW_ICM42605, ICM42688_SPI_BUS, ICM42688_CS_PIN, NONE, 0, DEVFLAGS_NONE, IMU_ICM42605_ALIGN);
+
+timerHardware_t timerHardware[] = {
+
+    DEF_TIM(TIM2, CH1, PA15,    TIM_USE_OUTPUT_AUTO, 0, 0),  // S1
+    DEF_TIM(TIM2, CH2, PB3,     TIM_USE_OUTPUT_AUTO, 0, 0),  // S2
+    DEF_TIM(TIM3, CH1, PB4,     TIM_USE_OUTPUT_AUTO, 0, 0),  // S3
+    DEF_TIM(TIM4, CH1, PB6,     TIM_USE_OUTPUT_AUTO, 0, 0),  // S4
+    DEF_TIM(TIM4, CH2, PB7,     TIM_USE_OUTPUT_AUTO, 0, 0),  // S5
+    DEF_TIM(TIM3, CH2, PB5,     TIM_USE_OUTPUT_AUTO, 0, 0),  // S6 Clash with S2, DSHOT does not work
+    DEF_TIM(TIM3, CH3, PB0,     TIM_USE_OUTPUT_AUTO, 0, 0),  // S7
+    DEF_TIM(TIM3, CH4, PB1,     TIM_USE_OUTPUT_AUTO, 0, 0),  // S8
+
+    DEF_TIM(TIM8, CH3, PC8,  TIM_USE_LED, 0, 0),    // LED
+    DEF_TIM(TIM5, CH1, PA0,  TIM_USE_ANY, 0, 0), // Camera Control
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);

src/main/target/RADIOLINKF722/target.h

@@ -0,0 +1,169 @@
+/*
+ * This file is part of Cleanflight and Betaflight.
+ *
+ * Cleanflight and Betaflight are free software. You can redistribute
+ * this software and/or modify this software under the terms of the
+ * GNU General Public License as published by the Free Software
+ * Foundation, either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * Cleanflight and Betaflight are distributed in the hope that they
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "RALI"
+#define USBD_PRODUCT_STRING  "RADIOLINKF722"
+
+#define LED0                PA14
+
+#define USE_BEEPER
+#define BEEPER              PC13
+#define BEEPER_INVERTED
+
+// *************** UART *****************************
+#define USB_IO
+#define USE_VCP
+// #define VBUS_SENSING_PIN          PC15
+// #define VBUS_SENSING_ENABLED
+
+#define USE_PINIO
+#define USE_PINIOBOX
+#define PINIO1_PIN                  PC9
+#define PINIO1_FLAGS                PINIO_FLAGS_INVERTED
+
+#define USE_UART1
+#define UART1_RX_PIN            PA10
+#define UART1_TX_PIN            PA9
+
+#define USE_UART2
+#define UART2_RX_PIN            PA3
+#define UART2_TX_PIN            PA2
+
+#define USE_UART3
+#define UART3_RX_PIN            PB11
+#define UART3_TX_PIN            PB10
+
+#define USE_UART4
+#define UART4_RX_PIN            PA1
+#define UART4_TX_PIN            NONE
+
+#define USE_UART6
+#define UART6_RX_PIN            PC7
+#define UART6_TX_PIN            PC6
+
+#define SERIAL_PORT_COUNT       6
+
+// *************** Gyro & ACC **********************
+#define USE_TARGET_IMU_HARDWARE_DESCRIPTORS
+
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+// ICM42605/ICM42688P
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN       CW180_DEG
+#define ICM42688_SPI_BUS         BUS_SPI1
+#define ICM42688_CS_PIN          PB2
+
+//BMI270
+#define USE_IMU_BMI270
+#define IMU_BMI270_ALIGN        CW180_DEG
+#define BMI270_SPI_BUS          BUS_SPI1
+#define BMI270_CS_PIN           PB2
+
+// *************** I2C(Baro & I2C) **************************
+#define USE_I2C
+
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL                PB8
+#define I2C1_SDA                PB9
+
+// Baro
+#define USE_BARO
+#define USE_BARO_BMP280
+#define USE_BARO_MS5611
+#define USE_BARO_DPS310
+#define USE_BARO_SPL06
+#define BARO_I2C_BUS          	BUS_I2C1	
+
+// Mag
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C1
+#define USE_MAG_ALL
+
+// *************** FLASH **************************
+
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PC10
+#define SPI3_MISO_PIN   	    PC11
+#define SPI3_MOSI_PIN   	    PC12
+
+#define W25N01G_SPI_BUS BUS_SPI3
+#define W25N01G_CS_PIN  PD2
+
+#define USE_BLACKBOX
+#define USE_FLASHFS
+#define USE_FLASH_W25N01G
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+// *************** OSD *****************************
+#define USE_OSD
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN           PB14
+#define SPI2_MOSI_PIN           PB15
+
+#define USE_MAX7456
+#define MAX7456_SPI_BUS         BUS_SPI2
+#define MAX7456_CS_PIN          PB12
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_CHANNEL_1_PIN           PC2
+#define ADC_CHANNEL_2_PIN           PC0
+#define ADC_CHANNEL_3_PIN           PC1
+
+#define VBAT_ADC_CHANNEL            ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_3
+#define RSSI_ADC_CHANNEL            ADC_CHN_2
+
+// *************** LED *****************************
+#define USE_LED_STRIP
+#define WS2811_PIN PC8
+
+// ********** Optiical Flow adn Lidar **************
+#define USE_RANGEFINDER
+#define USE_RANGEFINDER_MSP
+#define RANGEFINDER_I2C_BUS     BUS_I2C1
+#define USE_OPFLOW
+#define USE_OPFLOW_MSP
+
+#define DEFAULT_FEATURES            (FEATURE_TX_PROF_SEL | FEATURE_CURRENT_METER | FEATURE_TELEMETRY | FEATURE_VBAT | FEATURE_OSD | FEATURE_BLACKBOX)
+#define USE_DSHOT
+#define USE_ESC_SENSOR
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define SERIALRX_UART           SERIAL_PORT_USART2
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+
+#define MAX_PWM_OUTPUT_PORTS        8
+
+#define CURRENT_METER_SCALE         490
+
+#define TARGET_IO_PORTA         0xffff
+#define TARGET_IO_PORTB         0xffff
+#define TARGET_IO_PORTC         0xffff
+#define TARGET_IO_PORTD         (BIT(2))