Sagemcom F@st integration for Home Assistant

This integration adds support for Sagemcom F@st routers to Home Assistant. Currently only a basic device_tracker entity is supported, however this could be extended in the future with more sensors.

Sagemcom F@st routers are used by many providers worldwide, but many of them did rebrand the router. Examples are the b-box from Proximus, Home Hub from bell, Salt Box X6 (Switzerland) and the Smart Hub from BT.

Features

• Device Tracker, to track connected devices to your router (WiFi and Ethernet)
• Reboot button, to reboot your gateway from Home Assistant

Known limitations / issues

Since this integration is only used by a few users, not much time has been spent on the development lately. There are currently some known limitations and bugs. Contributions are welcome!

• After reboot, not connected devices have status 'unavailable' #14

Installation

Manual

Copy the custom_components/sagemcom_fast to your custom_components folder. Reboot Home Assistant and install the Sagemcom F@st integration via the integrations config flow.

HACS

Add this repository as a custom repository to HACS as described here, search for the Sagemcom F@st integration and choose install. Reboot Home Assistant and install the Sagemcom F@st integration via the integrations config flow.

https://github.com/imicknl/ha-sagemcom-fast

Usage

This integration can only be configured via the Config Flow. Go to Configuration -> Integrations -> Add Integration and choose Sagemcom F@st. The prompt will ask you for your credentials. Please note that some routers require authentication, where others can login with guest username and an empty password.

The first login might take a longer time (up to a minute), since we will try to retrieve the encryption method used by your router.

Supported devices

Have a look at the table below for more information about supported devices. The Sagemcom F@st series is used by multiple cable companies, where some cable companies did rebrand the router. Examples are the b-box from Proximus, Home Hub from bell and the Smart Hub from BT.

Router Model	Provider(s)	Authentication Method	Comments
Sagemcom F@st 3864	Optus	sha512	username: guest, password: ""
Sagemcom F@st 3865b	Proximus (b-box3)	md5
Sagemcom F@st 3890V3	Delta / Zeelandnet	sha512
Sagemcom F@st 3896		sha512	username: admin
Sagemcom F@st 4360Air	KPN	md5
Sagemcom F@st 4353	Belong Gateway	md5	username: admin, password: ""
Sagemcom F@st 5250	Bell (Home Hub 2000)	md5	username: guest, password: ""
Sagemcom F@st 5280		sha512
Sagemcom F@st 5359	KPN (Box 12)	sha512	username: admin
Sagemcom F@st 5364	BT (Smart Hub)	md5	username: guest, password: ""
SagemCom F@st 5366SD	Eir F3000	md5
Sagemcom F@st 5370e	Telia	sha512
Sagemcom F@st 5380	TDC	md5
Sagemcom F@st 5566	Bell (Home Hub 3000)	md5	username: guest, password: ""
Sagemcom F@st 5688T	Salt (FibreBox_X6)	sha512	username: admin
Sagemcom F@st 5689	Bell (Home Hub 4000)	md5	username: admin, password: ""
Sagemcom F@st 5655V2	MásMóvil	md5
Sagemcom F@st 5657IL		md5
Speedport Pro	Telekom	md5	username: admin

Contributions welcome. If you router model is supported by this package, but not in the list above, please create an issue or directly pull request.

Advanced

Enable debug logging

The logger integration lets you define the level of logging activities in Home Assistant. Turning on debug mode will show more information to help us understand your issues.

logger:
  default: critical
  logs:
    custom_components.sagemcom_fast: debug

Device not supported / working correctly

If you are not able to use this integration with your Sagemcom F@st device, please create an issue with as much information as possible. Turn on debug logging and share the logs in your issue description.