Adding enigma2 docs

_config.yml

@@ -139,8 +139,8 @@ social:
 # Home Assistant release details
 current_major_version: 0
 current_minor_version: 88
-current_patch_version: 0
-date_released: 2019-02-20
+current_patch_version: 2
+date_released: 2019-02-27
 
 # Either # or the anchor link to latest release notes in the blog post.
 # Must be prefixed with a # and have double quotes around it.

source/_components/ads.markdown

@@ -40,7 +40,7 @@ To enable ADS, add the following lines to your `configuration.yaml` file:
 # Example configuration.yaml entry
 ads:
   device: '127.0.0.1.1.1'
-  port: 48898
+  port: 801
 ```
 
 {% configuration %}
@@ -137,7 +137,7 @@ name:
 
 ## {% linkable_title Sensor %}
 
-The `ads` sensor platform allows reading the value of a numeric variable on your ADS device. The variable can be of type *INT*, *UINT* or *BYTE*.
+The `ads` sensor platform allows reading the value of a numeric variable on your ADS device. The variable can be of type *INT*, *UINT*,  *BYTE*, *DINT* or *UDINT*. 
 
 To use your ADS device, you first have to set up your [ADS hub](/components/ads/) and then add the following to your `configuration.yaml`
 file:
@@ -158,7 +158,7 @@ adsvar:
   type: string
 adstype:
   required: false
-  description: The datatype of the ADS variable, possible values are int, uint, byte.
+  description: The datatype of the ADS variable, possible values are int, uint, byte, dint, udint.
   default: int
   type: string
 name:
@@ -197,4 +197,4 @@ name:
   required: false
   description: An identifier for the switch in the frontend.
   type: string
-{% endconfiguration %}
+{% endconfiguration %}

source/_components/apcupsd.markdown

@@ -8,12 +8,24 @@ comments: false
 sharing: true
 footer: true
 logo: apcupsd.png
-ha_category: System Monitor
+ha_category:
+  - System Monitor
+  - Binary Sensor
+  - Sensor
 ha_release: 0.13
+ha_iot_class: "Local Polling"
+redirect_from:
+  - /components/binary_sensor.apcupsd/
+  - /components/sensor.apcupsd/
 ---
 
 [APCUPSd](http://www.apcupsd.org/) status information can be integrated into Home Assistant when the Network Information Server (NIS) [is configured](http://www.apcupsd.org/manual/manual.html#nis-server-client-configuration-using-the-net-driver) is enabled on the APC device.
 
+There is currently support for the following device types within Home Assistant:
+
+- [Binary Sensor](#binary-sensor)
+- [Sensor](#sensor)
+
 ## {% linkable_title Configuration %}
 
 To enable this sensor, add the following lines to your `configuration.yaml`:
@@ -39,3 +51,89 @@ port:
 <p class='note'>
 If you get `ConnectionRefusedError: Connection refused` errors in the Home assistant logs, ensure the [APCUPSd](http://www.apcupsd.org/) configuration directives used by its Network Information Server is set to permit connections from all addresses [NISIP 0.0.0.0](http://www.apcupsd.org/manual/manual.html#configuration-directives-used-by-the-network-information-server), else non-local addesses will not connect. This includes Hass.io running in Docker, even when hosted on the same machine or a virtual machine.
  </p>
+
+## {% linkable_title Binary sensor %}
+
+In addition to the [APCUPSd Sensor](#sensor) devices, you may also create a device which is simply "on" when the UPS status is online and "off" at all other times.
+
+### {% linkable_title Configuration %}
+
+To enable this sensor, you first have to set up apcupsd component (above), and add the following lines to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+binary_sensor:
+  - platform: apcupsd
+```
+
+{% configuration %}
+name:
+  description: Name to use in the frontend.
+  required: false
+  type: string
+  default: UPS Online Status
+{% endconfiguration %}
+
+## {% linkable_title Sensor %}
+
+ The `apcupsd` sensor platform allows you to monitor a UPS (battery backup) by using data from the [apcaccess](http://linux.die.net/man/8/apcaccess) command.
+
+### {% linkable_title Configuration %}
+
+To use this sensor platform, you first have to set up apcupsd component (above), and add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+sensor:
+  - platform: apcupsd
+    resources:
+      - bcharge
+      - linev
+```
+
+{% configuration %}
+resources:
+  description: Contains all entries to display.
+  required: true
+  type: list
+{% endconfiguration %}
+
+### {% linkable_title Example  %}
+
+Given the following output from `apcaccess`:
+
+```yaml
+APC      : 001,051,1149
+DATE     : 2016-02-09 17:13:31 +0000
+HOSTNAME : localhost
+VERSION  : 3.14.12 (29 March 2014) redhat
+UPSNAME  : netrack
+CABLE    : Custom Cable Smart
+DRIVER   : APC Smart UPS (any)
+UPSMODE  : Stand Alone
+STARTTIME: 2016-02-09 16:06:47 +0000
+MODEL    : SMART-UPS 1400
+STATUS   : TRIM ONLINE
+LINEV    : 247.0 Volts
+LOADPCT  : 13.0 Percent
+BCHARGE  : 100.0 Percent
+TIMELEFT : 104.0 Minutes
+MBATTCHG : 5 Percent
+MINTIMEL : 3 Minutes
+MAXTIME  : 0 Seconds
+MAXLINEV : 249.6 Volts
+MINLINEV : 244.4 Volts
+OUTPUTV  : 218.4 Volts
+[...]
+```
+
+Use the (case insensitive) values from the left hand column:
+
+```yaml
+sensor:
+  - platform: apcupsd
+    resources:
+      - linev
+      - loadpct
+      - timeleft
+```

source/_components/binary_sensor.rest.markdown

@@ -92,6 +92,11 @@ verify_ssl:
   required: false
   type: boolean
   default: true
+timeout:
+  description: Defines max time to wait data from the endpoint.
+  required: false
+  type: positive integer
+  default: 10
 authentication:
   description: "Type of the HTTP authentication. `basic` or `digest`."
   required: false