Add documentation for Point alarm_control_panel

source/_components/point.markdown

@@ -8,16 +8,24 @@ comments: false
 sharing: true
 footer: true
 logo: minut.svg
-ha_category: Hub
+ha_category:
+  - Hub
+  - Alarm
+  - Binary Sensor
+  - Sensor
 featured: false
 ha_release: "0.83"
+ha_config_flow: true
 ha_iot_class: "Cloud Polling"
-ha_qa_scale: silver
+ha_qa_scale: gold
+redirect_from:
+  - /components/binary_sensor.point/
+  - /components/sensor.point/
 ---
 
-The Point component is the main component to integrate the [Minut Point](https://minut.com/). To connect Point, you will have to [sign up for a developer account](https://minut.com/community/developers/) and get a `client_id` and `client_secret` using the `callback url`  as `base_url` + `/api/minut`, e.g., `http://localhost:8123/api/minut`. The `client_id` and `client_secret` should be used as below.
+The Point hub enables integration with the [Minut Point](https://minut.com/). To connect with Point, you will have to [sign up for a developer account](https://minut.com/community/developers/) and get a `client_id` and `client_secret` with the `callback url` configured as your Home Assistant `base_url` + `/api/minut`, e.g. `http://localhost:8123/api/minut`. The `client_id` and `client_secret` should be used as below.
 
-Once Home Assistant is started, a configurator will pop up asking you to Authenticate your Point account via a link when you follow the link and have clicked on **Accept** you will be redirected to the `callback url` and the Point integration will be automatically configured and you can go back to the original dialog and press **Submit**.
+Once Home Assistant is started, a configurator will pop up asking you to Authenticate your Point account via a link. When you follow the link and click on **Accept** you will be redirected to the `callback url` and the Point integration will be automatically configured and you can go back to the original dialog and press **Submit**.
 
 ### {% linkable_title Configuration %}
 
@@ -39,7 +47,95 @@ client_secret:
   type: string
 {% endconfiguration %}
 
+# {% linkable_title Device types %}
+
+The integration supports the following device types within Home Assistant:
+  - [Alarm](#alarm)
+  - [Binary Sensor](#binary-sensor)
+  - [Sensor](#sensor)
+
 <p class='note'>
-The Point is just active occasionally so the sensors are only updated every hour or so.
-The events sent from the Point is sent as a webhook back to Home Assistant with `event_type` as `point_webhook_received`, please consider the documentation for the [IFTT](/components/ifttt/) component on how to write automations for webhooks.
+The Point is just active occasionally so the [Sensors](#sensor) are only updated every hour or so. The [Binary Sensors](#binary-sensor) are however updated via [Cloud Push](https://www.home-assistant.io/blog/2016/02/12/classifying-the-internet-of-things/#cloud-pushing-new-state), making the changes close to instant. 
+</p>
+
+## {% linkable_title Alarm %}
+
+Each home configured in the Point mobile application will show up as a separate alarm control panel. The panels allow **arming** and **disarming** of the Point home alarm system.
+
+<p class="note">
+The Point only supports a Arm/Disarm action, so there is no difference between `Arm Home` and `Arm Away`.
 </p>
+
+## {% linkable_title Binary Sensor %}
+
+Each Point exposes the following binary sensors:
+
+- **battery**: `On` means low, `Off` means normal
+- **button_press**: `On` means the button was pressed, `Off` means normal
+- **cold**: `On` means cold, `Off` means normal
+- **connectivity**: `On` means connected, `Off` means disconnected
+- **dry**: `On` means too dry, `Off` means normal
+- **heat**: `On` means hot, `Off` means normal
+- **light**: `On` means light detected, `Off` means no light
+- **moisture**: `On` means moisture detected (wet), `Off` means no moisture (dry)
+- **motion**: `On` means motion detected, `Off` means no motion (clear)
+- **sound**: `On` means sound detected, `Off` means no sound (clear)
+- **tamper**: `On` means the point was removed or attached, `Off` means normal
+
+<p class="note">
+The binary sensors **battery**, **button_press** and **tamper** are switched `On` for a breif moment and are then switched back to `Off`.
+</p>
+
+### {% linkable_title Automation example %}
+
+The following example show how to implement an automation for the **button_press** binary sensor.
+
+{% raw %}
+```yaml
+# Example configuration.yaml Automation entry
+automation:
+  alias: Point button press
+  trigger:
+  - platform: state
+    entity_id: binary_sensor.point_button_press  # Change this accordingly
+    to: 'on'
+  action:
+  - service: persistent_notification.create
+    data:
+      title: Point button press
+      message: Point button was pressed.
+```
+{% endraw %}
+
+### {% linkable_title Webhook events %}
+
+The events shown as [binary sensors](#binary-sensor) are sent to Home Assistant as webhooks with the `event_type` set to `point_webhook_received`. Below is an example of how to use such a webhook do note the `trigger.event.data.event.device_id` which translates to the id of the Point device that sent the event.
+
+{% raw %}
+```yaml
+# Example configuration.yaml Automation entry
+automation:
+  alias: Point button press (webhook)
+  trigger:
+  - platform: event
+    event_type: point_webhook_received
+    event_data: {}
+  condition:
+    condition: template
+    value_template: "{{ trigger.event.data.event.type == 'short_button_press' }}"
+  action:
+  - service: persistent_notification.create
+    data_template:
+      title: Point button press (webhook)
+      message: "Button press on Point {{ trigger.event.data.event.device_id }}"
+```
+{% endraw %}
+
+## {% linkable_title Sensor %}
+
+Each Point exposes the following sensors:
+
+- **temperature**: Temperature in °C.
+- **humidity**: Percentage of humidity in the air.
+- **pressure**: Pressure in hPa.
+- **sound_level**: Sound level in dBA