home-assistant · silamon · Dec 28, 2025 · Dec 28, 2025 · Dec 28, 2025 · Dec 28, 2025
@@ -22,7 +22,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `powerwall` integration allows you to integrate your [Tesla Powerwall](https://www.tesla.com/powerwall) into Home Assistant.
+The **Tesla Powerwall** {% term integration %} allows you to integrate your [Tesla Powerwall](https://www.tesla.com/powerwall) into Home Assistant.
 
 There is currently support for the following device types within Home Assistant:
 

@@ -29,7 +29,7 @@ ha_dhcp: true
 ha_integration_type: hub
 ---
 
-The Tado {% term integration %} platform is used as an interface to the [my.tado.com](https://my.tado.com/) website.
+The **Tado** {% term integration %} platform is used as an interface to the [my.tado.com](https://my.tado.com/) website.
 
 There is currently support for the following device types within Home Assistant:
 

@@ -20,7 +20,7 @@ ha_integration_type: device
 ha_dhcp: true
 ---
 
-The Tailwind {% term integration %} integrates [Tailwind](https://gotailwind.com/)
+The **Tailwind** {% term integration %} integrates [Tailwind](https://gotailwind.com/)
 garage door controllers fully locally.
 
 This integration has been tested with the following Tailwind devices:

@@ -23,7 +23,7 @@ ha_integration_type: service
 ha_quality_scale: platinum
 ---
 
-The `tankerkoenig` integration allows you to monitor the fuel prices with [tankerkoenig.de](https://www.tankerkoenig.de/) from within Home Assistant and setup automations based on the information.
+The **Tankerkoenig** {% term integration %} allows you to monitor the fuel prices with [tankerkoenig.de](https://www.tankerkoenig.de/) from within Home Assistant and setup automations based on the information.
 
 ## Prerequisites
 

diff --git a/source/_integrations/tapsaff.markdown b/source/_integrations/tapsaff.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `tapsaff` binary sensor {% term integration %} provides the 'Taps Aff' status for a given location within the UK using [Taps Aff](https://www.taps-aff.co.uk/).
+The **Taps Aff** {% term integration %} provides the 'Taps Aff' status for a given location within the UK using [Taps Aff](https://www.taps-aff.co.uk/).
 
 ## Configuration
 

@@ -25,7 +25,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-This integration allows you to control [Tasmota](https://tasmota.github.io/docs/) devices over MQTT.
+This {% term integration %} allows you to control [Tasmota](https://tasmota.github.io/docs/) devices over MQTT.
 
 ## Requirements
 

@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: hub
 ---
 
-The Tautulli integration will monitor activity on a given [Tautulli Server][tautulli]. It will create a sensor that shows the number of currently active streams as the state. If you click the sensor for more details, it will show you more statistics.
+The **Tautulli** {% term integration %} will monitor activity on a given [Tautulli Server][tautulli]. It will create a sensor that shows the number of currently active streams as the state. If you click the sensor for more details, it will show you more statistics.
 
 ## Setup
 

diff --git a/source/_integrations/tcp.markdown b/source/_integrations/tcp.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The TCP {% term integration %} allows the integration of some services for which a specific Home Assistant integration does not exist. If the service communicates over a TCP socket with a simple request/reply mechanism then the chances are that this integration will allow integration with it.
+The **TCP** {% term integration %} allows the integration of some services for which a specific Home Assistant integration does not exist. If the service communicates over a TCP socket with a simple request/reply mechanism then the chances are that this integration will allow integration with it.
 
 There is currently support for the following device types within Home Assistant:
 

diff --git a/source/_integrations/technove.markdown b/source/_integrations/technove.markdown
@@ -19,7 +19,7 @@ ha_platforms:
 ha_integration_type: device
 ---
 
-The TechnoVE {% term integration %} provides connectivity with TechnoVE Smart Charging Station through the station local API.
+The **TechnoVE** {% term integration %} provides connectivity with TechnoVE Smart Charging Station through the station local API.
 
 {% include integrations/config_flow.md %}
 

diff --git a/source/_integrations/ted5000.markdown b/source/_integrations/ted5000.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `ted 5000` monitors electricity consumption/production by connecting to the [TED](https://www.theenergydetective.com/) gateway, itself connected to one or several Measuring Transmitting Units (MTU). The platform creates up to two sensors per MTU, one for Wattage the other for Voltage.
+The **The Energy Detective TED5000** {% term integration %} monitors electricity consumption/production by connecting to the [TED](https://www.theenergydetective.com/) gateway, itself connected to one or several Measuring Transmitting Units (MTU). The platform creates up to two sensors per MTU, one for Wattage the other for Voltage.
 
 If you want to enable the ted5000 {% term integration %}, add the following lines to your {% term "`configuration.yaml`" %} file.
 {% include integrations/restart_ha_after_config_inclusion.md %}

@@ -21,7 +21,7 @@ ha_integration_type: integration
 ha_quality_scale: platinum
 ---
 
-This integration interacts with your [Tedee](https://tedee.com) locks by communicating with the Tedee bridge through HTTP. The integration will communicate with your lock locally.
+This {% term integration %} interacts with your [Tedee](https://tedee.com) locks by communicating with the Tedee bridge through HTTP. The integration will communicate with your lock locally.
 
 ## Prerequisites
 

diff --git a/source/_integrations/telegram.markdown b/source/_integrations/telegram.markdown
@@ -22,7 +22,7 @@ Please use the [Telegram bot integration](/integrations/telegram_bot) instead.
 
 {% endwarning %}
 
-The `telegram` {% term integration %} uses [Telegram](https://www.telegram.org) to deliver notifications from Home Assistant to your Telegram application(s).
+The **Telegram** {% term integration %} uses [Telegram](https://www.telegram.org) to deliver notifications from Home Assistant to your Telegram application(s).
 
 ## Setup example
 

diff --git a/source/_integrations/tellduslive.markdown b/source/_integrations/tellduslive.markdown
@@ -26,7 +26,7 @@ related:
     title: Configuration file
 ---
 
-The `tellduslive` {% term integration %} let you connect to the [Telldus Live](https://live.telldus.com) API. It's cloud platform that connects to your Tellstick Net or Tellstick ZNet connected gear at home.
+The **Telldus Live** {% term integration %} let you connect to the [Telldus Live](https://live.telldus.com) API. It's cloud platform that connects to your Tellstick Net or Tellstick ZNet connected gear at home.
 
 {% important %}
 You need a [Telldus Premium](https://telldus.com/en/telldus-premium/) subscription to access the Cloud API (https://telldus.com/en/important-announcement-english/).

diff --git a/source/_integrations/tellstick.markdown b/source/_integrations/tellstick.markdown
@@ -22,7 +22,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `tellstick` {% term integration %} integrates [TellStick][tellstick-gateway] devices into Home Assistant. This integration allows users to add switches, lights, and sensors which are communicating with 433 MHz. There are a number of vendors (Capidi Elro, Intertechno, Nexa, Proove, Sartano, and Viking) who are selling products that work with TellStick. For more details, please check the TellStick [protocol list](http://developer.telldus.com/wiki/TellStick_conf).
+The **TellStick** {% term integration %} integrates [TellStick][tellstick-gateway] devices into Home Assistant. This integration allows users to add switches, lights, and sensors which are communicating with 433 MHz. There are a number of vendors (Capidi Elro, Intertechno, Nexa, Proove, Sartano, and Viking) who are selling products that work with TellStick. For more details, please check the TellStick [protocol list](http://developer.telldus.com/wiki/TellStick_conf).
 
 There is currently support for the following device types within Home Assistant:
 

diff --git a/source/_integrations/telnet.markdown b/source/_integrations/telnet.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `telnet` switch {% term integration %} allows you to control devices with telnet commands.
+The **Telnet** {% term integration %} allows you to control devices with telnet commands.
 
 To enable this {% term integration %}, add the following lines to your {% term "`configuration.yaml`" %} file.
 {% include integrations/restart_ha_after_config_inclusion.md %}

diff --git a/source/_integrations/temper.markdown b/source/_integrations/temper.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-This `temper` sensor {% term integration %} allows you to get the current temperature from a TEMPer device.
+This **TEMPer** {% term integration %} allows you to get the current temperature from a TEMPer device.
 
 ## Configuration
 

diff --git a/source/_integrations/tesla_wall_connector.markdown b/source/_integrations/tesla_wall_connector.markdown
@@ -18,7 +18,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Tesla Wall Connector integration allows you to integrate your Gen 3 [Tesla Wall Connector](https://www.tesla.com/support/home-charging-installation/wall-connector) with Wi-Fi into Home Assistant.
+The **Tesla Wall Connector** {% term integration %} allows you to integrate your Gen 3 [Tesla Wall Connector](https://www.tesla.com/support/home-charging-installation/wall-connector) with Wi-Fi into Home Assistant.
 
 {% include integrations/config_flow.md %}
 

diff --git a/source/_integrations/teslemetry.markdown b/source/_integrations/teslemetry.markdown
@@ -38,7 +38,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Teslemetry {% term integration %} exposes various commands and sensors from the Tesla vehicles and energy sites connected to a [Teslemetry](https://teslemetry.com/) subscription.
+The **Teslemetry** {% term integration %} exposes various commands and sensors from the Tesla vehicles and energy sites connected to a [Teslemetry](https://teslemetry.com/) subscription.
 
 ## Prerequisites
 

diff --git a/source/_integrations/tessie.markdown b/source/_integrations/tessie.markdown
@@ -36,7 +36,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Tessie {% term integration %} exposes various commands and sensors from the Tesla vehicles and energy products connected to your [Tessie](https://tessie.com/) subscription.
+The **Tessie** {% term integration %} exposes various commands and sensors from the Tesla vehicles and energy products connected to your [Tessie](https://tessie.com/) subscription.
 
 ## Prerequisites
 

diff --git a/source/_integrations/tfiac.markdown b/source/_integrations/tfiac.markdown
@@ -18,7 +18,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `tfiac` {% term integration %} integrates several vendors air conditioning systems, that uses the Tfiac mobile app, into Home Assistant. App currently available at [Play Store](https://play.google.com/store/apps/details?id=com.tcl.export) and [App Store](https://apps.apple.com/app/id1059938398).
+The **Tfiac** {% term integration %} integrates several vendors air conditioning systems, that uses the Tfiac mobile app, into Home Assistant. App currently available at [Play Store](https://play.google.com/store/apps/details?id=com.tcl.export) and [App Store](https://apps.apple.com/app/id1059938398).
 
 ## Configuration
 

diff --git a/source/_integrations/thermoworks_smoke.markdown b/source/_integrations/thermoworks_smoke.markdown
@@ -12,7 +12,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-The `thermoworks_smoke` sensor platform pulls data for your [ThermoWorks Smoke Thermometer](https://www.thermoworks.com/Smoke).
+The **ThermoWorks Smoke** {% term integration %} pulls data for your [ThermoWorks Smoke Thermometer](https://www.thermoworks.com/Smoke).
 This requires a [Smoke WiFi Gateway](https://www.thermoworks.com/Smoke-Gateway) with an internet connection.
 
 You will need to have previously registered your smoke to your account via the mobile app and provide

diff --git a/source/_integrations/thethingsnetwork.markdown b/source/_integrations/thethingsnetwork.markdown
@@ -15,7 +15,7 @@ ha_integration_type: hub
 ha_config_flow: true
 ---
 
-The `thethingsnetwork` {% term integration%} allows you to interact with the [The Things Network](https://www.thethingsnetwork.org) from within Home Assistant. This community-driven and open network supports [LoRaWAN](https://www.lora-alliance.org/) for long-range (~5 to 15 km) communication with low bandwidth (51 bytes/message). [Gateways](https://www.thethingsnetwork.org/docs/gateways/) transfer the received data from the sensors to The Things Network.
+The **The Things Network** {% term integration%} allows you to interact with the [The Things Network](https://www.thethingsnetwork.org) from within Home Assistant. This community-driven and open network supports [LoRaWAN](https://www.lora-alliance.org/) for long-range (~5 to 15 km) communication with low bandwidth (51 bytes/message). [Gateways](https://www.thethingsnetwork.org/docs/gateways/) transfer the received data from the sensors to The Things Network.
 
 The Things Network supports various integrations to make the data available:
 

diff --git a/source/_integrations/thingspeak.markdown b/source/_integrations/thingspeak.markdown
@@ -10,7 +10,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-The `thingspeak` integrations makes Home Assistant communicate with the [ThingSpeak API](https://thingspeak.mathworks.com/).
+The **ThingSpeak** {% term integration %} makes Home Assistant communicate with the [ThingSpeak API](https://thingspeak.mathworks.com/).
 For now, it records exactly one entity at once, which is great for testing purposes. For long-time storage you should rely on the [InfluxDB integration](/integrations/influxdb/).
 
 ## Configuration

@@ -29,7 +29,7 @@ related:
     title: Enabling Thread on Yellow
 ---
 
-The Thread {% term integration %} helps you track the different Thread networks in your home and store the Thread network credentials (similar to a Wi-Fi password). The Thread integration in Home Assistant is currently still a work in progress.
+The **Thread** {% term integration %} helps you track the different Thread networks in your home and store the Thread network credentials (similar to a Wi-Fi password). The Thread integration in Home Assistant is currently still a work in progress.
 
 You do not need to install this integration. The Thread integration shows up automatically when Home Assistant detects a [border router](#about-thread-border-routers).
 

@@ -18,7 +18,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `tibber` integration provides a sensor with the current electricity price if you are a [Tibber](https://tibber.com/) customer.
+The **Tibber** {% term integration %} provides a sensor with the current electricity price if you are a [Tibber](https://tibber.com/) customer.
 If you have a [Tibber Pulse](https://tibber.com/no/store/produkt/pulse) or [Watty](https://tibber.com/se/store/produkt/watty-smart-energimatare) it will also show the electricity consumption in real-time. You get a sensor for monthly consumption, monthly cost, and monthly peak hour. If you do have a real-time meter it is updated once every hour, otherwise it is updated once per day. Statistics with hourly consumption and cost data is generated that can be used in the [Energy Dashboard](/docs/energy/) (the ids are `tibber:energy_consumption_HOMEID` and `tibber:energy_totalcost_HOMEID`). If you produce energy there are also statistics with hourly production and profit data generated which can also be used there (the ids are `tibber:energy_production_HOMEID` and `tibber:energy_profit_HOMEID`).
 
 There is currently support for the following device types within Home Assistant:

@@ -16,7 +16,7 @@ ha_platforms:
 ha_integration_type: hub
 ---
 
-The `tile` platform allows Home Assistant to utilize [Tile® Bluetooth trackers](https://www.thetileapp.com).
+The **Tile** {% term integration %} allows Home Assistant to utilize [Tile® Bluetooth trackers](https://www.thetileapp.com).
 The official Tile mobile app handles the actual tracking of Tile devices using
 the mobile device's Bluetooth and GPS.
 

@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: service
 ---
 
-The time and date (`time_date`) integration allows one to create sensors for the current date or time in different formats. All values are based on the timezone which is set in "General Configuration". 
+The **Time & Date** {% term integration %} allows one to create sensors for the current date or time in different formats. All values are based on the timezone which is set in "General Configuration". 
 
 {% include integrations/config_flow.md %}
 

diff --git a/source/_integrations/tmb.markdown b/source/_integrations/tmb.markdown
@@ -14,7 +14,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-This sensor will provide you the remaining time, in minutes, for the next bus in a specific stop by using the [iBus service](https://www.tmb.cat/en/barcelona/tmb-ibus).
+This {% term integration %} will provide you the remaining time, in minutes, for the next bus in a specific stop by using the [iBus service](https://www.tmb.cat/en/barcelona/tmb-ibus).
 
 You must create an application on [developer.tmb.cat](https://developer.tmb.cat/account/applications/public/new) to obtain the `app_id` and `app_key` values that you will need.
 

diff --git a/source/_integrations/todoist.markdown b/source/_integrations/todoist.markdown
@@ -29,7 +29,7 @@ related:
     title: Todoist projects
 ---
 
-This platform allows you to connect to your [Todoist projects](https://todoist.com) as [todo](/integrations/todo/) or [calendar](/integrations/calendar/) entities. All tasks get updated roughly every minute.
+This {% term integration %} allows you to connect to your [Todoist projects](https://todoist.com) as [todo](/integrations/todo/) or [calendar](/integrations/calendar/) entities. All tasks get updated roughly every minute.
 
 
 A calendar entity will be `on` if you have a task due in that project. It will be `off` if all the tasks in the project are completed or if the project doesn't have any tasks at all.

@@ -21,7 +21,7 @@ ha_codeowners:
 ha_quality_scale: bronze
 ---
 
-The ToGrill {% term integration %} allows you to connect your ToGrill compatible Bluetooth grill thermometer.
+The **ToGrill** {% term integration %} allows you to connect your ToGrill compatible Bluetooth grill thermometer.
 
 {% tip %}
 

diff --git a/source/_integrations/tolo.markdown b/source/_integrations/tolo.markdown
@@ -25,7 +25,7 @@ ha_dhcp: true
 ha_integration_type: integration
 ---
 
-The TOLO {% term integration %} allows to control [Steamtec TOLO](https://www.tolosauna.com/) devices with Home Assistant.
+The **TOLO Sauna** {% term integration %} allows to control [Steamtec TOLO](https://www.tolosauna.com/) devices with Home Assistant.
 
 
 ## Prerequisites

diff --git a/source/_integrations/tomato.markdown b/source/_integrations/tomato.markdown
@@ -12,7 +12,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-The `tomato` device tracker integration allows one to tracker devices which are
+The **Tomato** {% term integration %} allows one to tracker devices which are
 connected to a wireless router that is running [Tomato](https://tomato.groov.pl/)
 as firmware.
 

@@ -19,7 +19,7 @@ ha_platforms:
 ha_integration_type: service
 ---
 
-The Tomorrow.io {% term integration %} allows you to obtain weather, air quality, pollen, and fire information from the [Tomorrow.io API](https://www.tomorrow.io/weather-api/).
+The **Tomorrow.io** {% term integration %} allows you to obtain weather, air quality, pollen, and fire information from the [Tomorrow.io API](https://www.tomorrow.io/weather-api/).
 
 ## Obtain an API key
 

diff --git a/source/_integrations/toon.markdown b/source/_integrations/toon.markdown
@@ -20,7 +20,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Toon {% term integration %} platform can be used to control your Quby Toon thermostat,
+The **Toon** {% term integration %} platform can be used to control your Quby Toon thermostat,
 which is currently being sold as:
 
 - Eneco Toon

diff --git a/source/_integrations/torque.markdown b/source/_integrations/torque.markdown
@@ -12,7 +12,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-The `torque` platform will allow you to monitor [Torque](https://torque-bhp.com/) data relayed from a Bluetooth OBD2 stick via the Torque mobile application.
+The **Torque** {% term integration %} will allow you to monitor [Torque](https://torque-bhp.com/) data relayed from a Bluetooth OBD2 stick via the Torque mobile application.
 
 ## Setup
 

diff --git a/source/_integrations/totalconnect.markdown b/source/_integrations/totalconnect.markdown
@@ -19,7 +19,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `totalconnect` {% term integration %} provides connectivity with Resideo Total Connect 2.0-enabled alarm systems.
+The **Total Connect** {% term integration %} provides connectivity with Resideo Total Connect 2.0-enabled alarm systems.
 
 The integration allows automations based on the state of the alarm system. For example: when the alarm is armed, turn on the outside light.
 

diff --git a/source/_integrations/tplink_omada.markdown b/source/_integrations/tplink_omada.markdown
@@ -19,7 +19,7 @@ ha_platforms:
 ha_integration_type: hub
 ---
 
-The TP-Link Omada SDN Controller integration allows you to control your [TP-Link Omada SDN Devices](https://www.tp-link.com/omada-sdn/) such as network switches, access points, and internet gateways.
+The **TP-Link Omada** {% term integration %} allows you to control your [TP-Link Omada SDN Devices](https://www.tp-link.com/omada-sdn/) such as network switches, access points, and internet gateways.
 
 The integration provides basic configuration and status of Omada devices controlled by the controller. All supported devices connected to the controller will be added to Home Assistant.