home-assistant · klaasnicolaas · Dec 28, 2025 · Dec 28, 2025 · Dec 28, 2025 · Dec 28, 2025
@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The OwnTone integration allows you to control your [OwnTone (previously forked-daapd)](https://github.com/owntone/owntone-server) server from Home Assistant. This integration can control the OwnTone outputs (zones) with limited playback control (play/pause, previous/next track) and media info support. Playlist manipulation is not supported.
+The **OwnTone** {% term integration %} allows you to control your [OwnTone (previously forked-daapd)](https://github.com/owntone/owntone-server) server from Home Assistant. This integration can control the OwnTone outputs (zones) with limited playback control (play/pause, previous/next track) and media info support. Playlist manipulation is not supported.
 
 ## Requirements
 

diff --git a/source/_integrations/norway_air.markdown b/source/_integrations/norway_air.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `norway_air` {% term integration %} [queries](https://luftkvalitet.miljostatus.no/) the Norway air quality [data feed](https://api.met.no/weatherapi/airqualityforecast/0.1/documentation) provided by the Norwegian Meteorological Institute.
+The **Norway Air** {% term integration %} [queries](https://luftkvalitet.miljostatus.no/) the Norway air quality [data feed](https://api.met.no/weatherapi/airqualityforecast/0.1/documentation) provided by the Norwegian Meteorological Institute.
 
 To add the air quality {% term integration %} to your installation, add the following to your {% term "`configuration.yaml`" %} file.
 {% include integrations/restart_ha_after_config_inclusion.md %}

@@ -17,7 +17,7 @@ ha_integration_type: integration
 ha_dhcp: true
 ---
 
-The `obihai` integration allows you to view the call status for your [Obihai devices](https://www.obitalk.com/info/products#home_section).
+The **Obihai** {% term integration %} allows you to view the call status for your [Obihai devices](https://www.obitalk.com/info/products#home_section).
 
 {% include integrations/config_flow.md %}
 

@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `ohmconnect` {% term integration %} will show you the current [OhmConnect](https://www.ohmconnect.com/) status for the given OhmConnect ID.
+The **OhmConnect** {% term integration %} will show you the current [OhmConnect](https://www.ohmconnect.com/) status for the given OhmConnect ID.
 
 OhmConnect monitors real-time conditions on the electricity grid. When dirty and unsustainable power plants turn on, our users receive a notification to save energy. By saving energy at that time, California does not have to turn on additional power plants and California's energy authorities pay you for that.
 

diff --git a/source/_integrations/ombi.markdown b/source/_integrations/ombi.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The Ombi integration monitors data from your [Ombi](https://ombi.io) instance.
+The **Ombi** {% term integration %} monitors data from your [Ombi](https://ombi.io) instance.
 
 ## Setup
 

@@ -17,7 +17,7 @@ ha_ssdp: true
 ha_quality_scale: bronze
 ---
 
-The `onkyo` {% term integration %} allows you to control [Onkyo](https://www.onkyo.com) and [Integra](http://www.integrahometheater.com) (from 2011 onward) and also [Pioneer](https://www.pioneerelectronics.com) (from 2016 onward) receivers using Home Assistant.
+The **Onkyo** {% term integration %} allows you to control [Onkyo](https://www.onkyo.com) and [Integra](http://www.integrahometheater.com) (from 2011 onward) and also [Pioneer](https://www.pioneerelectronics.com) (from 2016 onward) receivers using Home Assistant.
 Please be aware that you need to enable "Network Standby" for this integration to work with your hardware.
 
 {% include integrations/config_flow.md %}

diff --git a/source/_integrations/onvif.markdown b/source/_integrations/onvif.markdown
@@ -22,7 +22,7 @@ ha_integration_type: integration
 ha_dhcp: true
 ---
 
-The ONVIF camera integration allows you to use an [ONVIF](https://www.onvif.org/) Profile S conformant device in Home Assistant. This requires the [`ffmpeg` integration](/integrations/ffmpeg/) to be already configured.
+The **ONVIF** {% term integration %} allows you to use an [ONVIF](https://www.onvif.org/) Profile S conformant device in Home Assistant. This requires the [`ffmpeg` integration](/integrations/ffmpeg/) to be already configured.
 
 {% include integrations/config_flow.md %}
 

@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: service
 ---
 
-The Open-Meteo {% term integration %} integrates the free weather forecast from
+The **Open-Meteo** {% term integration %} integrates the free weather forecast from
 [Open-Meteo](https://open-meteo.com) with Home Assistant.
 
 Open-Meteo offers free weather forecast APIs for open-source developers and

@@ -22,7 +22,7 @@ related:
     title: OpenAI
 ---
 
-The OpenAI {% term integration %} adds a conversation agent powered by [OpenAI](https://www.openai.com) in Home Assistant.
+The **OpenAI** {% term integration %} adds a conversation agent powered by [OpenAI](https://www.openai.com) in Home Assistant.
 
 Controlling Home Assistant is done by providing the AI access to the Assist API of Home Assistant. You can control what devices and entities it can access from the {% my voice_assistants title="exposed entities page" %}. The AI is able to provide you information about your devices and control them.
 

diff --git a/source/_integrations/openerz.markdown b/source/_integrations/openerz.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-This `openerz` sensor {% term integration %} uses [OpenERZ](http://openerz.metaodi.ch/) API to access data from Entsorgung und Recycling Zürich (ERZ). It reports the next pickup date for the specified zip and waste type.
+The **Open ERZ** {% term integration %} uses [OpenERZ](http://openerz.metaodi.ch/) API to access data from Entsorgung und Recycling Zürich (ERZ). It reports the next pickup date for the specified zip and waste type.
 
 ## Configuration
 

diff --git a/source/_integrations/openevse.markdown b/source/_integrations/openevse.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-This `openevse` sensor {% term integration %} pulls data from an [OpenEVSE](https://www.openevse.com/) Charging station equipped with an ESP8266-based Wi-Fi connection.
+The **OpenEVSE** {% term integration %} pulls data from an [OpenEVSE](https://www.openevse.com/) Charging station equipped with an ESP8266-based Wi-Fi connection.
 
 ## Configuration
 

@@ -14,7 +14,7 @@ ha_codeowners:
   - '@MartinHjelmare'
 ---
 
-The Open Exchange Rates {% term integration %} will show you the current exchange rate from [Open Exchange Rates](https://openexchangerates.org) that provides real-time exchange rates for [170 currencies](https://openexchangerates.org/currencies). The free account is limited to only USD as a base currency, allows 1000 requests per month, and updates every hour.
+The **Open Exchange Rates** {% term integration %} will show you the current exchange rate from [Open Exchange Rates](https://openexchangerates.org) that provides real-time exchange rates for [170 currencies](https://openexchangerates.org/currencies). The free account is limited to only USD as a base currency, allows 1000 requests per month, and updates every hour.
 
 Obtain your API key [here](https://openexchangerates.org/signup)
 

@@ -18,7 +18,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The OpenGarage {% term integration %} lets you control the open-source [OpenGarage.io](https://opengarage.io/) device through Home Assistant.
+The **OpenGarage** {% term integration %} lets you control the open-source [OpenGarage.io](https://opengarage.io/) device through Home Assistant.
 
 
 {% include integrations/config_flow.md %}
diff --git a/source/_integrations/openhardwaremonitor.markdown b/source/_integrations/openhardwaremonitor.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `openhardwaremonitor` {% term integration %} uses your [Open Hardware Monitor](https://openhardwaremonitor.org/) installation as a source for sensors that will display system information.
+The **Open Hardware Monitor** {% term integration %} uses your [Open Hardware Monitor](https://openhardwaremonitor.org/) installation as a source for sensors that will display system information.
 
 ## Setup
 

@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `opensensemap` air quality {% term integration %} will query the open data API of [openSenseMap.org](https://opensensemap.org/) to monitor air quality sensor station.
+The **openSenseMap** {% term integration %} will query the open data API of [openSenseMap.org](https://opensensemap.org/) to monitor air quality sensor station.
 
 ## Setup
 

@@ -14,7 +14,7 @@ ha_codeowners:
 ha_config_flow: true
 ---
 
-The OpenSky {% term integration %} allows one to track overhead flights in a given region. It uses crowd-sourced data from the [OpenSky Network](https://opensky-network.org/) public API. It will also fire Home Assistant events when flights enter and exit the defined region.
+The **OpenSky** {% term integration %} allows one to track overhead flights in a given region. It uses crowd-sourced data from the [OpenSky Network](https://opensky-network.org/) public API. It will also fire Home Assistant events when flights enter and exit the defined region.
 
 {% include integrations/config_flow.md %}
 

diff --git a/source/_integrations/opentherm_gw.markdown b/source/_integrations/opentherm_gw.markdown
@@ -24,7 +24,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `opentherm_gw` {% term integration %} is used to control the [OpenTherm Gateway](https://otgw.tclcode.com/) from Home Assistant.
+The **OpenTherm Gateway** {% term integration %} is used to control the [OpenTherm Gateway](https://otgw.tclcode.com/) from Home Assistant.
 
 This integration will add three devices to Home Assistant for each configured gateway. The main control of the integration is a single `climate` entity which can be found on the added `OpenTherm Thermostat` device. All added devices have a collection of `sensor` and `binary_sensor` entities, which are disabled by default. To enable them, follow the steps on [enabling entities](/common-tasks/general/#enabling-or-disabling-entities).
 

@@ -18,7 +18,7 @@ ha_platforms:
 ha_integration_type: service
 ---
 
-The OpenUV {% term integration %} displays UV and Ozone data from [openuv.io](https://www.openuv.io/).
+The **OpenUV** {% term integration %} displays UV and Ozone data from [openuv.io](https://www.openuv.io/).
 
 {% warning %}
 The guidelines within this documentation constitute estimates which are intended to help

@@ -22,7 +22,7 @@ related:
     title: Defining a custom polling interval
 ---
 
-The OpenWeatherMap weather {% term integration %} uses [OpenWeatherMap](https://openweathermap.org/) as a source for meteorological and air quality data for your location.
+The **OpenWeatherMap** {% term integration %} uses [OpenWeatherMap](https://openweathermap.org/) as a source for meteorological and air quality data for your location.
 
 There is currently support for the following device types within Home Assistant:
 

@@ -16,7 +16,7 @@ ha_integration_type: integration
 ha_quality_scale: bronze
 ---
 
-The Opower {% term integration %} allows you to get energy information from utilities that use [Opower](https://www.oracle.com/industries/utilities/opower-energy-efficiency/).
+The **Opower** {% term integration %} allows you to get energy information from utilities that use [Opower](https://www.oracle.com/industries/utilities/opower-energy-efficiency/).
 
 More than 175 utilities use Opower. Currently only the following utilities are supported by this integration:
 

diff --git a/source/_integrations/opple.markdown b/source/_integrations/opple.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `opple` light {% term integration %} allows you to control the state of your Opple smart light.
+The **Opple** {% term integration %} allows you to control the state of your Opple smart light.
 
 The platform supports all Opple lights with Wi-Fi support or lights that can be controlled by the App.
 

diff --git a/source/_integrations/oru.markdown b/source/_integrations/oru.markdown
@@ -18,7 +18,7 @@ ha_quality_scale: legacy
 ---
 
 [Orange and Rockland Utility](https://oru.com) is an energy provider in NY and NJ, USA.
-The `oru` sensor {% term integration %} fetches your current energy usage from your ORU smart meter.
+The **ORU** {% term integration %} fetches your current energy usage from your ORU smart meter.
 
 ## Configuration
 

diff --git a/source/_integrations/orvibo.markdown b/source/_integrations/orvibo.markdown
@@ -16,7 +16,7 @@ ha_quality_scale: legacy
 Please be aware that the product ORVIBO WIFI SMART SOCKET S20 (LGS-20) has been recalled by the European authorities due to safety concerns. For more information, please visit [RAPEX information](https://ec.europa.eu/consumers/consumers_safety/safety_products/rapex/alerts/?event=viewProduct&reference=A12/1577/15&lng=en).
 {% endcaution %}
 
-The `orvibo` switch platform allows you to toggle your Orvibo S20 Wifi Smart Sockets.
+The **Orvibo** {% term integration %} allows you to toggle your Orvibo S20 Wifi Smart Sockets.
 
 To automatically discover Orvibo sockets on your network:
 

diff --git a/source/_integrations/osoenergy.markdown b/source/_integrations/osoenergy.markdown
@@ -18,7 +18,7 @@ ha_config_flow: true
 ha_integration_type: integration
 ---
 
-The OSO Energy {% term integration %} for Home Assistant allows you to interact with supported devices and services offered by [OSO Energy](https://www.osoenergy.no)
+The **OSO Energy** {% term integration %} for Home Assistant allows you to interact with supported devices and services offered by [OSO Energy](https://www.osoenergy.no)
 
 This OSO Energy integration uses a subscription key, which a user can create for his account on the [OSO Energy website](https://portal.osoenergy.no/), to configure it within Home Assistant. Once configured Home Assistant will detect and add all OSO Energy devices.
 

diff --git a/source/_integrations/osramlightify.markdown b/source/_integrations/osramlightify.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `osramlightify` {% term integration %} allows you to integrate your [Osram Lightify](https://www.osram.com/cb/lightify/index.jsp) into Home Assistant.
+The **Osramlightify** {% term integration %} allows you to integrate your [Osram Lightify](https://www.osram.com/cb/lightify/index.jsp) into Home Assistant.
 
 To enable the {% term integration %}, add it to your {% term "`configuration.yaml`" %} file.
 {% include integrations/restart_ha_after_config_inclusion.md %}

@@ -11,7 +11,7 @@ ha_integration_type: service
 ha_config_flow: true
 ---
 
-The Open Thread Border Router {% term integration %} allows calling an Open Thread Border Router's REST API from Python and via WebSocket.
+The **Open Thread Border Router** {% term integration %} allows calling an Open Thread Border Router's REST API from Python and via WebSocket.
 
 This integration is installed automatically when the **Open Thread Border Router** add-on is installed. For Home Assistant Yellow, Connect&nbsp;ZBT-1, or Connect&nbsp;ZBT-2 refer to the following procedures:
 

diff --git a/source/_integrations/otp.markdown b/source/_integrations/otp.markdown
@@ -17,7 +17,7 @@ related:
     title: Configuration file
 ---
 
-The `otp` {% term integration %} generates One-Time Passwords according to [RFC6238](https://tools.ietf.org/html/rfc6238) that is compatible with most OTP generators available, including Google Authenticator. You can use this when building custom security solutions and want to use "rolling codes", that change every 30 seconds.
+The **One-Time Password (OTP)** {% term integration %} generates One-Time Passwords according to [RFC6238](https://tools.ietf.org/html/rfc6238) that is compatible with most OTP generators available, including Google Authenticator. You can use this when building custom security solutions and want to use "rolling codes", that change every 30 seconds.
 
 {% include integrations/config_flow.md %}
 

@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: service
 ---
 
-The `ovo_energy` integration allows you to monitor your energy consumption data
+The **OVO Energy** {% term integration %} allows you to monitor your energy consumption data
 in Home Assistant.
 
 Currently, this integration only supports OVO Energy in the UK.