Time-based templates update automatically now

source/_docs/configuration/templating.markdown

@@ -174,8 +174,10 @@ The same thing can also be expressed as a filter:
 
 - `now()` returns a datetime object that represents the current time in your time zone.
   - You can also use: `now().second`, `now().minute`, `now().hour`, `now().day`, `now().month`, `now().year`, `now().weekday()` and `now().isoweekday()` and other [`datetime`](https://docs.python.org/3.8/library/datetime.html#datetime.datetime) attributes and functions.
+  - Using `now()` will cause templates to be refreshed at the start of every new minute.
 - `utcnow()` returns a datetime object of the current time in the UTC timezone.
   - For specific values: `utcnow().second`, `utcnow().minute`, `utcnow().hour`, `utcnow().day`, `utcnow().month`, `utcnow().year`, `utcnow().weekday()` and `utcnow().isoweekday()`.
+  - Using `utcnow()` will cause templates to be refreshed at the start of every new minute.
 - `as_timestamp()` converts datetime object or string to UNIX timestamp. This function also be used as a filter.
 - `as_local()` converts datetime object to local time. This function also be used as a filter.
 - `strptime(string, format)` parses a string based on a [format](https://docs.python.org/3.8/library/datetime.html#strftime-and-strptime-behavior) and returns a datetime object.
@@ -460,10 +462,6 @@ To evaluate a response, go to **Developer Tools** -> **Template**, create your o
 
 If your template uses an `entity_id` that begins with a number (example: `states.device_tracker.2008_gmc`) you must use a bracket syntax to avoid errors caused by rendering the `entity_id` improperly. In the example given, the correct syntax for the device tracker would be: `states.device_tracker['2008_gmc']`
 
-### Templates without entities using `now()`
-
-Note that templates that depend on time (`now()`) and do not use any entities will not be updated as it only happens on entity state changes. For more information and examples refer to [`template` sensor documentation](/integrations/template/#working-without-entities)
-
 ### Priority of operators
 
 The default priority of operators is that the filter (`|`) has priority over everything except brackets. This means that:

source/_integrations/alarm_control_panel.template.markdown

@@ -108,7 +108,3 @@ panels:
 If you are using the state of a integration that takes extra time to load, the Template Alarm Control Panel may get an `unknown` state during startup. This results in error messages in your log file until that integration has completed loading. If you use `is_state()` function in your template, you can avoid this situation.
 
 For example, you would replace {% raw %}`{{ states.switch.source.state == 'on' }}`{% endraw %} with this equivalent that returns `true`/`false` and never gives an unknown result: {% raw %}`{{ is_state('switch.source', 'on') }}`{% endraw %}
-
-### Working without entities
-
-If you use a template that depends on the current time or some other non-deterministic result not sourced from entities, the template won't repeatedly update but will only update when the state of a referenced entity updates. For ways to deal with this issue, see [Working without entities](/integrations/binary_sensor.template/#working-without-entities) in the Template Binary Sensor integration.

source/_integrations/binary_sensor.template.markdown

@@ -106,13 +106,6 @@ with this equivalent that returns `true`/`false` and never gives an unknown
 result:
 {% raw %}`{{ is_state('switch.source', 'on') }}`{% endraw %}
 
-### Sensor state updates
-
-The template engine works out what entities are used to trigger an update of the sensor and recalculates the result when one of those entities change.
-
-If you use a template that depends on the current time or some other non-deterministic result not sourced from entities, create an interval-based
-automation that calls the service `homeassistant.update_entity` for the sensor requiring updates. See the [example below](#working-without-entities).
-
 ## Examples
 
 In this section you find some real-life examples of how to use this sensor.
@@ -322,82 +315,3 @@ binary_sensor:
 {% endraw %}
 
 If the template accesses every state on the system, a rate limit of one update per minute is applied. If the template accesses all states under a specific domain, a rate limit of one update per second is applied. If the template only accesses specific states, receives update events for specifically referenced entities, or the `homeassistant.update_entity` service is used, no rate limit is applied.
-
-### Working without entities
-
-The `template` sensors are not limited to use attributes from other entities but can also work with [Home Assistant's template extensions](/docs/configuration/templating/#home-assistant-template-extensions). If the template includes some non-deterministic property such as time in its calculation, the result will not continually update, but will only update when some entity referenced by the template updates.
-
-There's a couple of options to manage this issue. This first example creates a `sensor.time` from the [Time & Date](/integrations/time_date/) component which updates every minute, and the binary sensor is triggered by this updating. The binary sensor returns true if in the first half of the hour:
-
-{% raw %}
-```yaml
-sensor:
-  - platform: time_date
-    display_options:
-      - 'time'
-
-binary_sensor:
-  - platform: template
-    sensors:
-      half_hour:
-        value_template: '{{ (states("sensor.time")[3:] | int) < 30 }}'
-```
-{% endraw %}
-
-An alternative to this is to create an interval-based automation that calls the service `homeassistant.update_entity` for the entities requiring updates:
-
-{% raw %}
-```yaml
-binary_sensor:
-- platform: template
-  sensors:
-    half_hour:
-      value_template: '{{ now().minute < 30 }}'
-
-automation:
-  - alias: 'Update half_hour'
-    trigger:
-      - platform: time_pattern
-        minutes: /30
-    action:
-      - service: homeassistant.update_entity
-        entity_id: binary_sensor.half_hour
-```
-{% endraw %}
-
-In the case where the template should be updated every minute, just reading `states("sensor.time")` can achieve the desired result without the need to create an automation:
-
-{% raw %}
-```yaml
-sensor:
-  - platform: time_date
-    display_options:
-      - 'time'
-
-binary_sensor:
-- platform: template
-  sensors:
-    minute_is_odd:
-      value_template: >-
-        {% set dummy = states("sensor.time") %}
-        {{ now().minute % 2 == 1 }}
-```
-{% endraw %}
-
-A similar trick of ignoring the sensor value can be used with `states("sensor.date")` for templates that should update at midnight.
-The `time_date` sensors are always true so here we use `and` to ignore the result in a more condensed way:
-
-{% raw %}
-```yaml
-sensor:
-  - platform: time_date
-    display_options:
-      - 'date'
-
-binary_sensor:
-- platform: template
-  sensors:
-    weekend:
-      value_template: {{ states("sensor.date") and now().isoweekday() > 5 }}
-```
-{% endraw %}

source/_integrations/cover.template.markdown

@@ -126,10 +126,6 @@ with this equivalent that returns `true`/`false` and never gives an unknown
 result:
 {% raw %}`{{ is_state('cover.source', 'open') }}`{% endraw %}
 
-### Working without entities
-
-If you use a template that depends on the current time or some other non-deterministic result not sourced from entities, the template won't repeatedly update but will only update when the state of a referenced entity updates. For ways to deal with this issue, see [Working without entities](/integrations/binary_sensor.template/#working-without-entities) in the Template Binary Sensor integration.
-
 ## Optimistic Mode
 
 In optimistic mode, the cover position state is maintained internally. This mode

source/_integrations/fan.template.markdown

@@ -114,7 +114,3 @@ fan:
         type: [string, list]
         default: ['low', 'medium', 'high']
 {% endconfiguration %}
-
-### Working without entities
-
-If you use a template that depends on the current time or some other non-deterministic result not sourced from entities, the template won't repeatedly update but will only update when the state of a referenced entity updates. For ways to deal with this issue, see [Working without entities](/integrations/binary_sensor.template/#working-without-entities) in the Template Binary Sensor integration.

source/_integrations/light.template.markdown

@@ -146,10 +146,6 @@ with this equivalent that returns `true`/`false` and never gives an unknown
 result:
 {% raw %}`{{ is_state('switch.source', 'on') }}`{% endraw %}
 
-### Working without entities
-
-If you use a template that depends on the current time or some other non-deterministic result not sourced from entities, the template won't repeatedly update but will only update when the state of a referenced entity updates. For ways to deal with this issue, see [Working without entities](/integrations/binary_sensor.template/#working-without-entities) in the Template Binary Sensor integration.
-
 ## Examples
 
 In this section you will find some real-life examples of how to use this light.

source/_integrations/lock.template.markdown

@@ -79,10 +79,6 @@ lock:
 
 If you are using the state of a platform that takes extra time to load, the Template Lock may get an `unknown` state during startup. This results in error messages in your log file until that platform has completed loading. If you use `is_state()` function in your template, you can avoid this situation. For example, you would replace {% raw %}`{{ is_state('switch.source', 'on') }}`{% endraw %} with this equivalent that returns `true`/`false` and never gives an unknown result: {% raw %}`{{ is_state('switch.source', 'on') }}`{% endraw %}
 
-### Working without entities
-
-If you use a template that depends on the current time or some other non-deterministic result not sourced from entities, the template won't repeatedly update but will only update when the state of a referenced entity updates. For ways to deal with this issue, see [Working without entities](/integrations/binary_sensor.template/#working-without-entities) in the Template Binary Sensor integration.
-
 ## Examples
 
 In this section, you find some real-life examples of how to use this lock.

source/_integrations/switch.template.markdown

@@ -86,10 +86,6 @@ switch:
 
 If you are using the state of a platform that takes extra time to load, the Template Switch may get an `unknown` state during startup. This results in error messages in your log file until that platform has completed loading. If you use `is_state()` function in your template, you can avoid this situation. For example, you would replace {% raw %}`{{ states.switch.source.state == 'on') }}`{% endraw %} with this equivalent that returns `true`/`false` and never gives an unknown result: {% raw %}`{{ is_state('switch.source', 'on') }}`{% endraw %}
 
-### Working without entities
-
-If you use a template that depends on the current time or some other non-deterministic result not sourced from entities, the template won't repeatedly update but will only update when the state of a referenced entity updates. For ways to deal with this issue, see [Working without entities](/integrations/binary_sensor.template/#working-without-entities) in the Template Binary Sensor integration.
-
 ## Examples
 
 In this section you find some real-life examples of how to use this switch.

source/_integrations/template.markdown

@@ -321,7 +321,7 @@ sensor:
 
 The `template` sensors are not limited to use attributes from other entities but can also work with [Home Assistant's template extensions](/docs/configuration/templating/#home-assistant-template-extensions).
 
-This template contains no entities that will trigger an update, so we add in a reference to the `sensor.date` sensor from the [Time & Date](/integrations/time_date/), which will update once a day.
+This template contains no entities that will trigger an update but the `now()` will cause it to update every minute:
 
 {% raw %}
 
@@ -333,53 +333,9 @@ sensor:
   - platform: template
     sensors:
       nonsmoker:
-        value_template: '{{ states('sensor.date') and (( as_timestamp(now()) - as_timestamp(strptime("06.07.2018", "%d.%m.%Y")) ) / 86400 ) | round(2) }}'
+        value_template: '{{ ( ( as_timestamp(now()) - as_timestamp(strptime("06.07.2018", "%d.%m.%Y")) ) / 86400 ) | round(2) }}'
         friendly_name: 'Not smoking'
         unit_of_measurement: "Days"
 ```
 
 {% endraw %}
-
-In this case it is also possible to convert the entity-less template above into one that will be updated automatically:
-
-{% raw %}
-
-````yaml
-sensor:
-  - platform: template
-    sensors:
-      nonsmoker:
-        value_template: "{{ (( as_timestamp(strptime(states('sensor.date'), '%Y-%m-%d')) - as_timestamp(strptime('06.07.2018', '%d.%m.%Y')) ) / 86400 ) | round(2) }}"
-        friendly_name: 'Not smoking'
-        unit_of_measurement: "Days"
-````
-
-{% endraw %}
-
-Useful entities to choose might be `sensor.date` which update once per day or `sensor.time`, which updates once per minute.  
-Please note that the resulting template will be evaluated by Home Assistant state engine on every state change of these sensors, which in case of `sensor.time` happens every minute and might have a negative impact on performance.
-
-An alternative to this is to create an interval-based automation that calls the service `homeassistant.update_entity` for the entities requiring updates. This modified example updates every 5 minutes:
-
-{% raw %}
-
-```yaml
-sensor:
-  - platform: template
-    sensors:
-      nonsmoker:
-        value_template: '{{ (( as_timestamp(now()) - as_timestamp(strptime("06.07.2018", "%d.%m.%Y")) ) / 86400 ) | round(2) }}'
-        friendly_name: 'Not smoking'
-        unit_of_measurement: "Days"
-
-automation:
-  - alias: 'nonsmoker_update'
-    trigger:
-      - platform: time_pattern
-        minutes: '/5'
-    action:
-      - service: homeassistant.update_entity
-        entity_id: sensor.nonsmoker
-```
-
-{% endraw %}

source/_integrations/vacuum.template.markdown

@@ -103,10 +103,6 @@ vacuum:
         type: [string, list]
 {% endconfiguration %}
 
-### Working without entities
-
-If you use a template that depends on the current time or some other non-deterministic result not sourced from entities, the template won't repeatedly update but will only update when the state of a referenced entity updates. For ways to deal with this issue, see [Working without entities](/integrations/template/#working-without-entities) in the Template Sensor integration.
-
 ## Examples
 
 ### Control vacuum with Harmony Hub