Update config to new Samsung TV integration

source/_integrations/samsungtv.markdown

@@ -6,6 +6,7 @@ ha_category:
   - Media Player
 ha_release: 0.13
 ha_iot_class: Local Polling
+ha_config_flow: true
 ha_codeowners:
   - '@escoand'
 ---
@@ -14,49 +15,57 @@ The `samsungtv` platform allows you to control a [Samsung Smart TV](https://www.
 
 ### Setup
 
+Go to the integrations page in your config and click on new integration -> Samsung TV.
+If you have enabled [ssdp](/integrations/ssdp) discovery and your TV is on, it's likely that you just have to confirm the detected device.
+
 When the TV is first connected, you will need to accept Home Assistant on the TV to allow communication.
 
-### Configuration
+### YAML Configuration
 
-To add a TV to your installation without relying on the [discovery component](/integrations/discovery/), add the following to your `configuration.yaml` file:
+YAML configuration is around for people that prefer YAML.
+To use a TV add the following to your `configuration.yaml` file:
 
 ```yaml
 # Example configuration.yaml entry
-media_player:
-  - platform: samsungtv
-    host: IP_ADDRESS
+samsungtv:
+  - host: IP_ADDRESS
 ```
 
 {% configuration %}
 host:
-  description: "The IP of the Samsung Smart TV, e.g., `192.168.0.10`."
+  description: "The hostname or IP of the Samsung Smart TV, e.g., `192.168.0.10`."
   required: true
   type: string
 port:
   description: The port of the Samsung Smart TV. If set to 8001, the new websocket connection will be used (required for 2016+ TVs) - for installs other than Hass.io or Docker you may need to install a Python package, see below.
   required: false
   type: integer
-  default: 55000
+  default: automatically detected
 name:
   description: The name you would like to give to the Samsung Smart TV.
   required: false
   type: string
-timeout:
-  description: The timeout for communication with the TV in seconds.
-  required: false
-  type: time
-  default: 0 (no timeout)
-mac:
-  description: "The MAC address of the Samsung Smart TV, e.g., `00:11:22:33:44:55:66`. Required for power on support via wake on lan."
-  required: false
-  type: string
-broadcast_address:
-  description: The broadcast address on which to send the Wake-On-Lan packet.
+turn_on_action:
+  description: "Defines an [action](/docs/automation/action/) to turn the TV on."
   required: false
-  default: 255.255.255.255
-  type: string
+  type: list
 {% endconfiguration %}
 
+#### Wake up TV
+
+To wake up the TV when switched off you can use the [wake-on-lan](/integrations/wake_on_lan/) integration and call a service. This is not possible with every device.
+
+```yaml
+wake_on_lan:
+
+samsungtv:
+  - host: IP_ADDRESS
+    turn_on_action:
+      - service: wake_on_lan.send_magic_packet
+        data:
+          mac: "11:22:33:44:55:66"
+```
+
 ### Supported models
 
 If your model is not on the list then give it a test, if everything works correctly then add it to the list on [GitHub](https://github.com/home-assistant/home-assistant.io/tree/current/source/_integrations/samsungtv.markdown).
@@ -147,16 +156,14 @@ None of the 2014 (H) and 2015 (J) model series (e.g., J5200) will work, since Sa
 Changing channels can be done by calling the `media_player.play_media` service
 with the following payload:
 
-```javascript
-{
-  "entity_id": "media_player.office_tv",
-  "media_content_id": "590",
-  "media_content_type": "channel"
-}
+```yaml
+entity_id: media_player.samsung_tv
+media_content_id: 590
+media_content_type: channel
 ```
 #### Selecting a source
 
-Source selection is not yet implemented.
+It's possible to switch between the 2 sources `TV` and `HDMI`.
 
 ### Hass.io
 

source/_integrations/ssdp.markdown

@@ -27,3 +27,4 @@ The following integrations are automatically discovered by the SSDP integration:
  - [deCONZ](../deconz/)
  - [Huawei LTE](../huawei_lte/)
  - [Philips Hue](../hue/)
+ - [Samsung TV](../samsungtv/)