Add support for Bosch BMP280 Sensor

.coveragerc

@@ -75,6 +75,7 @@ omit =
     homeassistant/components/bluetooth_tracker/*
     homeassistant/components/bme280/sensor.py
     homeassistant/components/bme680/sensor.py
+    homeassistant/components/bmp280/sensor.py
     homeassistant/components/bmw_connected_drive/*
     homeassistant/components/bom/camera.py
     homeassistant/components/bom/sensor.py

CODEOWNERS

@@ -52,6 +52,7 @@ homeassistant/components/beewi_smartclim/* @alemuro
 homeassistant/components/bitcoin/* @fabaff
 homeassistant/components/bizkaibus/* @UgaitzEtxebarria
 homeassistant/components/blink/* @fronzbot
+homeassistant/components/bmp280/* @belidzs
 homeassistant/components/bmw_connected_drive/* @gerard33
 homeassistant/components/bom/* @maddenp
 homeassistant/components/braviatv/* @robbiet480

homeassistant/components/bmp280/__init__.py

@@ -0,0 +1 @@
+"""The Bosch BMP280 sensor integration."""

homeassistant/components/bmp280/manifest.json

@@ -0,0 +1,9 @@
+{
+  "domain": "bmp280",
+  "name": "Bosch BMP280 Environmental Sensor",
+  "documentation": "https://www.home-assistant.io/integrations/bmp280",
+  "dependencies": [],
+  "codeowners": ["@belidzs"],
+  "requirements": ["adafruit-circuitpython-bmp280==3.1.1", "RPi.GPIO==0.7.0"],
+  "quality_scale": "silver"
+}

homeassistant/components/bmp280/sensor.py

@@ -0,0 +1,158 @@
+"""Platform for Bosch BMP280 Environmental Sensor integration."""
+from datetime import timedelta
+import logging
+
+from adafruit_bmp280 import Adafruit_BMP280_I2C
+import board
+from busio import I2C
+import voluptuous as vol
+
+from homeassistant.components.sensor import (
+    DEVICE_CLASS_PRESSURE,
+    DEVICE_CLASS_TEMPERATURE,
+    PLATFORM_SCHEMA,
+)
+from homeassistant.const import CONF_NAME, PRESSURE_HPA, TEMP_CELSIUS
+from homeassistant.exceptions import PlatformNotReady
+import homeassistant.helpers.config_validation as cv
+from homeassistant.helpers.entity import Entity
+from homeassistant.util import Throttle
+
+_LOGGER = logging.getLogger(__name__)
+
+DEFAULT_NAME = "BMP280"
+DEFAULT_SCAN_INTERVAL = timedelta(seconds=15)
+
+MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=3)
+
+MIN_I2C_ADDRESS = 0x76
+MAX_I2C_ADDRESS = 0x77
+
+CONF_I2C_ADDRESS = "i2c_address"
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
+    {
+        vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+        vol.Required(CONF_I2C_ADDRESS): vol.All(
+            vol.Coerce(int), vol.Range(min=MIN_I2C_ADDRESS, max=MAX_I2C_ADDRESS)
+        ),
+    }
+)
+
+
+def setup_platform(hass, config, add_entities, discovery_info=None):
+    """Set up the sensor platform."""
+    try:
+        # initializing I2C bus using the auto-detected pins
+        i2c = I2C(board.SCL, board.SDA)
+        # initializing the sensor
+        bmp280 = Adafruit_BMP280_I2C(i2c, address=config[CONF_I2C_ADDRESS])
+    except ValueError as error:
+        # this usually happens when the board is I2C capable, but the device can't be found at the configured address
+        if str(error.args[0]).startswith("No I2C device at address"):
+            _LOGGER.error(
+                "%s. Hint: Check wiring and make sure that the SDO pin is tied to either ground (0x76) or VCC (0x77)!",
+                error.args[0],
+            )
+            raise PlatformNotReady()
+        raise error
+    # use custom name if there's any
+    name = config.get(CONF_NAME)
+    # BMP280 has both temperature and pressure sensing capability
+    add_entities(
+        [Bmp280TemperatureSensor(bmp280, name), Bmp280PressureSensor(bmp280, name)]
+    )
+
+
+class Bmp280Sensor(Entity):
+    """Base class for BMP280 entities."""
+
+    def __init__(
+        self,
+        bmp280: Adafruit_BMP280_I2C,
+        name: str,
+        unit_of_measurement: str,
+        device_class: str,
+    ):
+        """Initialize the sensor."""
+        self._bmp280 = bmp280
+        self._name = name
+        self._unit_of_measurement = unit_of_measurement
+        self._device_class = device_class
+        self._state = None
+        self._errored = False
+
+    @property
+    def name(self):
+        """Return the name of the sensor."""
+        return self._name
+
+    @property
+    def state(self):
+        """Return the state of the sensor."""
+        return self._state
+
+    @property
+    def unit_of_measurement(self):
+        """Return the unit of measurement."""
+        return self._unit_of_measurement
+
+    @property
+    def device_class(self):
+        """Return the device class."""
+        return self._device_class
+
+    @property
+    def available(self) -> bool:
+        """Return if the device is currently available."""
+        return not self._errored
+
+
+class Bmp280TemperatureSensor(Bmp280Sensor):
+    """Representation of a Bosch BMP280 Temperature Sensor."""
+
+    def __init__(self, bmp280: Adafruit_BMP280_I2C, name: str):
+        """Initialize the entity."""
+        super().__init__(
+            bmp280, f"{name} Temperature", TEMP_CELSIUS, DEVICE_CLASS_TEMPERATURE
+        )
+
+    @Throttle(MIN_TIME_BETWEEN_UPDATES)
+    def update(self):
+        """Fetch new state data for the sensor."""
+        try:
+            self._state = round(self._bmp280.temperature, 1)
+            if self._errored:
+                _LOGGER.warning("Communication restored with temperature sensor")
+                self._errored = False
+        except OSError:
+            # this is thrown when a working sensor is unplugged between two updates
+            _LOGGER.warning(
+                "Unable to read temperature data due to a communication problem"
+            )
+            self._errored = True
+
+
+class Bmp280PressureSensor(Bmp280Sensor):
+    """Representation of a Bosch BMP280 Barometric Pressure Sensor."""
+
+    def __init__(self, bmp280: Adafruit_BMP280_I2C, name: str):
+        """Initialize the entity."""
+        super().__init__(
+            bmp280, f"{name} Pressure", PRESSURE_HPA, DEVICE_CLASS_PRESSURE
+        )
+
+    @Throttle(MIN_TIME_BETWEEN_UPDATES)
+    def update(self):
+        """Fetch new state data for the sensor."""
+        try:
+            self._state = round(self._bmp280.pressure)
+            if self._errored:
+                _LOGGER.warning("Communication restored with pressure sensor")
+                self._errored = False
+        except OSError:
+            # this is thrown when a working sensor is unplugged between two updates
+            _LOGGER.warning(
+                "Unable to read pressure data due to a communication problem"
+            )
+            self._errored = True

requirements_all.txt

@@ -83,6 +83,7 @@ PyViCare==0.1.7
 # homeassistant.components.xiaomi_aqara
 PyXiaomiGateway==0.12.4
 
+# homeassistant.components.bmp280
 # homeassistant.components.mcp23017
 # homeassistant.components.rpi_gpio
 # RPi.GPIO==0.7.0
@@ -111,6 +112,9 @@ abodepy==0.18.1
 # homeassistant.components.mcp23017
 adafruit-blinka==3.9.0
 
+# homeassistant.components.bmp280
+adafruit-circuitpython-bmp280==3.1.1
+
 # homeassistant.components.mcp23017
 adafruit-circuitpython-mcp230xx==2.2.2