New venstar climate component

.coveragerc

@@ -318,6 +318,7 @@ omit =
     homeassistant/components/climate/radiotherm.py
     homeassistant/components/climate/sensibo.py
     homeassistant/components/climate/touchline.py
+    homeassistant/components/climate/venstar.py
     homeassistant/components/cover/garadget.py
     homeassistant/components/cover/homematic.py
     homeassistant/components/cover/knx.py

homeassistant/components/climate/venstar.py

@@ -0,0 +1,278 @@
+"""
+Support for Venstar WiFi Thermostats.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/climate.venstar/
+"""
+import logging
+import voluptuous as vol
+
+from homeassistant.components.climate import (
+    STATE_COOL, STATE_HEAT, STATE_AUTO,
+    ClimateDevice, PLATFORM_SCHEMA,
+    SUPPORT_TARGET_TEMPERATURE, SUPPORT_TARGET_HUMIDITY,
+    SUPPORT_FAN_MODE, SUPPORT_OPERATION_MODE,
+    SUPPORT_TARGET_TEMPERATURE_HIGH,
+    SUPPORT_TARGET_TEMPERATURE_LOW,
+    ATTR_OPERATION_MODE,
+    ATTR_TARGET_TEMP_HIGH, ATTR_TARGET_TEMP_LOW)
+
+from homeassistant.const import (
+    CONF_HOST, CONF_PASSWORD, CONF_SSL, CONF_USERNAME, CONF_TIMEOUT,
+    TEMP_FAHRENHEIT, ATTR_TEMPERATURE, TEMP_CELSIUS,
+    PRECISION_WHOLE, STATE_ON, STATE_OFF)
+
+import homeassistant.helpers.config_validation as cv
+
+REQUIREMENTS = ['venstarcolortouch==0.5']
+
+_LOGGER = logging.getLogger(__name__)
+
+DEFAULT_SSL = False
+ATTR_FAN_STATE = 'fan_state'
+ATTR_HVAC_STATE = 'hvac_state'
+VALID_FAN_STATES = [STATE_ON, STATE_AUTO]
+VALID_THERMOSTAT_MODES = [STATE_HEAT, STATE_COOL, STATE_OFF, STATE_AUTO]
+
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_HOST): cv.string,
+    vol.Optional(CONF_USERNAME): cv.string,
+    vol.Optional(CONF_PASSWORD): cv.string,
+    vol.Optional(CONF_SSL, default=DEFAULT_SSL): cv.boolean,
+    vol.Optional(CONF_TIMEOUT, default=5):
+        vol.All(vol.Coerce(int), vol.Range(min=1))
+})
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Set up the Venstar thermostat."""
+    username = config.get(CONF_USERNAME)
+    password = config.get(CONF_PASSWORD)
+    host = config.get(CONF_HOST)
+    if config.get(CONF_SSL):
+        proto = 'https'
+    else:
+        proto = 'http'
+    timeout = config.get(CONF_TIMEOUT)
+
+    import venstarcolortouch
+    client = venstarcolortouch.VenstarColorTouch(addr=host,
+                                                 timeout=timeout,
+                                                 user=username,
+                                                 password=password,
+                                                 proto=proto)
+
+    add_devices([VenstarThermostat(client)], True)
+
+
+class VenstarThermostat(ClimateDevice):
+    """Representation of a Venstar thermostat."""
+
+    def __init__(self, client):
+        """Initialize the thermostat."""
+        self._client = client
+
+    def update(self):
+        """Update the data from the thermostat."""
+        info_success = self._client.update_info()
+        sensor_success = self._client.update_sensors()
+        if not info_success or not sensor_success:
+            _LOGGER.error("Failed to update data from your Thermostat.")
+
+# Thermostat config
+    @property
+    def supported_features(self):
+        """Return the list of supported features."""
+        features = (SUPPORT_TARGET_TEMPERATURE |
+                    SUPPORT_FAN_MODE |
+                    SUPPORT_OPERATION_MODE)
+
+        if self._client.mode == self._client.MODE_AUTO:
+            features |= (SUPPORT_TARGET_TEMPERATURE_HIGH |
+                         SUPPORT_TARGET_TEMPERATURE_LOW)
+
+        if self._client.hum_active == 1:
+            features |= SUPPORT_TARGET_HUMIDITY
+
+        return features
+
+    @property
+    def name(self):
+        """Return the name of the thermostat."""
+        return self._client.name
+
+    @property
+    def precision(self):
+        """Return the precision of the system.
+
+        Venstar temperature values are passed back and forth in the
+        API as whole degrees C or F.
+        """
+        return PRECISION_WHOLE
+
+    @property
+    def temperature_unit(self):
+        """Return the unit of measurement, as defined by the API."""
+        if self._client.tempunits == self._client.TEMPUNITS_F:
+            return TEMP_FAHRENHEIT
+        else:
+            return TEMP_CELSIUS
+
+    @property
+    def fan_list(self):
+        """Return the list of available fan modes."""
+        return VALID_FAN_STATES
+
+    @property
+    def operation_list(self):
+        """Return the list of available operation modes."""
+        return VALID_THERMOSTAT_MODES
+
+# Current Values
+    @property
+    def current_temperature(self):
+        """Return the current temperature."""
+        return self._client.get_indoor_temp()
+
+    @property
+    def current_humidity(self):
+        """Return the current humidity."""
+        return self._client.get_indoor_humidity()
+
+    @property
+    def current_operation(self):
+        """Return current operation ie. heat, cool, idle."""
+        if self._client.mode == self._client.MODE_HEAT:
+            return STATE_HEAT
+        elif self._client.mode == self._client.MODE_COOL:
+            return STATE_COOL
+        elif self._client.mode == self._client.MODE_AUTO:
+            return STATE_AUTO
+        else:
+            return STATE_OFF
+
+    @property
+    def current_fan_mode(self):
+        """Return the fan setting."""
+        if self._client.fan == self._client.FAN_AUTO:
+            return STATE_AUTO
+        else:
+            return STATE_ON
+
+    @property
+    def device_state_attributes(self):
+        """Return the optional state attributes."""
+        return {
+            ATTR_FAN_STATE: self._client.fanstate,
+            ATTR_HVAC_STATE: self._client.state
+        }
+
+# Target Values
+    @property
+    def target_temperature(self):
+        """Return the target temperature we try to reach."""
+        if self._client.mode == self._client.MODE_HEAT:
+            return self._client.heattemp
+        elif self._client.mode == self._client.MODE_COOL:
+            return self._client.cooltemp
+        else:
+            return None
+
+    @property
+    def target_temperature_low(self):
+        """Return the lower bound temp if auto mode is on."""
+        if self._client.mode == self._client.MODE_AUTO:
+            return self._client.heattemp
+        else:
+            return None
+
+    @property
+    def target_temperature_high(self):
+        """Return the upper bound temp if auto mode is on."""
+        if self._client.mode == self._client.MODE_AUTO:
+            return self._client.cooltemp
+        else:
+            return None
+
+    @property
+    def target_humidity(self):
+        """Return the humidity we try to reach."""
+        return self._client.hum_setpoint
+
+    @property
+    def min_humidity(self):
+        """Return the minimum humidity. Hardcoded to 0 in API."""
+        return 0
+
+    @property
+    def max_humidity(self):
+        """Return the maximum humidity. Hardcoded to 60 in API."""
+        return 60
+
+# Commands
+    def _set_operation_mode(self, operation_mode):
+        """Change the operation mode (internal)."""
+        if operation_mode == STATE_HEAT:
+            success = self._client.set_mode(self._client.MODE_HEAT)
+        elif operation_mode == STATE_COOL:
+            success = self._client.set_mode(self._client.MODE_COOL)
+        elif operation_mode == STATE_AUTO:
+            success = self._client.set_mode(self._client.MODE_AUTO)
+        else:
+            success = self._client.set_mode(self._client.MODE_OFF)
+
+        if not success:
+            _LOGGER.error("Failed to change the "
+                          "operation mode of your thermostat.")
+        return success
+
+    def set_temperature(self, **kwargs):
+        """Set a new target temperature."""
+        set_temp = True
+        operation_mode = kwargs.get(ATTR_OPERATION_MODE, self._client.mode)
+        temp_low = kwargs.get(ATTR_TARGET_TEMP_LOW)
+        temp_high = kwargs.get(ATTR_TARGET_TEMP_HIGH)
+        temperature = kwargs.get(ATTR_TEMPERATURE)
+
+        if operation_mode != self._client.mode:
+            set_temp = self._set_operation_mode(operation_mode)
+
+        if set_temp:
+            if operation_mode == self._client.MODE_HEAT:
+                success = self._client.set_setpoints(temperature,
+                                                     self._client.cooltemp)
+            elif operation_mode == self._client.MODE_COOL:
+                success = self._client.set_setpoints(self._client.heattemp,
+                                                     temperature)
+            elif operation_mode == self._client.MODE_AUTO:
+                success = self._client.set_setpoints(temp_low, temp_high)
+            else:
+                _LOGGER.error("The thermostat is currently not "
+                              "in a mode that supports target temperature.")
+
+            if not success:
+                _LOGGER.error("Failed to change the "
+                              "temperature of your thermostat.")
+
+    def set_fan_mode(self, fan):
+        """Set new target fan mode."""
+        if fan == STATE_ON:
+            success = self._client.set_fan(self._client.FAN_ON)
+        else:
+            success = self._client.set_fan(self._client.FAN_AUTO)
+
+        if not success:
+            _LOGGER.error("Failed to change the fan mode of your thermostat.")
+
+    def set_operation_mode(self, operation_mode):
+        """Set new target operation mode."""
+        self._set_operation_mode(operation_mode)
+
+    def set_humidity(self, humidity):
+        """Set new target humidity."""
+        success = self._client.set_hum_setpoint(humidity)
+
+        if not success:
+            _LOGGER.error("Failed to change the target "
+                          "humidity level of your thermostat.")

requirements_all.txt

@@ -1164,6 +1164,9 @@ user-agents==1.1.0
 # homeassistant.components.camera.uvc
 uvcclient==0.10.1
 
+# homeassistant.components.climate.venstar
+venstarcolortouch==0.5
+
 # homeassistant.components.volvooncall
 volvooncall==0.4.0