Update README.md

README.md

@@ -2,3 +2,20 @@
 
 This is a set of Matlab scripts and functions to transform near-field 
 antenna meusurements into far-field.
+
+## Transformation Scripts
+For each scanning setup (planar,cylindrical,spherical) there is a main script that handles the transformation of the near-field measurements.
+To run one of them, adjust the path to the measurement data files inside the first section of the script.
+Then select whether you want to use the FFT implementation or the so-called matrix method (by-hand-calculation). 
+The former being the faster of course.
+Afterwards, several different plots can be created. 
+Either pattern cuts at different angles, the accumulated pattern error, the error in the half-power beamwidth or the error in the first side-lobe level.
+In case of the script for the [probe position noise analysis](nf2ff_planar_noisy.m) the above mentioned errors are plotted over the standard devitiation of the positioning noise.
+
+
+## Additional Functions
+For visiualization several additional functions have been implemented.
+Using [plotPlanarNFData](plotPlanarNFData.m) and [plotCylindricalNFData](plotCylindricalNFData.m) the data that is read from the measurement files can be plotted.
+
+Using the [TransformationResults](TransformationResults.m) function, the results of a specific scan can be visualized in 3D either in cartesian or spherical coordinates. 
+Additionally the difference between the two pattern is plotted.