The swiss army knife for dynamixel servo motors.
This software's purpose is to have a command line tool to configure dynamixel motors. Dynamixel motors are being used in many robotic projects but it seems like some tooling around the motors is missing. There exists the robotis tool RoboManager which only runs under Windows. There are also other projects like Mixcell which bring some of the functionality to Linux. One big issue with these tools is that they have a GUI which makes it hard to use them over ssh on remote computers. Also it is not possible to use them inside of scripts. Inspexel is a command-line only utility to fill this gap. It also enables the generation of scripted (via bash) motions.
- Automatic motor discovery
- All baudrates (even nonstandard baudrates)
- Dynamixel Protocol V1 and V2
- Support for all currently produced dynamixel motors
- Reading registers with additional information and pretty output
- Reading/Writing individual registers or register groups
- Represent motors and their registers as a fuse mounted filesystem for easy scriptability
- Reboot motors
Family | Subtypes |
---|---|
MX28 | MX-28T, MX-28R, MX-28AT, MX-28AR |
MX64 | MX-64T, MX-64R, MX-64AT, MX-64AR |
MX106 | MX-106T, MX-106R |
MX12 | MX-12W |
MX28-V2 | MX-28T-V2, MX-28R-V2, MX-28AT-V2, MX-28AR-V2 |
MX64-V2 | MX-64T-V2, MX-64R-V2, MX-64AT-V2, MX-64AR-V2 |
MX106-V2 | MX-106T-V2, MX-106R-V2 |
XH430-W350 | XH430-W350-T, XH430-W350-R |
XH430-W210 | XH430-W210-T, XH430-W210-R |
XM430-W350 | XM430-W350-T, XM430-W350-R |
XM430-W210 | XM430-W210-T, XM430-W210-R |
XH430-V350 | XH430-V350 |
XH430-V210 | XH430-V210 |
XL430-W250 | XL430-W250 |
XM540-W150 | XM540-W150-T, XM540-W150-R |
XM540-W270 | XM540-W270-T, XM540-W270-R |
M42-10-S260-R | M42-10-S260-R |
M54-40-S250-R | M54-40-S250-R |
M54-60-S250-R | M54-60-S250-R |
H42-20-S300-R | H42-20-S300-R |
H54-100-S500-R | H54-100-S500-R |
H54-200-S500-R | H54-200-S500-R |
XL-320 | XL-320 |
AX-12A | AX-12A |
AX-18A | AX-18A |
AX-12W | AX-12W |
Inspexel comes with several subcommands. Each subommand represents a different aspect or way to configure a dynamixel motor or inquire its configuration. All commands accept the arguments
--device [path-to-serial-device]
select the serial device--baudrate [baudrate-in-baud]
select the baudrate to communicate to the motors (some commands also support multiple baudrates)--protocol_verion [1/2]
use either protocol version 1 or 2
$ inspexel
or:
$ inspexel detect
Add the flag --read_all
flag to get the content of all registers nicely printed.
$ inspexel detect --read_all
Reboots motor with id 3
$ inspexel reboot --id 3
Set register 0x44 (68) of motor 3 to value 1
$ inspexel set_register --register 0x44 --values 1 --id 0x03
Inspexel can expose all registers of all connected as a fuse filesystem.
$ inspexel fuse
Inspexel will create a directory dynamixelFS
.
Then a detect cycle is run automatically and every detected motor will be represented in a subdirectory of dynamixelFS
(e.g., dynamixelFS/11/
for motor with id 11).
Within that directory are two subdirectories containing files representing the registers either by name dynamixelFS/11/by-register-name
or by address dynamixelFS/11/by-register-id
.
A read on any of the containing files will make inspexel perform a read of the corresponding register and return the content as string.
You can use that to live monitor the value of a register:
$ inspexel fuse & && watch cat "dynamixelFS/11/by-register-name/Present\ Position"
Likewise you can set register values as if they were files:
$ inspexel fuse & && echo 1 > dynamixelFS/11/by-register-name/LED
Further you can manually trigger detection of a motor by writing the motorID to look for to dynamixelFS/detect_motor
:
$ echo 11 > dynamixelFS/detect_motor
$ inspexel --help
$ man inspexel
# install Fuse deps
$ sudo apt-get install libfuse-dev
# build inspexel
$ git clone https://github.com/gottliebtfreitag/inspexel.git
$ cd inspexel
$ make && sudo make install
# build inspexel
$ git clone https://github.com/gottliebtfreitag/inspexel.git
$ cd inspexel
$ make && sudo make install