rustlink is a set of tools to program STM32 devices:
rst-info: device information toolrst-flash: programmer and flash manipulation tool
The motivation behind these tools is that probe-rs-cli can not handle multiple connected probes (devices):
$ probe-rs-cli info
Error: 2 probes were found.
With rst-flash you can choose by serial number which device to use:
$ rst-info list
[0]: STLink V2 - serial: AAAAAAAAAAAAAAAAAAAAAAAAAAAA
[1]: STLink V2 - serial: BBBBBBBBBBBBBBBBBBBBBBBBBBBB
$ rst-flash download -s AAAAAAAAAAAAAAAAAAAAAAAAAAAA -t STM32F103C8 -f app.elf
Finished in 0.179s
$ rst-flash reset -s AAAAAAAAAAAAAAAAAAAAAAAAAAAA -t STM32F103C8
The following tools are necessary for building:
cargo(>=1.68.2)rustc(>=1.68.2)
Both can be installed from the official Rust site.
Invoke the following commands:
$ cargo build --release
$ cargo install --path .which will build rst-info and rst-flash executables and install them in <your-home>/.cargo/bin/.
$ rst-info list
[0]: STLink V2 - serial: AAAAAAAAAAAAAAAAAAAAAAAAAAAA
[1]: STLink V2 - serial: BBBBBBBBBBBBBBBBBBBBBBBBBBBB
$ rst-flash download -s AAAAAAAAAAAAAAAAAAAAAAAAAAAA -t STM32F103C8 -f app.elf
Finished in 0.179s
$ rst-flash reset -s AAAAAAAAAAAAAAAAAAAAAAAAAAAA -t STM32F103C8
$ rst-flash download -s AAAAAAAAAAAAAAAAAAAAAAAAAAAA -t STM32F103C8 -f app.elf
Finished in 0.191s
$ rst-flash dump -s AAAAAAAAAAAAAAAAAAAAAAAAAAAA -t STM32F103C8 0x0800_0000 1
Addr 0x08000000: 0x20005000
Read 1 words in 498.057µs
$ rst-flash erase -s AAAAAAAAAAAAAAAAAAAAAAAAAAAA -t STM32F103C8
$ rst-flash dump -s AAAAAAAAAAAAAAAAAAAAAAAAAAAA -t STM32F103C8 0x0800_0000 1
Addr 0x08000000: 0xffffffff
Read 1 words in 473.943µs
$ probe-rs-cli chip info STM32F103C8
STM32F103C8
Cores (1):
- main (Armv7m)
RAM: 0x20000000..0x20005000 (20.00 KiB)
NVM: 0x08000000..0x08010000 (64.00 KiB)