Releases: foldynl/QLog
v0.40.1
- Fixed Bands - Added missing 8m band (issue #515)
- Fixed CW Console - EXCSTR does not work properly (issue #517)
- Fixed Activity Manager - Missing Propagation Mode None (issue #519)
- Fixed QSO Filter - filter fields with random order (PR #525 @aa5sh)
- Fixed TCI error when you change Rig (issue #526)
- Fixed NewContact - satellite mode too wide (issue #527)
Full Changelog: v0.40.0...v0.40.1
WINDOWS USER ONLY
If you have installed versions 0.35.2 or older, perform a manual uninstall and then install the new version of QLog. There is no need to worry about your QSOs during the uninstall, as the uninstall procedure does not delete the internal data of QLog. Of course, a backup is always recommended.
If you have installed versions 0.36 or newer, then it is not necessary to perform an uninstall.
Windows Libraries:
Qt 6.6.3
openssl 3.3.1
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2024b (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below
Fedora 39: below
Fedora 40: below
Fedora 41: below
Ubuntu 20.04, 22.04, 24.04: via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
MacOS DMG: https://github.com/aa5sh/QLog/releases (available later)
Contributors
Assets 10
v0.40.0
The biggest change in this release is the new Activity Manager, which replaced the Layout Manager. The Activity Manager is now in the bottom-left corner.
Basic contest support has also been added. Please read more about contest support on the wiki.
- [NEW] - Activity Manager - merged Layout Manager and profiles (issue #408)
- [NEW] - Activity Manager - Added new dynamic fields - Contest fields, RX/TX Power
- [NEW] - Added light support for contests (issue #345)
- [NEW] - Added CW macros EXCHSTR, EXCHNR, EXCHNRN
- [NEW] - Export Filter - Added user filter combo (original idea PR #476 @aa5sh)
- [NEW] - New Contact - Added expand/collapse button to QSO field tab widget (PR #495 @kyleboyle)
- [NEW] - Alert - Added CQZ and ITUZ filters
- [NEW] - KSTChat - Added a new 40MHz room (PR #496 @kyleboyle)
- [NEW] - Station Profile contains Operator Callsign (issue #441 @kyleboyle)
- [NEW] - Station Profile contains County (issue #493 @kyleboyle)
- [NEW] - Statistics - Adds time of day and better qso mapping (PR #501 @kyleboyle)
- [NEW] - Bandmap - Tooltip shows a spotter callsign (PR #507 @Skittlebrau)
- [CHANGED] - New Contact - Renamed DXCC Tab to DX Stats contains DXCC and Station Statistics (issue #477)
- [CHANGED] - QSL Import dialog - Detail text is selectable by mouse and keyboard
- [CHANGED] - Removed Main Menu Layout; Activity Manager is in the bottom-left corner
- [CHANGED] - Removed Keep Options from the Equipment Menu - use Activity Manager for it
- Fixed issue when CW is always selected after Settings exiting or connecting the Rig
- Updated Timezone definition file - version 2024b
Full Changelog: v0.39.0...v0.40.0
Wiki Changelog: https://github.com/foldynl/QLog/wiki#changelog
WINDOWS USER ONLY
If you have installed versions 0.35.2 or older, perform a manual uninstall and then install the new version of QLog. There is no need to worry about your QSOs during the uninstall, as the uninstall procedure does not delete the internal data of QLog. Of course, a backup is always recommended.
If you have installed versions 0.36 or newer, then it is not necessary to perform an uninstall.
Windows Libraries:
Qt 6.6.3
openssl 3.3.1
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2024b (Updated) (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below
Fedora 39: below (last)
Fedora 40: below
Fedora 41: below (new)
Ubuntu 20.04, 22.04, 24.04: via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
MacOS DMG: https://github.com/aa5sh/QLog/releases (available later)
Contributors
Assets 2
v0.39.0
- [NEW] - DXC - Added Full-text search
- [NEW] - Select S in RST Edit when focused (issue #454)
- [NEW] - Alerts - Added Member Column
- [CHANGED] - HamlibDrv Rig/Rot- Added multiplatform reliable sleep
- [CHANGED] - Changed Backup policy
- [CHANGED] - Logbook page size - improved performance
- [CHANGED] - Logbook - CTRL-A (Select All) is disabled
- [CHANGED] - Awards - Bands are displayed based on the Settings (issue #452)
- [CHANGED] - WSJTX - More reliable detection of CQ stations (PR #471 @aa5sh)
- [CHANGED] - WSJTX - SOTA/POTA/WWFF/SIG are being added to the logged QSO (PR #463 @aa5sh)
- [CHANGED] - Stats - Add a confirmation dialog for displaying over 50k QSOs on the map
- [CHANGED] - New Contact - Starting QSO Timer when Rig online and WSJTX Update Callsign Status is received
- [CHANGED] - Added a postponed handling for Rig soft errors (issue #472)
- Fixed WSJT-X does not emit band change if rig is disconnected (issue #447)
- Fixed Wrong import of ADIF file of another log program (issue #455)
- Fixed WSJTX log record is stored incorrectly if it contains non-ASCII chars(issue #458)
- Fixed ADIF import does not import records with old DXCC Entities (issue #459)
- Fixed ADIF import incorrectly uses Station Profile parameters (issue #461)
- Fixed Logbook - QSO Table Column Width Does Not Stick (issue #464)
- Fixed Alerts Window displays OOB Spots (issue #469)
- Fixed Field values from past QSOs are used incorrectly in case of WSJTX QSOs (#issue 470)
Full Changelog: v0.38.0...v0.39.0
Wiki Changelog: https://github.com/foldynl/QLog/wiki#changelog
Thank you for your patience in finding bugs.
WINDOWS USER ONLY
If you have installed versions 0.35.2 or older, perform a manual uninstall and then install the new version of QLog. There is no need to worry about your QSOs during the uninstall, as the uninstall procedure does not delete the internal data of QLog. Of course, a backup is always recommended.
If you have installed versions 0.36 or newer, then it is not necessary to perform an uninstall.
Windows Libraries:
Qt 6.6.3
openssl 3.3.1
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2024a (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below
Fedora 39: below
Fedora 40: below
Ubuntu 20.04, 22.04, 24.04: via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
MacOS DMG: https://github.com/aa5sh/QLog/releases
Contributors
Assets 8
v0.38.0
- [NEW] - Logbook - Added Send DX Spot to the QSO Context Menu
- [NEW] - DX Filter - Added Dedup Time/Freq difference setting (@aa5sh)
- [NEW] - Rig Setting - Added RTS/DTR PTT Type support (issue #353)
- [NEW] - Bandmap - Scrollbar position is saved per band (issue #415)
- [NEW] - New Contact - Added a dynamic value completer for SIG field (issue #425)
- [NEW] - Awards - Added SOTA/POTA/WWFF (@aa5sh issue #311)
- [NEW] - Awards - Added Not-Worked Filter
- [NEW] - New Contact - Added Long Path Azimuth info
- [NEW] - POTA Fields allow a comma-delimited list of one or more POTA Refs
- [NEW] - WSJTX tunes freq/mode like Rig if rig is disconnected
- [CHANGED] - Alert Widget is a Dock Widget (issue #399)
- [CHANGED] - QLog adds more information from callbook for WSJTX QSOs (issues #403 #405 #420)
- [CHANGED] - File Open dialogs are not a native dialog under Linux (issue #427)
- [CHANGED] - Profiles transferred to DB
- [CHANGED] - LOV last_dates transferred to DB
- [CHANGED] - DX Cluster - Login Callsign is always the base Callsign
- [REMOVED] - Setting DXCC Date
- Fix for MacOS Layout Geometry Restore (@aa5sh)
- Fixed TQSL does not block GUI thread
- Fixed MacOS build process (@aa5sh)
Full Changelog: v0.37.2...v0.38.0
WINDOWS USER ONLY
If you have installed versions 0.35.2 or older, perform a manual uninstall and then install the new version of QLog. There is no need to worry about your QSOs during the uninstall, as the uninstall procedure does not delete the internal data of QLog. Of course, a backup is always recommended.
If you have installed versions 0.36 or newer, then it is not necessary to perform an uninstall.
Windows Libraries:
Qt 6.6.3
openssl 3.3.1
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2024a (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below
Fedora 39: below
Fedora 40: below
Ubuntu 20.04, 22.04, 24.04: via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
MacOS DMG: https://github.com/aa5sh/QLog/releases
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
Contributors
Assets 8
v0.37.2
- Fixed Field QSL Send Via should be retained (issue #413)
- Fixed Set rotator position fails if azimuth > 180 (issue #417)
- Fixed Windows State/Size does not save in case of fullscreen (issue #418)
- Fixed Significant rounding during azimuth calculation (issue #422)
- Updated Simplified Chinese translation
- Updated Spanish translation
- Added Italian translation (thx IK1VQY)
Full Changelog: v0.37.1...v0.37.2
WINDOWS USER ONLY
If you have installed versions 0.35.2 or older, perform a manual uninstall and then install the new version of QLog. There is no need to worry about your QSOs during the uninstall, as the uninstall procedure does not delete the internal data of QLog. Of course, a backup is always recommended.
If you have installed versions 0.36 or newer, then it is not necessary to perform an uninstall.
Windows Libraries:
Qt 6.6.3
openssl 3.3.1 (Updated)
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2024a (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below
Fedora 39: below
Fedora 40: below
Ubuntu 20.04, 22.04, 24.04: via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
v0.37.1
- Fixed QSO Table Callsign filter is not filled properly (issue #401)
- Fixed DXC zero frequency for last QSO in case of FT8 QSOs (issue #404)
- Fixed Callsign Context Menu does not work (issue #409)
- Fixed QSO Detail Save and Edit buttons are not translated (issue #410)
Full Changelog: v0.37.0...v0.37.1
WINDOWS USER ONLY
If you have installed versions 0.35.2 or older, perform a manual uninstall and then install the new version of QLog. There is no need to worry about your QSOs during the uninstall, as the uninstall procedure does not delete the internal data of QLog. Of course, a backup is always recommended.
If you have installed versions 0.36 or newer, then it is not necessary to perform an uninstall.
Windows Libraries:
Qt 6.6.3
openssl 3.3.1
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2024a (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below
Fedora 39: below
Fedora 40: below
Ubuntu 20.04, 22.04, 24.04: via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
v0.37.0
- [NEW] - Added Shortcuts Editor (issue #293)
- [NEW] - Added QO100 Bandplan to correctly categorize the DX Spots
- [NEW] - Improved detection of SH/DX SHF Spots
- [NEW] - Online Map - Added WSJTX CQ Spots
- [NEW] - WSJTX - Sortable View
- [NEW] - Alerts - Sortable View
- [NEW] - Added Spanish translation (thx LU1IDC)
- [NEW[ - Added Search Callsign Clear Button (issue #396)
- [CHANGED] - QRZ auth should be over POST with form data (issue #389)
- [CHANGED] - Big CTY file is used
- [CHANGED] - Callbook Country DXCC ID is used in case of difference from Big CTY
- [CHANGED] - Removed ALT+W and CTRL+DEL shortcuts
- [CHANGED] - Removed New Contact and Save Contact from Logbook Main Menu
- Fixed Guantanamo KG4 Issue (issue #372)
- Fixed QRZ Lookup Not Including Full Name - History (issue #388)
- Fixed Spot Last QSO contains TX freq, should contain RX freq (issue #390)
- Fixed Spot Last QSO must contain Freq in kHz (issue #391)
- Fixed Bandmap select previous selected callsign issue (issue #394)
- Fixed Malfunctioning tuning of WSJTX Alert spot
- Fixed DXCC Status for FT4 Spots incorrectly identified in WSJTX
WINDOWS USER ONLY
If you have installed versions 0.35.2 or older, perform a manual uninstall and then install the new version of QLog. There is no need to worry about your QSOs during the uninstall, as the uninstall procedure does not delete the internal data of QLog. Of course, a backup is always recommended.
If you have installed versions 0.36 or newer, then it is not necessary to perform an uninstall.
Windows Libraries:
Qt 6.6.3
openssl 3.3.1
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2024a (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below
Fedora 39: below
Fedora 40: below
Ubuntu 20.04, 22.04, 23.10, 24.04: via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
v0.36.0
- [NEW] - WSJTX: Added support to received ADIF QSO Log record
- [NEW] - Sat mode is derived from RX/TX Freq
- [NEW] - Logbook filters change color when enabled
- [NEW] - Frequency input boxes PageUp/Dn switches the band (issue #360)
- [NEW] - CTRL + PgUp/Dn switch band on the connected rig - global shortcut (issue #360)
- [NEW] - Added number of filtered QSOs (issue #374)
- Fixed Callbook query does not work (issue #377)
- Fixed Logbook columns are reordered after Delete (issue #383)
- Fixed Missing Republic of Kosovo flag (issue #384)
WINDOWS USER ONLY
I'm sorry, but due to unexpected changes and an internal error in the Windows QT Installer (issue description), I have to release an updated QLog version for this platform with instructions how to install it. Please follow these steps:
- If you already have older versions (< 0.35.2) installed, perform a manual uninstall of that version.
- Install the new version of QLog from
qlog-installer0.36.0_1.exepackage
Please follow the above instructions even if you already have QLog version 0.36 installed.
There is no need to worry about your QSOs during the uninstall, as the uninstall procedure does not delete the internal data of QLog. Of course, a backup is always recommended.
I hope that future versions will be installed correctly.
Windows Libraries:
Qt 6.6.3 (Updated)
openssl 3.3.1 (Updated)
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2024a (Updated) (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below - reissued
Fedora 39: below
Fedora 40: below (New)
Ubuntu 20.04, 22.04, 23.10, 24.04: via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
Full Changelog: v0.35.2...v0.36.0
v0.35.2
- Improved delete performance; added delete progress bar (issue #351)
- Fixed Password with plus is incorrectly sent to online services (issue #366)
- Fixed Compilation issue under Hamlib v4.6 (issue #368)
- Fixed Network Rig configuration is not saved (issue #370)
Windows Libraries:
Qt 6.6.2
openssl 3.2.1
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2023d (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below
Fedora 38: below (Last)
Fedora 39: below
MacOS 12: below
Ubuntu 20.04, 22.04, 23.10, 24.04 (New): via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
Full Changelog: v0.35.1...v0.35.2
v0.35.1
- Fixed Free QRZ callbook - Name is not populating (issue #363)
- Fixed Incorrect CW segment freqs (issue #365)
Windows Libraries:
Qt 6.6.2
openssl 3.2.1
hamlib 4.5.5
qtkeychain 0.13.2
Timezone DB: 2023d (https://github.com/evansiroky/timezone-boundary-builder/releases)
Binaries:
Windows: below
Fedora 38: below (Last)
Fedora 39: below
MacOS 12: below
Ubuntu 20.04, 22.04, 23.10, 24.04 (New): via PPA (https://launchpad.net/~foldyna/+archive/ubuntu/qlog)
Flatpak package is available via Flathub. The package contains built-in Trusted QSL.
Full Changelog: v0.35.0...v0.35.1