Skip to content

fmassa/optimize-net

Repository files navigation

OptNet - reducing memory usage in torch neural networks

Memory optimizations for torch neural networks.

Heavily inspired from the Optimizer from https://github.com/facebook/fb-caffe-exts

Installing

Simply do

luarocks install optnet

How does it work ?

It goes over the network and verify which buffers can be reused. It supports both inference (evaluation) mode and training mode.

Inference mode

Here is a list of currently tested modules. Numbers are for CPU version, with batch size of 1, for double type, in the format (total memory used, memory used for the outputs, memory used for the internal buffers, memory used for the parameters and grad parameters):

Network before optimization after optimization Relative save
alexnet (973MB, 6MB, 43MB, 924MB) (472MB, 1.5MB, 9MB, 462MB) (51%, 75%, 80%, 50%)
vgg-A (2311MB, 69MB, 215MB, 2027MB) (1106MB, 31MB, 61MB, 1014MB) (52%, 55%, 72%, 50%)
googlenet (505MB, 69MB, 145MB, 292MB) (193MB, 31MB, 16MB, 146MB) (62%, 54%, 89%, 50%)
resnet 110 (cifar) (113MB, 16MB, 71MB, 26MB) (15MB, 0.5MB, 1.3MB, 13MB) (87%, 97%, 98%, 50%)

Note that for most of the models, for a batch size of 1 most of the memory is spent with the weights and gradWeights of the network (and the latter can be safely freed during inference). More interestingly, the the output size is linearly dependent on the batch size, which means that the total savings are much more significant for bigger batch sizes.

In a more realistic setup where we use cudnn and batch size of 128, the gains are way more significant, specially for very deep networks like resnet. The memory usage is shown in the following table (for float type), following (total memory used, memory used for the outputs, memory used for the parameters and grad parameters) as cudnn almost don't use internal buffers:

Network before optimization after optimization Relative save
alexnet (859MB, 397MB, 462MB) (328MB, 97MB, 231MB) (62%, 75%, 50%)
vgg-A (5340MB, 4386MB, 1014MB) (2467MB, 1960MB, 507MB) (54%, 55%, 50%)
googlenet (4536MB, 4390MB, 146MB) (2066MB, 1993MB, 73MB) (54%, 55%, 50%)
resnet 110 (cifar) (1049MB, 1036MB, 13MB) (39MB, 32MB, 7MB) (96%, 97%, 50%)

Training mode

We currently support a basic algorithm for training mode. Using cudnn with batch size of 64, we currently obtain the following savings, in the format (total memory used, memory used for the outputs, memory used for the gradInputs, memory used for the parameters and gradParameters):

Network before optimization after optimization Relative save
alexnet (963MB, 195MB, 303MB, 462MB) (816MB, 195MB, 156MB, 462MB) (15%, 0%, 48%, 0%)
vgg-A (5433MB, 2191MB, 2228MB, 1014MB) (4228MB, 2191MB, 1023MB, 1014MB) (22%, 0%, 54%, 0%)
googlenet (6092MB, 2195MB, 3346MB, 146MB) (4844MB, 2195MB, 2098MB, 146MB) (20%, 0%, 37%, 0%)
resnet 110 (cifar) (664MB, 259MB, 392MB, 13MB) (428MB, 259MB, 156MB, 13MB) (36%, 0%, 60%, 0%)

Note that the relative save of the gradInput stays constant for different batch sizes, meaning that the total relative savings will be more important for bigger batch sizes (as the parameters doesn't depend on the batch size).

We can setup the optimizations for training mode by using mode='training' as follows

models = require 'optnet.models'
modelname = 'googlenet'
net, input = models[modelname]()

opts = {inplace=true, mode='training'}

optnet = require 'optnet'

optnet.optimizeMemory(net, input, opts)

Optional parameters

Here is a list of options that are currently supported, and should be passed in the opts table as a third argument:

  • inplace: uses in place modules when available (boolean)
  • mode: selects between training and inference optimization algorithm (string)
  • reuseBuffers: shares internal buffers between same modules (like unfolded images for convolution) (boolean)
  • removeGradParams: remove gradWeight and gradBias in the networks, saving their sharings so that they can be exactly reconstructed. Only applies for inference mode (boolean)

Visualizing the memory reuse

We can analyse the sharing of the internal buffers by looking at the computation graph of the network before and after the sharing.

For that, we have the graphgen(net, input, opts) function, which creates the graph corresponding to the network net. The generated graph contains the storage id of each output, and same colors means same storage.

Note that net is a nn model, and not a nngraph network. This allows us to use optnet.graphgen to generate graph visualizations of nn networks without having to use nngraph.

Let's have a look:

-- some handy models are defined in optnet.models
-- like alexnet, googlenet, vgg and resnet
models = require 'optnet.models'
modelname = 'googlenet'
net, input = models[modelname]()

generateGraph = require 'optnet.graphgen'

-- visual properties of the generated graph
-- follows graphviz attributes
graphOpts = {
displayProps =  {shape='ellipse',fontsize=14, style='solid'},
nodeData = function(oldData, tensor)
  return oldData .. '\n' .. 'Size: '.. tensor:numel()
end
}

g = generateGraph(net, input, graphOpts)

graph.dot(g,modelname,modelname)

This generates the following graph:

GoogleNet without memory optimization

Now what happens after we optimize the network ? Check the colors and the storage ids.

models = require 'optnet.models'
modelname = 'googlenet'
net, input = models[modelname]()

opts = {inplace=true, reuseBuffers=true}

generateGraph = require 'optnet.graphgen'

optnet = require 'optnet'

optnet.optimizeMemory(net, input, opts)

graphOpts = {
displayProps =  {shape='ellipse',fontsize=14, style='solid'},
nodeData = function(oldData, tensor)
  return oldData .. '\n' .. 'Size: '.. tensor:numel()
end
}

g = generateGraph(net, input, graphOpts)

graph.dot(g,modelname..'_optimized',modelname..'_optimized')

GoogleNet with memory optimization

Counting the amount of saved memory

We can also provide a function to compute the amount of memory used by the network in bytes, which allows us to check the amount of saved memory. It decomposes the total amount of memory in four fields:

  • total memory used by the outputs of each module
  • total memory used by the gradInputs of each module
  • total memory used by the internal buffers of each module
  • total memory used by the weights and gradWeights of each module.

Here is an example

optnet = require 'optnet'

models = require 'optnet.models'
modelname = 'googlenet'
net, input = models[modelname]()

-- countUsedMemory needs the network to
-- be initialized with all its buffers
-- to output correct results
net:forward(input)
mem1 = optnet.countUsedMemory(net)

optnet.optimizeMemory(net, input)

net:forward(input)
mem2 = optnet.countUsedMemory(net)

optnet.removeOptimization(net)

net:forward(input)
mem3 = optnet.countUsedMemory(net)

print('Before optimization        : '.. mem1.total_size/1024/1024 .. ' MBytes')
print('After optimization         : '.. mem2.total_size/1024/1024 .. ' MBytes')
print('After removing optimization: '.. mem3.total_size/1024/1024 .. ' MBytes')

About

OptNet - Reducing memory usage in torch neural nets

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published