Skip to content

Releases: flybywiresim/aircraft

v0.13.0-rc2

05 Apr 02:46
Compare
Choose a tag to compare
v0.13.0-rc2 Pre-release
Pre-release
1. [GENERAL] Fixed issue in C++ WASM Framework that caused performanc…

v0.13.0-rc1

30 Mar 06:47
91b4178
Compare
Choose a tag to compare
v0.13.0-rc1 Pre-release
Pre-release

0.13.0

  1. [GENERAL] Fixed issue in C++ WASM Framework that caused performance degradation in some WASM modules - frankkopp (cdr_maverick)
  2. [A32NX/FCU] Fixed auto-initialisation of baro unit - tracernz (Mike)
  3. [A380X/FCU] Fix baro-preselect not recognising baro unit changes - tracernz (Mike)
  4. [A380X/FCU] QNH and altitude displays now correctly show "8" values during light test - mattgogerly (Matt)
  5. [A380X/FCU] Added metric altitude button - tracernz (Mike)
  6. [A380X/FCU] Baro knob now requires to be pushed to enter STD mode and pulled to enter BARO mode, as per the real thing - danestfanous (Daniel Estfanous)
  7. [A32NX/CAMERA] Improved default camera position for Virtual Reality (VR) - aguther (Andreas Guther)
  8. [A380X/EFB] Fixed doors automatically opening in flight - saschl (saschl)
  9. [A380X/FMS] Fixed layouting issue on FMS/ACTIVE/PERF/T.O page for some users - flogross89 (floridude)
  10. [A380X/TELEX] Added popup for telex consent - saschl (saschl) Maximilian-Reuter (_chaoz)
  11. [ND] Fix memory leak when using TERR ON ND - Nufflee (nufflee)
  12. [A380X/OVHD] Fix RCDR GND CTL button/logic - flogross89 (floridude)
  13. [A380X] Various fixes in FMS and ECL - flogross89 (floridude)
  14. [A380X/EWD] QoL: Add soft keys to EWD checklists, can be enabled via EFB - flogross89 (floridude)
  15. [A380X/LIGHTS] Implemented LOGO LT switch funcionality - ImenesFBW (Imenes)
  16. [A380X/SD] Added correct ECP ALL button SD page cycling to the A380X - frankkopp (cdr_maverick)
  17. [A380X/SURV] Fixed BTV setup from F/O side, and ROW issues at G/A with early THR RED - flogross89 (floridude)
  18. [A380X/MFD] Limit keyboard inputs to keys present in the KCCU and remap comma to decimal dot - beheh (Benedict Etzel)
  19. [GENERAL] Mitigated issue with pop-ups (i.e. pause on TOD notification) being unable to be dismissed while camera is in freelook + ALT-TAB - 2hwk (2cas)
  20. [A380X/AP] Improved support of simulation rate 4x - aguther (Andreas Guther)
  21. [A380X/FLIGHTMODEL] Tweaked jetway connect position - C-Schaffhausen (Cedric)
  22. [A32NX/FANS] Restore Portuguese station codes - tracernz (Mike)
  23. [A380X/MFD] Fixed DIRECT TO selection of active waypoint does nothing - sognodelx (Sven Gross)
  24. [A380X/MODEL] Optimized 4K textures - Repsol
  25. [A380X/EFB] Moved cabin lighting from ambient light knob to EFB Quick Settings - 2hwk (2cas)
  26. [A380X/AFS] Fixed CP V/S knob push levelling off the aircraft when it should have no action - tracernz (Mike)
  27. [A380X/MFD] MFD/SURV: Fixed TCAS not switching status when using DEFAULT SETTINGS button - flogross89 (floridude)
  28. [A380X/FUEL] Recalibrated inital fuel settings - sschiphorst (Yahtzee94)
  29. [A380X/ENG] Another adjustment to taxi thrust - donstim (donbikes)
  30. [A380/ANIM] Animation of flaps now from FPPU position. Interim fix for spoiler low end animation - Crocket63 (crocket)
  31. [A380X/ENG] Improve oil pressure lookup table - tracernz (Mike)
  32. [A380X/FADEC] Add N1 fan protection measures (METOTS, KOZ) - flogross89 (floridude)
  33. [A380/WING_FLEX] Reduced stiffness of wings for more tip up bend - Crocket63 (crocket)
  34. [A380X/WING_FLEX] Reduced stiffness of wings for more tip up bend - Crocket63 (crocket)
  35. [A380X/FWS] Add V1 callout - flogross89 (floridude)
  36. [FMS] Fix existing T-P moving when inserting temporary flight plan - Benjozork (Benjamin Dupont)
  37. [GPU] Improved handling of ground power for more immersive use Maximilian-Reuter (_chaoz_)
  38. [OANS] Display correct flags when IRS position is not available - Nufflee (nufflee)
  39. [FMS] Use station declination for PBX/PBD waypoints - BlueberryKing (BlueberryKing)
  40. [RA] Add direct coupling and interrupted antenna cable failures to RAs - beheh (Benedict Etzel)
  41. [A32NX/TELEX] Keep flight number set even if already taken - BenJuan26 (BenJuan26)
  42. [HYD] Placeholder inhibit logic for electrical backup on ground - Crocket63 (crocket)
  43. [A380X/PRESS] Add pressurization system failures failures ecam messages - mjuhe (Miquel Juhe)
  44. [A380X] Add rudder trim functionality to SECs, add rudder trim indication to PFD, activate indication on SD/FCTL - flogross89 (floridude)
  45. [A380X/MFD] Fix ETA and add TOD prediction in PERF page - BravoMike99 (bruno_pt99)
  46. [A380X/PFD] Add T/D Reached PFD message - BravoMike99 (bruno_pt99)
  47. [A380X/CAMERA] Showcase & pilot view camera fixes LunakisDev (LunakisLeaks)
  48. [A380X/LIGHTS] Added cockpit ambient bounce lights - ImenesFBW (Imenes)
  49. [A380X/FWS] Fix green dot speed for high weights and altitudes, fix FMS speed target for GD > climb speed limit - flogross89 (floridude)
  50. [A380X/PRIM] Fix max. spoiler deflection based on flap conf - flogross89 (floridude)
  51. [A380X/PERF] Changed managed speeds to more realistic numbers - slightlyclueles (abnormaltoast)
  52. [A380X/MFD] Add ATCCOM connect page - heclak (heclak)
  53. [A380X/PFD] Fix CP VV button turning on VV on both PFDs - heclak (Heclak)
  54. [A380X/FMS] Fixed handling of window altitude constraints, deletion of constraints, and formatting - tracernz (Mike)
  55. [A380X/SD] Fix engine fuel flow and fuel used on cruise page still use only ENG 1 + 2 LVars heclak (heclak)
  56. [A380X/ENG] Improved engine fire behaviour - overhead fire pushbuttons silence aural warning and unpowers FADEC - mjuhe (Miquel Juhe)
  57. [A380X/EFB] Fixed being able to click on window open handle through the flyPad screen - 2hwk (2cas)
  58. [A32NX/FMGC] Implemented simulated FMGC computers - lukecologne (luke)
  59. [A32NX/FMGC] Implemented simulated FCU computers - lukecologne (luke)
  60. [A380X/ENGINES] Corrected ENG4 throttle variable typo - rthom91 (Randy Thom)
  61. [ND] Fixed track line not visible in GA TRK, RWY TRK and RWY modes - ta-dzik (ta_dzik)
  62. [A380X/FMS] Added SURV Status & Switching page with TCAS fault indication - Frenkii (Moritz)
  63. [FMS] Fix T/D not showing in selected speed - BlueberryKing (BlueberryKing)
  64. [FMS] Fix Pause at T/D not working in selected speed - BlueberryKing (BlueberryKing)
  65. [A380X/MFD] Various Fuel & Load Fixes - BravoMike99 (bruno_pt99)
  66. [MISC] Replaced brake temperature simulation with physics based model of brakes - Gurgel100 (Pascal)
  67. [A32NX/MCDU] Suppress TMPY FPLN when no modifications made in airways page - robertxing2004 (robeet)
  68. [A380X/FWS] No "auto brake off" callout when double pressing A/THR instinctive disconnect - flogross89 (floridude)
  69. [A380X/FWS] Improve landing capability downgrade triple click logic (#9008) - flogross89 (floridude)
  70. [A32NX/FWS] Add "auto brake off" callout, improve AP/ATHR disconnect aural alert logic - flogross89 (floridude)
  71. [A32NX/FCU] The FCU LCD is now still visible with ambient light when the backlight is off tracernz (Mike)
  72. [A380X/FMC] Fix reset of perf data on done phase or database swap - tracernz (Mike)
  73. [A32NX/ATC] Fixed ATC/TCAS power supply - tracernz (Mike)
  74. [A32NX] Fixed appearance of FCU decals on MSFS2024 - tracernz (Mike)
  75. [FMS] Fixed issue with airport loading timing out on MSFS2024 - tracernz (Mike)
  76. [A32NX] Fixed APU fire detection - tracernz (Mike)
  77. [A380X/COND] Fix wasm crash during rapid decompression - mjuhe (Miquel Juhe)
  78. [A32NX/EWD] Corrected fuel flow step to 20kg/40lbs per hour - BravoMike99 (bruno_pt99)
  79. [A380X] Fix EWD avail. thrust fill area & PFD rudder trim visibility on ground - flogross89 (floridude)
  80. [A380X/OANS] Fix "BTV/FMS RWY DISAGREE" message for single-digit runway identifiers - flogross89 (floridude)
  81. [A380X/FWS] Add automatic normal checklists reset on powerup, go around & shutdown - BravoMike99 (bruno_pt99)
  82. [A32NX/PFD] Synchronize flashing/pulsing components across PFD - lukecologne (luke)
  83. [A380X/LIGHTS] Fix function of FCU brightness knobs - heclak (Heclak)
  84. [A380X/FWS] Fix "NO ZFW OR ZFWCG DATA" ECAM alert after landing - flogross89 (floridude)
  85. [A380X/SD] Add brake temperature color change to amber when brakes are hot - heclak (Heclak)
  86. [A380X/FCU] Fix display of values on FCU during light test - heclak (Heclak)
  87. [A380X/FMS] Fix VLS computation error for CONF 1, might have lead to FMS crashes during climb out - flogross89 (floridude)
  88. [A380X/PFD] Fix PFD DU / ND DU brightness knobs - MichelZ
  89. [A380X/FCU] Add correct QFE label using the baro preselect display - heclak (Heclak)
  90. [FMS] Move the speed limit data to performance data, so that it is flight-plan-specific - BlueberryKing (BlueberryKing)
  91. [A32NX/FWC] Add FCU faults - tracernz (Mike)
  92. [ELEC] Improved elec system startup behaviour - Gurgel100 (Pascal) - saschl
  93. [A380X] Improve pilot and copilot camera positions - heclak (Heclak)
  94. [A380X/EFIS] Illuminate ND range and mode selectors during light test - BravoMike99 (bruno_pt99)
  95. [A380X/FCU] Automatically select LS on LOC mode arming - BravoMike99 (bruno_pt99)
  96. [A380/PFD] Add DISCONNECT AP FOR LDG FMA message - BravoMike99 (bruno_pt99)
  97. [A380X/ENG] Adjust climb thrust to be more accurate - BlueberryKing (BlueberryKing)
  98. [A380X/EWD] Show THR limit in EWD instead of N1 - flogross89 (floridude)
  99. [A380X/FLIGHT MODEL] Fix pitchup and unrecoverable stall - - donstim (donbikes#4084)
  100. [ATC/TCAS] Fixed TCAS failure on baro corrected altitude going invalid - tracernz (Mike)
  101. [ATC/TCAS] Fixed TCAS slant range computation - tracernz (Mike)
  102. [A380X] Add baro unit (hPa/in.Hg) auto selection - tracernz (Mike)
  103. [A380X/PRIM] Adapt protection speeds to new flight model - flogross89 (floridude)
  104. [A380X/EFB] Improved Aircraft Presets configuration for the A380X - frankkopp (cdr_maverick)
  105. [A32NX/AMU] Enable VHF3 audio, and allow switching off VHF1 - tracernz (Mike)
  106. [A380X/PFD] Fix font colours on metric altitude display - MrJigs7 (MrJigs.)
  107. [A380X/MFD] Fixed the altitude prediction not rounding to the nearest 10 on the FPLN page - bulenteroglu (senolitam)
  108. [A380X/MFD] Use slashed zero as default font for FMS pages - bulenteroglu (senolitam)
  109. [A380X/ND] Remove leading zeros from terrain ...
Read more

v0.12.3

09 Nov 16:19
Compare
Choose a tag to compare

A380X & A32NX Stable v0.12.3

We have released a patch update for the Stable version of the A380X.

All of our changes and more information is available on our release notes in our documentation website.

Included is a fix that allows discontinuities to be deleted again. There are no changes for the A32NX in this release.

Release Notes

Please Note: Due to our development and operations workflows, version numbers for the A32NX and A380X are the same. Expect near-simultaneous releases of both aircraft moving forward.

Note: Throttle calibration is now required.
Throttle Calibration Guide


Note: Not Available on MSFS Marketplace.

v0.12.2

09 Nov 01:35
Compare
Choose a tag to compare

A380X & A32NX Stable v0.12.2

We have released a patch update for the Stable version of our A32NX and A380X.

All of our changes and more information is available on our release notes in our documentation website.

Included are a fix for a memory leak when using SimBridge terrain on ND, optimisations to the A380's 4K texture pack and various A380 FMS, ECAM and cockpit improvements.

Release Notes.

Please Note: Due to our development and operations workflows, version numbers for the A32NX and A380X are the same. Expect near-simultaneous releases of both aircraft moving forward.

Note: Throttle calibration is now required.
Throttle Calibration Guide


Note: Not Available on MSFS Marketplace.

v0.12.2-rc2

08 Nov 11:41
Compare
Choose a tag to compare
v0.12.2-rc2 Pre-release
Pre-release
Revert "fix(a380x/flight model): Fix stall and auto rotate issues (#9…

v0.12.2-rc1

08 Nov 00:26
Compare
Choose a tag to compare
v0.12.2-rc1 Pre-release
Pre-release
fix: properly rename artifact if only 1 part

v0.12.1

02 Nov 19:22
2776100
Compare
Choose a tag to compare

A380X & A32NX Stable v0.12.1

We have released a patch update for the Stable version of our A32NX and A380X.

All of our changes and more information is available on our release notes in our documentation website.

Included are some small CPU performance improvements, a fix for doors opening by themselves on the A380, FCU fixes on both aircraft and some avionics+TELEX corrections on the A380.

Release Notes.

Please Note: Due to our development and operations workflows, version numbers for the A32NX and A380X are the same. Expect near-simultaneous releases of both aircraft moving forward.

Note: Throttle calibration is now required.
Throttle Calibration Guide


Note: Not Available on MSFS Marketplace.

v0.12.0

31 Oct 16:10
Compare
Choose a tag to compare

A380X Alpha Release & A32NX Stable v0.12.0

We’re thrilled to finally release the open alpha of the A380X! Start flying the world’s largest passenger airliner in our developer preview. We’ve ensured the aircraft is capable of A to B flights on VATSIM, giving you the ability to explore this majestic aircraft inside and outside the cockpit.

The A380X comes with a 8K and a 4K texture option. See the description in our installer for which version fits you best

The A32NX release is packed with enhancements as well. We've improved the flight deck model with a new glareshield and FCU, as well as an air starter unit for more realistic ground operations.

Notable updates include a new flight planning system support missed approaches, NAV in go-arounds, and alternate route planning. The EFB now has higher simulation rate
capabilities and we have finally introduced our own takeoff performance calculator for your pre-flight planning.

All of our changes and more information is available on our release notes in our documentation website.

Release Notes.

Please Note: Due to our development and operations workflows, version numbers for the A32NX and A380X are the same. Expect near-simultaneous releases of both aircraft moving forward.

Note: Throttle calibration is now required.
Throttle Calibration Guide


Note: Not Available on MSFS Marketplace.

v0.11.1

03 Nov 17:58
Compare
Choose a tag to compare

Stable Version 0.11.1

We published a small update for our A32NX Stable Version. This update primarily addresses some minor issues that were present in our previous stable release. Specifically, we have resolved a problem when a runway is missing from the base sim, but the navdata has been added externally (e.g. Navigraph).

Happy Flying!

Please read before flying + Changelog: https://docs.flybywiresim.com/latest-release/

Note: Throttle calibration is now required.
Guide: https://docs.flybywiresim.com/throttle/


Download using our installer: https://api.flybywiresim.com/installer

Our installation guide: https://docs.flybywiresim.com/installation/
SimBridge Guides: https://docs.flybywiresim.com/simbridge/
Support Guide: https://docs.flybywiresim.com/support/
Known Issues and Workarounds: https://docs.flybywiresim.com/reported-issues/

Note: Not Available on MSFS Marketplace.

v0.11.0

31 Oct 19:49
Compare
Choose a tag to compare

Stable Version 0.11.0

Immerse yourself with advanced navigational capabilities as we introduce vertical navigation to the Stable Version of the A32NX. We have refined various crucial flight instruments, bolstered the FMS with comprehensive updates, and introduced new realistic simulations of systems involving cross bleed engine starts and air conditioning.

We're also excited to introduce updates to the flyPadOS with more reliable weather data from NOAA, new functionality, and cosmetic upgrades.

Please read before flying: https://docs.flybywiresim.com/latest-release/

Note: Throttle calibration is now required.
Guide: https://docs.flybywiresim.com/throttle/


Download using our installer: https://api.flybywiresim.com/installer

Our installation guide: https://docs.flybywiresim.com/installation/

SimBridge Guides: https://docs.flybywiresim.com/simbridge/

Support Guide: https://docs.flybywiresim.com/support/

Known Issues and Workarounds: https://docs.flybywiresim.com/reported-issues/

Note: Not Available on MSFS Marketplace.