A maven extension for incremental building of multi-module projects when using feature branches (Git Flow).
Builds or tests only changed maven modules compared to reference branch in Git (e.g. origin/develop) and all their dependents.
Powered by JGit.
This extension is not limited to Git Flow setups! The extensive configuration options provide support for many other branch setups and/or use cases.
-
- gib.help
- gib.disable
- gib.disableIfBranchMatches
- gib.disableIfReferenceBranchMatches
- gib.disableBranchComparison
- gib.referenceBranch
- gib.fetchReferenceBranch
- gib.baseBranch
- gib.fetchBaseBranch
- gib.compareToMergeBase
- gib.uncommitted
- gib.untracked
- gib.skipIfPathMatches
- gib.excludePathsMatching
- gib.includePathsMatching
- gib.buildAll
- gib.buildAllIfNoChanges
- gib.buildDownstream
- gib.buildUpstream
- gib.buildUpstreamMode
- gib.skipTestsForUpstreamModules
- gib.argsForUpstreamModules
- gib.argsForDownstreamModules
- gib.forceBuildModules
- gib.excludeDownstreamModulesPackagedAs
- gib.disableSelectedProjectsHandling
- gib.failOnMissingGitDir
- gib.failOnError
- gib.logImpactedTo
- gib.logProjectsMode
To be able to use GIB, your project must use:
-
Apache Maven build tool, version 3.9.8 is recommended
- The minimum Maven version is 3.6.3 due to MNG-6580
-
Git version control
-
Java 11 (or higher)
ℹ️ If you need support for Maven <= 3.6.2 and/or Java < 11, you might want to consider using version 3 of GIB.
There are two usage scenarios of GIB:
ℹ️ This is the recommended way to configure GIB!
Add to (root) pom.xml:
<build>
<plugins>
<plugin>
<groupId>io.github.gitflow-incremental-builder</groupId>
<artifactId>gitflow-incremental-builder</artifactId>
<version>4.5.4</version>
<extensions>true</extensions>
<configuration>
<!-- ... -->
</configuration>
</plugin>
<!-- ... -->
</plugins>
<!-- ... -->
</build>The Configuration can then be added to the configuration block of the plugin (and/or via project or system properties).
When defined as a plugin, GIB will still do its work as an extension (see <extensions>true</extensions>).
The plugin definition is merely a "shell" to provide <profile>-support, better visibility of parameters and works around 3rd-party issues like
versions-maven-plugin: Support for reporting new extenions versions.
It only exists to generate a plugin descriptor so that you can see the parameters nicely in your IDE or via maven-help-plugin.
Because of this limitation, you have to use the general <configuration> section of the plugin instead of any <execution> block.
Add to (root) pom.xml:
<build>
<extensions>
<extension>
<groupId>io.github.gitflow-incremental-builder</groupId>
<artifactId>gitflow-incremental-builder</artifactId>
<version>4.5.4</version>
</extension>
</extensions>
<!-- ... -->
</build>Or use .mvn/extensions.xml.
If using .mvn/extensions.xml and Maven 3.8.8 or higher, it's strongly recommended to add <classLoadingStrategy>plugin</classLoadingStrategy> to the extension element. See MNG-7160 for more details.
In both cases the Configuration can then be added via project or system properties.
As IDEs like IntelliJ IDEA or Eclipse usually apply their own custom strategy to building changed modules, this extension should be disabled in such environments to avoid inconsistencies or errors (e.g. see issue 49).
See gib.disable in the configuration section.
ℹ️ If using IntelliJ IDEA, version 2019.3.1 or higher is required for GIB 3.8+ (even if disabled). See IDEA-200272 and issue 91 for more details.
Maven project parent has two submodules child1 and child2:
$ ls *
pom.xml
child1:
pom.xml src
child2:
pom.xml src
parent has gitflow-incremental-builder configured:
$ cat pom.xml
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>parent</groupId>
<artifactId>parent</artifactId>
<version>1.0-SNAPSHOT</version>
<packaging>pom</packaging>
<properties>
<gib.referenceBranch>refs/heads/develop</gib.referenceBranch>
</properties>
<modules>
<module>child1</module>
<module>child2</module>
</modules>
<build>
<extensions>
<extension>
<groupId>io.github.gitflow-incremental-builder</groupId>
<artifactId>gitflow-incremental-builder</artifactId>
<version>4.5.4</version>
</extension>
</extensions>
</build>
</project>
Currently checked out branch is feature. There is also a branch develop:
$ git branch
develop
* feature
Branches are the same now:
$ git diff develop
Thus incremental does not build and test anything (see gib.buildAllIfNoChanges for an alternate mode):
$ mvn test
[INFO] Scanning for projects...
[INFO] gitflow-incremental-builder starting...
[INFO] Git dir is: C:\Users\Vaclav\IdeaProjects\gitflow-incremental-builder\tmp\example\.git
[INFO] Head of branch HEAD is commit of id: commit 17b09f1f9ee9d2a56b7d7bf43d319db529cade9e 1483112738 -----p
[INFO] Head of branch refs/heads/develop is commit of id: commit 17b09f1f9ee9d2a56b7d7bf43d319db529cade9e 1483112738 -----p
[INFO] Using merge base of id: commit 17b09f1f9ee9d2a56b7d7bf43d319db529cade9e 1483112738 -tr-sp
[INFO] ------------------------------------------------------------------------
[INFO] Changed Artifacts:
[INFO]
[INFO]
[INFO] No changed artifacts to build. Executing validate goal only.
[INFO] gitflow-incremental-builder exiting...
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Build Order:
[INFO]
[INFO] child1
[INFO] child2
[INFO] parent
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building child1 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building child2 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building parent 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:
[INFO]
[INFO] child1 ............................................. SUCCESS [ 0.002 s]
[INFO] child2 ............................................. SUCCESS [ 0.001 s]
[INFO] parent ............................................. SUCCESS [ 0.000 s]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 0.953 s
[INFO] Finished at: 2016-12-30T16:56:35+01:00
[INFO] Final Memory: 9M/162M
[INFO] ------------------------------------------------------------------------
Now a file is written and added to git control making branches different:
$ echo "text" > child1/src/main/java/file1.txt
$ git add child1/src/main/java/file1.txt
$ git diff develop
diff --git a/child1/src/main/java/file1.txt b/child1/src/main/java/file1.txt
new file mode 100644
index 0000000..8e27be7
--- /dev/null
+++ b/child1/src/main/java/file1.txt
@@ -0,0 +1 @@
+text
warning: LF will be replaced by CRLF in child1/src/main/java/file1.txt.
The file will have its original line endings in your working directory.
Thus incremental build builds and tests only child1:
$ mvn test
[INFO] Scanning for projects...
[INFO] gitflow-incremental-builder starting...
[INFO] Git dir is: C:\Users\Vaclav\IdeaProjects\gitflow-incremental-builder\tmp\example\.git
[INFO] Head of branch HEAD is commit of id: commit 17b09f1f9ee9d2a56b7d7bf43d319db529cade9e 1483112738 -----p
[INFO] Head of branch refs/heads/develop is commit of id: commit 17b09f1f9ee9d2a56b7d7bf43d319db529cade9e 1483112738 -----p
[INFO] Using merge base of id: commit 17b09f1f9ee9d2a56b7d7bf43d319db529cade9e 1483112738 -tr-sp
[INFO] ------------------------------------------------------------------------
[INFO] Changed Artifacts:
[INFO]
[INFO] child1
[INFO]
[INFO] gitflow-incremental-builder exiting...
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building child1 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO]
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ child1 ---
[WARNING] Using platform encoding (Cp1250 actually) to copy filtered resources, i.e. build is platform dependent!
[INFO] skip non existing resourceDirectory C:\Users\Vaclav\IdeaProjects\gitflow-incremental-builder\tmp\example\child1\src\main\resources
[INFO]
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ child1 ---
[INFO] Changes detected - recompiling the module!
[WARNING] File encoding has not been set, using platform encoding Cp1250, i.e. build is platform dependent!
[INFO] Compiling 1 source file to C:\Users\Vaclav\IdeaProjects\gitflow-incremental-builder\tmp\example\child1\target\classes
[INFO]
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ child1 ---
[WARNING] Using platform encoding (Cp1250 actually) to copy filtered resources, i.e. build is platform dependent!
[INFO] skip non existing resourceDirectory C:\Users\Vaclav\IdeaProjects\gitflow-incremental-builder\tmp\example\child1\src\test\resources
[INFO]
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ child1 ---
[INFO] Changes detected - recompiling the module!
[WARNING] File encoding has not been set, using platform encoding Cp1250, i.e. build is platform dependent!
[INFO] Compiling 1 source file to C:\Users\Vaclav\IdeaProjects\gitflow-incremental-builder\tmp\example\child1\target\test-classes
[INFO]
[INFO] --- maven-surefire-plugin:2.12.4:test (default-test) @ child1 ---
[INFO] Surefire report directory: C:\Users\Vaclav\IdeaProjects\gitflow-incremental-builder\tmp\example\child1\target\surefire-reports
-------------------------------------------------------
T E S T S
-------------------------------------------------------
Running ATest
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.041 sec
Results :
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 2.043 s
[INFO] Finished at: 2016-12-30T17:01:56+01:00
[INFO] Final Memory: 18M/167M
[INFO] ------------------------------------------------------------------------
Maven pom properties configuration with default values is below:
<properties>
<gib.help>false</gib.help> <!-- or -Dgib.h=... -->
<gib.disable>false</gib.disable> <!-- or -Dgib.d=... -->
<gib.disableIfBranchMatches></gib.disableIfBranchMatches> <!-- or -Dgib.dibm=... -->
<gib.disableIfReferenceBranchMatches></gib.disableIfReferenceBranchMatches> <!-- or -Dgib.dirbm=... -->
<gib.disableBranchComparison>false</gib.disableBranchComparison> <!-- or -Dgib.dbc=... -->
<gib.referenceBranch>refs/remotes/origin/develop</gib.referenceBranch> <!-- or -Dgib.rb=... -->
<gib.fetchReferenceBranch>false</gib.fetchReferenceBranch> <!-- or -Dgib.frb=... -->
<gib.baseBranch>HEAD</gib.baseBranch> <!-- or -Dgib.bb=... -->
<gib.fetchBaseBranch>false</gib.fetchBaseBranch> <!-- or -Dgib.fbb=... -->
<gib.compareToMergeBase>true</gib.compareToMergeBase> <!-- or -Dgib.ctmb=... -->
<gib.uncommitted>true</gib.uncommitted> <!-- or -Dgib.uc=... -->
<gib.untracked>true</gib.untracked> <!-- or -Dgib.ut=... -->
<gib.skipIfPathMatches></gib.skipIfPathMatches> <!-- or -Dgib.sipm=... -->
<gib.excludePathsMatching></gib.excludePathsMatching> <!-- or -Dgib.epm=... -->
<gib.includePathsMatching></gib.includePathsMatching> <!-- or -Dgib.ipm=... -->
<gib.buildAll>false</gib.buildAll> <!-- or -Dgib.ba=... -->
<gib.buildAllIfNoChanges>false</gib.buildAllIfNoChanges> <!-- or -Dgib.bainc=... -->
<gib.buildDownstream>always</gib.buildDownstream> <!-- or -Dgib.bd=... -->
<gib.buildUpstream>derived</gib.buildUpstream> <!-- or -Dgib.bu=... -->
<gib.buildUpstreamMode>changed</gib.buildUpstreamMode> <!-- or -Dgib.bum=... -->
<gib.skipTestsForUpstreamModules>false</gib.skipTestsForUpstreamModules> <!-- or -Dgib.stfum=... -->
<gib.argsForUpstreamModules></gib.argsForUpstreamModules> <!-- or -Dgib.afum=... -->
<gib.argsForDownstreamModules></gib.argsForDownstreamModules> <!-- or -Dgib.afdm=... -->
<gib.forceBuildModules></gib.forceBuildModules> <!-- or -Dgib.fbm=... -->
<gib.excludeDownstreamModulesPackagedAs></gib.excludeDownstreamModulesPackagedAs> <!-- or -Dgib.edmpa=... -->
<gib.disableSelectedProjectsHandling>false</gib.disableSelectedProjectsHandling> <!-- or -Dgib.dsph=... -->
<gib.failOnMissingGitDir>true</gib.failOnMissingGitDir> <!-- or -Dgib.fomgd=... -->
<gib.failOnError>true</gib.failOnError> <!-- or -Dgib.foe=... -->
<gib.logImpactedTo></gib.logImpactedTo> <!-- or -Dgib.lit=... -->
<gib.logProjectsMode>changed</gib.logProjectsMode> <!-- or -Dgib.lpm=... -->
</properties>Each property can also be set via -D on the command line and to reduce typing to a minimum, each property has a short name (see code block above).
E.g. -Dgib.d=true yields the same result as -Dgib.disable=true.
Properties that support the value true can be specified without a value, e.g. -Dgib.disable is the same as -Dgib.disable=true.
System properties (-D) take precedence over project properties from the POM and secondarily to that a full name takes precedence over the respective short name.
Short names can only be used as system properties.
If GIB is used as a plugin (instead of an extension), the same properties can still be used but it is recommended
to put the properties into the plugin <configuration>-section, but without the gib.-prefix.
E.g. instead of:
<properties>
<gib.uncommitted>true</gib.uncommitted>
</properties>use:
<configuration>
<uncommitted>true</uncommitted>
</configuration>Just like for regular plugins, a plugin config property that is set to a fixed value cannot be changed via the respective system property (here: -Dgib.uncommitted=false).
Logs the available properties etc.
Note: Independent of gib.disable.
Since: 3.9.0
Can be used to disable this extension temporarily or permanently (e.g. to avoid clashes with IDE building strategy).
Since: 3.11.2 (replaces previously used enabled property)
Can be used to disable this extension on certain branches (e.g. main|develop). By default, GIB runs on all branches.
Since: 3.11.0
Was renamed from disableIfBranchRegex in 3.13.0.
Can be used to disable this extension on certain reference branches (e.g. origin/(main|develop)). By default, GIB runs for all reference branches.
See also: gib.referenceBranch
Since: 3.14.2
Disables the comparison between baseBranch and referenceBranch. This property should be enabled if only uncommitted and/or untracked files shall be detected to only build projects that have been changed since the last commit in the current branch (see gib.uncommitted and gib.untracked).
The following properties are not evaluated when gib.disableBranchComparison is enabled:
gib.referenceBranchgib.compareToMergeBasegib.fetchReferenceBranch
The branch to compare baseBranch to. You can use the simple branch name to compare against a local branch, e.g. develop.
If you want to compare to a remote branch you need to use the prefix refs/remotes/<remoteName>/, e.g. refs/remotes/origin/develop.
You can also use a tag name, e.g. refs/tags/myTag or just myTag.
Fetches the referenceBranch from the remote repository.
You must use the prefix refs/remotes/<remoteName>/, e.g. refs/remotes/origin/develop, so that GIB can determine the remote repo name.
Alternatively, since 3.15.0, you can also fetch tags via refs/tags/<tagName>.
See also: Authentication
The branch that is compared to referenceBranch. Usually just the current HEAD.
See also: gib.referenceBranch
Fetches the baseBranch from the remote repository.
See also:
Controls whether or not to the merge-base mechanism to compare the branches.
Detects changed files that have not yet been committed. This does not include untracked files (see git status manual).
Detects files that are not yet tracked by git (see git status manual). This does not include uncommitted files. A new file is not untracked anymore after it is added to the index.
Can be used to skip this extension on certain changes. By default, no changed file results in GIB being skipped.
This property is helpful for more complex project setups in which not all submodules depend on the root module (= are not direct or indirect children of the root module).
In such a case, GIB will assign a change to e.g. .github/workflows/ci.yml to the root module, building all modules that depend on the root module.
Consequently, this will not include the other modules that are referenced top-down from root, but not bottom-up via <parent>...</parent>.
One example of such modules are the independent-projects of Quarkus.
By setting this property to e.g. \.github[/\\].* you can tell GIB that this path has a global effect and that it's pointless to attempt an incremental build.
ℹ️ Use [/\\] instead of just / to also cover Windows path separators.
Since: 3.12.2
Can be used to exclude certain changed files from being detected as changed, reducing the number of modules to build. By default, nothing is excluded.
The regular expression does not need to describe the entire (absolute) path, but only the relevant part inside the git repository context. Example:
/tmp/repo/excluded/some-file.txt
will be excluded when using -Dgib.excludePathsMatching=.*excluded.* or -Dgib.excludePathsMatching=.*some-file\..* etc., but is not excluded when adding to the regular expression anything outside of the git repository context like /tmp/repo or repo.
This the opposite of gib.includePathsMatching which can be combined with this property, but gib.excludePathsMatching will take precedence.
ℹ️ Use [/\\] instead of just / to also cover Windows path separators.
Was renamed from excludePathRegex in 3.13.0.
Can be used to include only certain changed files from being detected as changed, reducing the number of modules to build. By default, everything is included.
This the opposite of gib.excludePathsMatching which can be combined with this property, but gib.excludePathsMatching will take precedence.
See gib.excludePathsMatching for general path matching rules.
ℹ️ Use [/\\] instead of just / to also cover Windows path separators.
Since: 3.10.0
Was renamed from includePathRegex in 3.13.0.
Builds all modules, including upstream modules (see also gib.buildUpstream). Can be used to (temporarily) override the reduction of modules to build.
Can be combined/useful with gib.skipTestsForUpstreamModules and/or gib.argsForUpstreamModules.
In case no changes are detected, GIB will (by default) just invoke goal validate in the "current project" (usually the root module), skipping any submodules.
If this property is enabled, GIB will instead auto-activate gib.buildAll for all modules and will leave the goals untouched.
This property is ignored when explicitly selected projects are involved.
Since: 3.9.2
Controls whether or not to build downstream modules (= modules that depend on the modules GIB detected as changed):
alwaysortrue(default value): always build downstream modules (depends on-amdwhen-plis used)derived: only build downstream modules ifmvn -amdis calledneverorfalse: never build downstream modules
Since: 3.8
Controls whether or not to build upstream modules (= dependencies and parents of the modules GIB has determined to build):
alwaysortrue: always build upstream modules (depends on-amwhen-plis used)derived(default value): only build upstream modules ifmvn -amis calledneverorfalse: never build upstream modules
See also gib.buildUpstreamMode.
Since: 3.8
This property controls which upstream modules to build (if at all building upstream modules, see gib.buildUpstream):
changed(default value): selects only upstream modules of the directly changed modulesimpacted: likechangedbut also selects upstream modules of modules that depend on the directly changed modules (in other words: upstream modules of the downstream modules of the changed modules)
changed is a subset of impacted.
impacted may seem odd at first, but it does come in handy in certain scenarios, e.g. a Jenkins PR job that locally merges target branch into the PR branch before building.
Here it might be required to freshly compile upstream modules of not directly changed modules to avoid compile errors or test failures which originate from the target branch.
Both strategies can and usually should be combined with gib.skipTestsForUpstreamModules and/or gib.argsForUpstreamModules.
This property is ignored when explicitly selected projects are involved.
Note: Before 3.8, GIB did non have this property and was implicitly applying the impacted strategy, see also issue 44.
Since: 3.8
This property disables the compilation/execution of tests for upstream modules by adding maven.test.skip=true. In case an upstream module produces a test jar just the test execution is disabled via skipTests=true.
See gib.buildUpstream or gib.buildAll to learn when upstream modules are built.
Can be combined with gib.argsForUpstreamModules.
This property allows adding arbitrary arguments/properties for upstream modules to further reduce overhead, e.g. skip Checkstyle or Enforcer plugin. Arguments have to be sparated with a single space character and values are optional. Example:
mvn clean install -am -Dgib.argsForUpstreamModules='enforcer.skip checkstyle.skip=true'
(notice the missing -D)
See gib.buildUpstream or gib.buildAll to learn when upstream modules are built.
Can be combined with gib.skipTestsForUpstreamModules.
This property allows adding arbitrary arguments/properties for downstream modules to e.g. run them with a smaller testset than the directly changed modules. Only unchanged downstream modules are affected by this setting. Arguments have to be sparated with a single space character and values are optional. Example:
mvn clean install -am -Dgib.argsForDownstreamModules='testprofile=small'
(notice the missing -D)
See gib.buildDownstream or gib.buildAll to learn when upstream modules are built.
Since: 4.2.0
Defines artifact ids of modules to build forcibly, even if these modules have not been changed and/or do not depend on changed modules. Example:
mvn clean install -Dgib.forceBuildModules=unchanged-module-1,unchanged-module-2
Regular expressions are also supported in each comma separated part, e.g.:
mvn clean install -Dgib.forceBuildModules=unchanged-module-.*,another-module
Each of these modules is subject to argsForUpstreamModules and skipTestsForUpstreamModules.
This property has no effect in case buildAll is enabled.
Additionally (since 3.14.4), forced modules can be defined conditionally, e.g.:
changed-module=unchanged-module-1|unchanged-module-2
will build unchanged-module-1 and unchanged-module-2 only if changed-module was changed (or depends on changed modules).
There can be multiple such key=value pairs, fully supporting regular expressions and you can mix both flavors, e.g.:
another-module, changed-module=unchanged-module-1|unchanged-module-2, .*-core-module=lib-.*-module, test-.*
Note: , and = are reserved delimiters and can therefore not be used in artifact id strings/patterns.
Defines the packaging (e.g. jar) of modules that depend on changed modules but shall not be built.
One possible use case for this is mainly working in an IDE, fixing all compile errors etc. and then just quickly building the least possible amount of modules
which are needed to (hot-)deploy the changes via mvn on the command line.
In this scenario, by defining -Dgib.excludeDownstreamModulesPackagedAs=jar,pom, only the directly changed jar modules and the dependent war and/or ear
deployment modules will be built.
This property has no effect in case buildAll is enabled and an exclusion might be overridden by gib.forceBuildModules.
Disables special handling of explicitly selected projects (-pl, -f etc.).
This can come in handy if you select just one module with -pl but you only want to have it built fully (with tests etc.)
if the selected module itself is changed or one of its (non-selected) upstream modules.
Since: 3.12.0
Controls whether or not to fail on missing .git directory.
Controls whether or not to fail on any error.
Defines an optional logfile which GIB shall write all "impacted" modules to. Each line represents the base directory of a changed module or a downstream module of a changed module.
GIB overwrites the file if it already exists and will create an empty file in case no changes are detected.
Starting with 4.5.0, GIB does also write the actually built modules to this file:
- if only explicitly selected projects are present
- or if Maven is building non-recursively (
-N) - or if Maven is building only a single leaf module
Before 4.5.0 GIB only created an empty file in those cases.
Starting with 4.5.0, GIB will always remove the file first (unless disabled via any of the disabled* properties), so that cases like skipIfPathMatches don't leave behind an empty file which could be misinterpreted as "no changes are detected".
Since: 3.10.1
Controls which projects to log to the console. Default is changed, other options are none, impacted (changed + downstream) and all (including upstream).
Since: 4.5.0
By default, GIB tries not to interfere with any projects/modules that have been selected explicitly by the user.
The details are described in the following subsections. This special handling can be disabled via gib.disableSelectedProjectsHandling.
Since 3.10.0, special rules apply when mvn -pl ... (or --projects ...) is used:
-
Every such "preselected" project is always built, including tests etc., regardless of being changed or not!
-
Downstream projects of these selected projects are built if:
-amd(--also-make-dependents) is used- and:
buildDownstreamis notneverorfalse- or
buildAllis enabled
-
Upstream projects of these selected projects are built if:
-am(--also-make) is used- and:
buildUpstreamis notneverorfalse- or
buildAllis enabled
Other properties/features are applied as usual to the resulting subset of modules/projects.
Since 3.10.1, "deselected" projects (mvn -pl !...) that contain changes will not be built, but their up- and downstream projects will be built
(if not also deselected).
Since 3.10.0, GIB will always build a "leaf module" that is selected via mvn -f ... (or --file ...), regardless of being changed or not!
A "leaf module" is a module without submodules.
The same applies if the current directory is changed from the root directory of the multi-module-project to the leaf module subdirectory via cd.
In contrast, a module with submodules that is selected via -f or via cd is subject to the regular change detection rules (unless -pl or -N is added).
Since 3.10.2, GIB will always build a "node module" when non-recursive build is activated via mvn -N (or --non-recursive), regardless of being changed or not!
A "node module" is a module with submodules.
Maven does not consider modules importing a BOM (bill of material) via dependencyManagement as downstream modules of that BOM module.
This effectively means that (without GIB) you cannot just change e.g. a dependency version in the BOM and run mvn -pl bom -amd as this will only build bom.
To close this "gap", GIB adds downstream detection for BOM modules so that your Dependabot PRs or similar can trigger a proper incremental builds.
If a module contains changes only within src/test, GIB will not build any of its downstream modules unless that module defines a
test-jar goal and those downstream modules are depending on that jar.
When using gib.fetchBaseBranch or gib.fetchReferenceBranch, GIB provides basic support to authenticate against a possibly protected remote repository.
For HTTP(S), GIB will query the credentials from the local native Git executable via git credential fill.
These credentials are then forwarded to JGit and are not persisted in any way. GIB will only cache the credentials transiently for a very short time and will actively remove them as soon as possible.
See also HttpDelegatingCredentialsProvider.
Since git credential fill will trigger all configured credential helpers (if any), you might see a popup dialog box asking for credentials.
This only happens in case the respective helper was not able to provide the credentials. Such a dialog box is not created by GIB, instead it is spawned by a configured credential helper!
As GIB does not (yet) provide a console input passthrough mechanism to native Git, console input queries by native Git are disabled. This means that if no credential helper is configured, GIB will not be able to fetch via HTTP(S) from a remote repo that requires authentication.
For SSH, GIB pretty much relies on JGit SSH agent support via Apache MINA sshd.
Your private key will be picked up automatically in case it is located in ~/.ssh/ (as identity, id_rsa or id_dsa).
To use a custom key, create a SSH config in ~/.ssh/config like the following:
Host git.somedomain.org
IdentityFile ~/.ssh/my_key
If your key is protected by a passphrase, you will have to use a SSH agent (ssh-agent on Linux or pageant from PuTTY on Windows) and add your key(s) to it.
GIB relies on SSH Agent Support as provided by JGit 6.0+.
Hint: When using an agent, you don't need to put your key in a standard location, you don't need ~/.ssh/config and your key is also not required to be passphrase protected.