Skip to content

Base Station Piksi Multi Firmware v2.3.19

Jump to bottom
Rik Baehnemann edited this page Oct 3, 2019 · 1 revision

Please load and inspect the settings in utils/piksi_multi_config/config_base_2_3_19.ini. These settings assume UART1 (230000), USB or Ethernet are connected to the PC and a modem is connected to UART0 (115200) of the Piksi Multi.

To upload the config to the board, open Piksi console, navigate to "Setting" tab, press "Import from File" and load the desired file.

Be aware that you may break the connection to the console if you change the Baud rate while being connected through UART.

Clone this wiki locally