Conversation
geoknee
approved these changes
Jan 13, 2026
joshklop
force-pushed
the
joshklop/reduce-diff
branch
from
d12f591 to
1ae742c
Compare
geoknee
approved these changes
Jan 13, 2026
louisliu2048
added a commit
to okx/op-geth
that referenced
this pull request
Jan 15, 2026
* version: begin v1.16.5 release cycle * internal/ethapi: fix outdated comments (#32751) Fix outdated comments * ethapi: reject oversize storage keys before hex decode (#32750) Bail out of decodeHash when the raw hex string is longer than 32 byte before actually decoding. --------- Co-authored-by: lightclient <lightclient@protonmail.com> * signer/core: fix TestSignTx to decode res2 (#32749) Decode the modified transaction and verify the value differs from original. --------- Co-authored-by: lightclient <lightclient@protonmail.com> * trie: correct error messages for UpdateStorage operations (#32746) Fix incorrect error messages in TestVerkleTreeReadWrite and TestVerkleRollBack functions. * eth/tracers/native: add keccak256preimage tracer (#32569) Introduces a new tracer which returns the preimages of evm KECCAK256 hashes. See #32570. --------- Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com> Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com> * params: add amsterdam fork config (#32687) Adds Amsterdam as fork config option. Co-authored-by: lightclient <lightclient@protonmail.com> * build: remove duplicated func FileExist (#32768) * eth/catalyst: check osaka in engine_getBlobsV1 (#32731) ref https://github.com/ethereum/execution-apis/blob/main/src/engine/osaka.md#cancun-api > Client software MUST return -38005: Unsupported fork error if the Osaka fork has been activated. --------- Signed-off-by: Delweng <delweng@gmail.com> Co-authored-by: rjl493456442 <garyrong0905@gmail.com> * trie: fix error message in test (#32772) Fixes an error message in TestReplication * internal/ethapi: remove redundant check in test (#32760) Removes a redundant check in TestCreateAccessListWithStateOverrides * cmd/evm/internal/t8ntool: panic on database corruption (#32776) These functions were previously ignoring the error returned by both `statedb.Commit()` and the subsequent `state.New()`, which could silently fail and cause panics later when the `statedb` is used. This change adds proper error checking and panics with a descriptive error message if state creation fails. While unlikely in normal operation, this can occur if there are database corruption issues or if invalid root hashes are provided, making debugging significantly easier when such issues do occur. This issue was encountered and fixed in gballet/go-ethereum#552 where the error handling proved essential for debugging cc: @gballet as this was discussed in a call already. * params: fix bpo config comments (#32755) Looks like we forgot to update names when copying. * core/rawdb: update comments (#32668) - Replace outdated NewFreezer doc that referenced map[string]bool/snappy toggle with accurate description of -map[string]freezerTableConfig (noSnappy, prunable). - Fix misleading field comment on freezerTable.config that spoke as if it were a boolean (“if true”), clarifying it’s a struct and noting compression is non-retroactive. * params: implement String() method for ChainConfig (#32766) Fixes issue #32762 where ChainConfig logging displays pointer addresses instead of actual timestamp values for fork activation times. Before: ShanghaiTime:(*uint64)(0xc000373fb0), CancunTime:(*uint64)(0xc000373fb8) After: ShanghaiTime: 1681338455, CancunTime: 1710338135, VerkleTime: nil The String() method properly dereferences timestamp pointers and handles nil values for unset fork times, making logs more readable and useful for debugging chain configuration issues. --------- Co-authored-by: rjl493456442 <garyrong0905@gmail.com> * params: add blob config information in the banner (#32771) Extend the chain banner with blob config information. Co-authored-by: Felix Lange <fjl@twurst.com> * core/txpool: remove unused signer field from TxPool (#32787) The TxPool.signer field was never read and each subpool (legacy/blob) maintains its own signer instance. This field remained after txpool refactoring into subpools and is dead code. Removing it reduces confusion and simplifies the constructor. * core/state: correct expected value in TestMessageCallGas (#32780) * go.mod, cmd/keeper/go.mod: upgrade victoria metrics dependency (#32720) This is required for geth to compile to WASM. * eth/catalyst: extend payloadVersion support to osaka/post-osaka forks (#32800) This PR updates the `payloadVersion` function in `simulated_beacon.go` to handle additional following forks used during development and testing phases after Osaka. This change ensures that the simulated beacon correctly resolves the payload version for these forks, enabling consistent and valid execution payload handling during local testing or simulation. * p2p: fix error message in test (#32804) * signer/core: fix error message in test (#32807) * params: fix banner message (#32796) * core/types, trie: reduce allocations in derivesha (#30747) Alternative to #30746, potential follow-up to #30743 . This PR makes the stacktrie always copy incoming value buffers, and reuse them internally. Improvement in #30743: ``` goos: linux goarch: amd64 pkg: github.com/ethereum/go-ethereum/core/types cpu: 12th Gen Intel(R) Core(TM) i7-1270P │ derivesha.1 │ derivesha.2 │ │ sec/op │ sec/op vs base │ DeriveSha200/stack_trie-8 477.8µ ± 2% 430.0µ ± 12% -10.00% (p=0.000 n=10) │ derivesha.1 │ derivesha.2 │ │ B/op │ B/op vs base │ DeriveSha200/stack_trie-8 45.17Ki ± 0% 25.65Ki ± 0% -43.21% (p=0.000 n=10) │ derivesha.1 │ derivesha.2 │ │ allocs/op │ allocs/op vs base │ DeriveSha200/stack_trie-8 1259.0 ± 0% 232.0 ± 0% -81.57% (p=0.000 n=10) ``` This PR further enhances that: ``` goos: linux goarch: amd64 pkg: github.com/ethereum/go-ethereum/core/types cpu: 12th Gen Intel(R) Core(TM) i7-1270P │ derivesha.2 │ derivesha.3 │ │ sec/op │ sec/op vs base │ DeriveSha200/stack_trie-8 430.0µ ± 12% 423.6µ ± 13% ~ (p=0.739 n=10) │ derivesha.2 │ derivesha.3 │ │ B/op │ B/op vs base │ DeriveSha200/stack_trie-8 25.654Ki ± 0% 4.960Ki ± 0% -80.67% (p=0.000 n=10) │ derivesha.2 │ derivesha.3 │ │ allocs/op │ allocs/op vs base │ DeriveSha200/stack_trie-8 232.00 ± 0% 37.00 ± 0% -84.05% (p=0.000 n=10) ``` So the total derivesha-improvement over *both PRS* is: ``` goos: linux goarch: amd64 pkg: github.com/ethereum/go-ethereum/core/types cpu: 12th Gen Intel(R) Core(TM) i7-1270P │ derivesha.1 │ derivesha.3 │ │ sec/op │ sec/op vs base │ DeriveSha200/stack_trie-8 477.8µ ± 2% 423.6µ ± 13% -11.33% (p=0.015 n=10) │ derivesha.1 │ derivesha.3 │ │ B/op │ B/op vs base │ DeriveSha200/stack_trie-8 45.171Ki ± 0% 4.960Ki ± 0% -89.02% (p=0.000 n=10) │ derivesha.1 │ derivesha.3 │ │ allocs/op │ allocs/op vs base │ DeriveSha200/stack_trie-8 1259.00 ± 0% 37.00 ± 0% -97.06% (p=0.000 n=10) ``` Since this PR always copies the incoming value, it adds a little bit of a penalty on the previous insert-benchmark, which copied nothing (always passed the same empty slice as input) : ``` goos: linux goarch: amd64 pkg: github.com/ethereum/go-ethereum/trie cpu: 12th Gen Intel(R) Core(TM) i7-1270P │ stacktrie.7 │ stacktrie.10 │ │ sec/op │ sec/op vs base │ Insert100K-8 88.21m ± 34% 92.37m ± 31% ~ (p=0.280 n=10) │ stacktrie.7 │ stacktrie.10 │ │ B/op │ B/op vs base │ Insert100K-8 3.424Ki ± 3% 4.581Ki ± 3% +33.80% (p=0.000 n=10) │ stacktrie.7 │ stacktrie.10 │ │ allocs/op │ allocs/op vs base │ Insert100K-8 22.00 ± 5% 26.00 ± 4% +18.18% (p=0.000 n=10) ``` --------- Co-authored-by: Gary Rong <garyrong0905@gmail.com> Co-authored-by: Felix Lange <fjl@twurst.com> * p2p/enode: fix discovery AyncFilter deadlock on shutdown (#32572) Description: We found a occasionally node hang issue on BSC, I think Geth may also have the issue, so pick the fix patch here. The fix on BSC repo: bnb-chain/bsc#3347 When the hang occurs, there are two routines stuck. - routine 1: AsyncFilter(...) On node start, it will run part of the DiscoveryV4 protocol, which could take considerable time, here is its hang callstack: ``` goroutine 9711 [chan receive]: // this routine was stuck on read channel: `<-f.slots` github.com/ethereum/go-ethereum/p2p/enode.AsyncFilter.func1() github.com/ethereum/go-ethereum/p2p/enode/iter.go:206 +0x125 created by github.com/ethereum/go-ethereum/p2p/enode.AsyncFilter in goroutine 1 github.com/ethereum/go-ethereum/p2p/enode/iter.go:192 +0x205 ``` - Routine 2: Node Stop It is the main routine to shutdown the process, but it got stuck when it tries to shutdown the discovery components, as it tries to drain the channel of `<-f.slots`, but the extra 1 slot will never have chance to be resumed. ``` goroutine 11796 [chan receive]: github.com/ethereum/go-ethereum/p2p/enode.(*asyncFilterIter).Close.func1() github.com/ethereum/go-ethereum/p2p/enode/iter.go:248 +0x5c sync.(*Once).doSlow(0xc032a97cb8?, 0xc032a97d18?) sync/once.go:78 +0xab sync.(*Once).Do(...) sync/once.go:69 github.com/ethereum/go-ethereum/p2p/enode.(*asyncFilterIter).Close(0xc092ff8d00?) github.com/ethereum/go-ethereum/p2p/enode/iter.go:244 +0x36 github.com/ethereum/go-ethereum/p2p/enode.(*bufferIter).Close.func1() github.com/ethereum/go-ethereum/p2p/enode/iter.go:299 +0x24 sync.(*Once).doSlow(0x11a175f?, 0x2bfe63e?) sync/once.go:78 +0xab sync.(*Once).Do(...) sync/once.go:69 github.com/ethereum/go-ethereum/p2p/enode.(*bufferIter).Close(0x30?) github.com/ethereum/go-ethereum/p2p/enode/iter.go:298 +0x36 github.com/ethereum/go-ethereum/p2p/enode.(*FairMix).Close(0xc0004bfea0) github.com/ethereum/go-ethereum/p2p/enode/iter.go:379 +0xb7 github.com/ethereum/go-ethereum/eth.(*Ethereum).Stop(0xc000997b00) github.com/ethereum/go-ethereum/eth/backend.go:960 +0x4a github.com/ethereum/go-ethereum/node.(*Node).stopServices(0xc0001362a0, {0xc012e16330, 0x1, 0xc000111410?}) github.com/ethereum/go-ethereum/node/node.go:333 +0xb3 github.com/ethereum/go-ethereum/node.(*Node).Close(0xc0001362a0) github.com/ethereum/go-ethereum/node/node.go:263 +0x167 created by github.com/ethereum/go-ethereum/cmd/utils.StartNode.func1.1 in goroutine 9729 github.com/ethereum/go-ethereum/cmd/utils/cmd.go:101 +0x78 ``` The rootcause of the hang is caused by the extra 1 slot, which was designed to make sure the routines in `AsyncFilter(...)` can be finished. This PR fixes it by making sure the extra 1 shot can always be resumed when node shutdown. * core: refactor StateProcessor to accept ChainContext interface (#32739) This pr implements ethereum/go-ethereum#32733 to make StateProcessor more customisable. ## Compatibility notes This introduces a breaking change to users using geth EVM as a library. The `NewStateProcessor` function now takes one parameter which has the chainConfig embedded instead of 2 parameters. * p2p/enode: fix asyncfilter comment (#32823) just finisher the sentence Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com> * trie: cleaner array concatenation (#32756) It uses the slices.Concat and slices.Clone methods available now in Go. * internal/ethapi: add timestamp to logs in eth_simulate (#32831) Adds blockTimestamp to the logs in response of eth_simulateV1. --------- Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com> * build: faster gh actions workflow, no ubuntu on appveyor (#32829) This PR does a few things: - Sets the gh actions runner sizes for lint (s) and test (l) workflows - Runs the tests on gh actions in parallel - Skips fetching the spec tests when unnecessary (on windows in appveyor) - Removes ubuntu appveyor runner since it's essentially duplicate of the gh action workflow now The gh test seems to go down from ~35min to ~13min. * cmd/devp2p/internal/ethtest: update to PoS-only test chain (#32850) * core/rawdb: remove duplicated type storedReceiptRLP (#32820) Co-authored-by: Felix Lange <fjl@twurst.com> * eth/protocols/eth: use BlockChain interface in Handshake (#32847) * cmd/devp2p/internal/ethtest: accept responses in any order (#32834) In both `TestSimultaneousRequests` and `TestSameRequestID`, we send two concurrent requests. The client under test is free to respond in either order, so we need to handle responses both ways. Also fixes an issue where some generated blob transactions didn't have any blobs. --------- Co-authored-by: Felix Lange <fjl@twurst.com> * core/rawdb: correct misleading comments for state history accessors (#32783) * eth/filters: terminate pending tx subscription on error (#32794) Fixes issue #32793. When the pending tx subscription ends, the filter is removed from `api.filters`, but it is not terminated. There is no other way to terminate it, so the subscription will leak, and potentially block the producer side. * eth/filters: add `transactionReceipts` subscription (#32697) - Introduce a new subscription kind `transactionReceipts` to allow clients to receive transaction receipts over WebSocket as soon as they are available. - Accept optional `transactionHashes` filter to subscribe to receipts for specific transactions; an empty or omitted filter subscribes to all receipts. - Preserve the same receipt format as returned by `eth_getTransactionReceipt`. - Avoid additional HTTP polling, reducing RPC load and latency. --------- Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com> * core/txpool/legacypool: fix validTxMeter to count transactions (#32845) invalidTxMeter was counting txs, while validTxMeter was counting accounts. Better make the two comparable. --------- Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com> * eth/protocols/snap: optimize incHash (#32748) * core/rawdb, triedb/pathdb: introduce trienode history (#32596) It's a pull request based on the #32523 , implementing the structure of trienode history. * ethclient: add SubscribeTransactionReceipts (#32869) Add `SubscribeTransactionReceipts` for ethclient. This is a complement to ethereum/go-ethereum#32697. * node: fix error condition in gzipResponseWriter.init() (#32896) * core/types: optimize MergeBloom by using bitutil (#32882) ``` goos: darwin goarch: amd64 pkg: github.com/ethereum/go-ethereum/core/types cpu: VirtualApple @ 2.50GHz │ old.txt │ new.txt │ │ sec/op │ sec/op vs base │ CreateBloom/small-createbloom-10 1.676µ ± 4% 1.646µ ± 1% -1.76% (p=0.000 n=10) CreateBloom/large-createbloom-10 164.8µ ± 3% 164.3µ ± 0% ~ (p=0.247 n=10) CreateBloom/small-mergebloom-10 231.60n ± 0% 68.00n ± 0% -70.64% (p=0.000 n=10) CreateBloom/large-mergebloom-10 21.803µ ± 3% 5.107µ ± 1% -76.58% (p=0.000 n=10) geomean 6.111µ 3.113µ -49.06% │ old.txt │ new.txt │ │ B/op │ B/op vs base │ CreateBloom/small-createbloom-10 112.0 ± 0% 112.0 ± 0% ~ (p=1.000 n=10) ¹ CreateBloom/large-createbloom-10 10.94Ki ± 0% 10.94Ki ± 0% ~ (p=0.474 n=10) CreateBloom/small-mergebloom-10 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=10) ¹ CreateBloom/large-mergebloom-10 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=10) ¹ geomean ² +0.00% ² ¹ all samples are equal ² summaries must be >0 to compute geomean │ old.txt │ new.txt │ │ allocs/op │ allocs/op vs base │ CreateBloom/small-createbloom-10 6.000 ± 0% 6.000 ± 0% ~ (p=1.000 n=10) ¹ CreateBloom/large-createbloom-10 600.0 ± 0% 600.0 ± 0% ~ (p=1.000 n=10) ¹ CreateBloom/small-mergebloom-10 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=10) ¹ CreateBloom/large-mergebloom-10 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=10) ¹ geomean ² +0.00% ² ¹ all samples are equal ² summaries must be >0 to compute geomean ``` * p2p: rm unused var seedMinTableTime (#32876) * eth/filters: uninstall subscription in filter apis on error (#32894) Fix ethereum/go-ethereum#32893. In the previous ethereum/go-ethereum#32794, it only handles the pending tx filter, while there are also head and log filters. This PR applies the patch to all filter APIs and uses `defer` to maintain code consistency. * triedb, core/rawdb: implement the partial read in freezer (#32132) This PR implements the partial read functionalities in the freezer, optimizing the state history reader by resolving less data from freezer. --------- Signed-off-by: jsvisa <delweng@gmail.com> Co-authored-by: Gary Rong <garyrong0905@gmail.com> * p2p/enode: optimize LogDist (#32887) This speeds up LogDist by 75% using 64-bit operations instead of byte-wise XOR. --------- Co-authored-by: Felix Lange <fjl@twurst.com> * p2p/enode: optimize DistCmp (#32888) This speeds up DistCmp by 75% through using 64-bit operations instead of byte-wise XOR. * core/txpool/legacypool: move queue out of main txpool (#32270) This PR move the queue out of the main transaction pool. For now there should be no functional changes. I see this as a first step to refactor the legacypool and make the queue a fully separate concept from the main pending pool. --------- Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com> Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com> * cmd/workload: filter fuzzer test (#31613) This PR adds a `filterfuzz` subcommand to the workload tester that generates requests similarly to `filtergen` (though with a much smaller block length limit) and also verifies the results by retrieving all block receipts in the range and locally filtering out relevant results. Unlike `filtergen` that operates on the finalized chain range only, `filterfuzz` does check the head region, actually it seeds a new query at every new chain head. * p2p/discover: wait for bootstrap to be done (#32881) This ensures the node is ready to accept other nodes into the table before it is used in a test. Closes #32863 * triedb/pathdb: catch int conversion overflow in 32-bit (#32899) The limit check for `MaxUint32` is done after the cast to `int`. On 64 bits machines, that will work without a problem. On 32 bits machines, that will always fail. The compiler catches it and refuses to build. Note that this only fixes the compiler build. ~~If the limit is above `MaxInt32` but strictly below `MaxUint32` then this will fail at runtime and we have another issue.~~ I checked and this should not happen during regular execution, although it might happen in tests. * eth/catalyst: remove useless log on enabling Engine API (#32901) * eth: do not warn on switching from snap sync to full sync (#32900) This happens normally after a restart, so it is better to use Info level here. Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com> * core/txpool/legacypool: fix pricedList updates (#32906) This pr addresses a few issues brought by the #32270 - Add updates to pricedList after dropping transactions. - Remove redundant deletions in queue.evictList, since pool.removeTx(hash, true, true) already performs the removal. - Prevent duplicate addresses during promotion when Reset is not nil. * accounts/abi: check presence of payable fallback or receive before proceeding with transfer (#32374) remove todo * internal/ethapi: convert legacy blobtx proofs in sendRawTransaction (#32849) This adds a temporary conversion path for blob transactions with legacy proof sidecar. This feature will activate after Fusaka. We will phase this out when the fork has sufficiently settled and client side libraries have been upgraded to send the new proofs. * rpc: fix flaky test TestServerWebsocketReadLimit (#32889) * eth/protocols/eth: reject message containing duplicated txs and drop peer (#32728) Drop peer if sending the same transaction multiple times in a single message. Fixes ethereum/go-ethereum#32724 --------- Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com> Co-authored-by: Gary Rong <garyrong0905@gmail.com> Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com> * p2p/discover: remove hot-spin in table refresh trigger (#32912) This fixes a regression introduced in #32518. In that PR, we removed the slowdown logic that would throttle lookups when the table runs empty. Said logic was originally added in #20389. Usually it's fine, but there exist pathological cases, such as hive tests, where the node can only discover one other node, so it can only ever query that node and won't get any results. In cases like these, we need to throttle the creation of lookups to avoid crazy CPU usage. * version: release go-ethereum v1.16.5 stable * params: Set JovianTime to zero in OptimismTestConfig (ethereum-optimism#742) * params: Set JovianTime to zero and remove Osaka in OptimismTestConfig * Unset OsakaTime in OptimismTestConfig * Fix `eth_simulateV1` after Jovian fork (ethereum-optimism#732) * fix(eth_simulatev1): Create synthetic Jovian Deposit TX, to not fail in the CalcDAFootprint() function. * fix(eth_simulatev1): Return block without synthetic Jovian deposit tx. * fix(eth_simulatev1): Extract JovianDepositTx() from tests, activate Jovian fork based on parent.Time. * Inject L1 attributes tx in Optimism simulation * Unexport JovianDepositTx and move to tests Remove exported JovianDepositTx from core/types and add a local jovianDepositTx helper in miner tests. Also remove the unused encoding/binary import from the core/types file and add it to the test files where needed. * Pass nil options to sim.execute in test * Pass nil as second argument in simulation test * Embed L1 attributes tx in simulator * Handle Optimism genesis without L1 tx * Rename finalTxes to prependedTxes * Remove nil argument from sim.execute calls * Update internal/ethapi/api.go Co-authored-by: kustrun <9192608+kustrun@users.noreply.github.com> --------- Co-authored-by: geoknee <georgeknee@googlemail.com> * Run go run build/ci.go check_generate (ethereum-optimism#741) * Run go run build/ci.go check_generate Unfortunately, the check_generate script doesn't consider eth/ethconfig, so ci can't catch this. * Fix check_generate script and add it to ci * consensus/misc/eip1559: Improve Holocene EIP-1559 params checks (ethereum-optimism#743) * all: reduce diff to upstream (ethereum-optimism#748) --------- Signed-off-by: Delweng <delweng@gmail.com> Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com> Signed-off-by: jsvisa <delweng@gmail.com> Co-authored-by: Felix Lange <fjl@twurst.com> Co-authored-by: wit liu <765765346@qq.com> Co-authored-by: Matus Kysel <MatusKysel@users.noreply.github.com> Co-authored-by: lightclient <lightclient@protonmail.com> Co-authored-by: VolodymyrBg <aqdrgg19@gmail.com> Co-authored-by: MozirDmitriy <dmitriymozir@gmail.com> Co-authored-by: Dragan Milic <dragan@netice9.com> Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com> Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com> Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de> Co-authored-by: cui <cuiweixie@gmail.com> Co-authored-by: Delweng <delweng@gmail.com> Co-authored-by: rjl493456442 <garyrong0905@gmail.com> Co-authored-by: GarmashAlex <garmasholeksii@gmail.com> Co-authored-by: CPerezz <37264926+CPerezz@users.noreply.github.com> Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com> Co-authored-by: futreall <86553580+futreall@users.noreply.github.com> Co-authored-by: Galoretka <galoretochka@gmail.com> Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com> Co-authored-by: Yuan-Yao Sung <sungyuanyao@gmail.com> Co-authored-by: Zach Brown <zach871@proton.me> Co-authored-by: Martin HS <martin@swende.se> Co-authored-by: zzzckck <152148891+zzzckck@users.noreply.github.com> Co-authored-by: hero5512 <lvshuaino@gmail.com> Co-authored-by: Csaba Kiraly <cskiraly@users.noreply.github.com> Co-authored-by: Nikita Mescheryakov <root@nikitam.io> Co-authored-by: sashass1315 <sashass1315@gmail.com> Co-authored-by: Nicolas Gotchac <ngotchac@gmail.com> Co-authored-by: Alexey Osipov <me@flcl.me> Co-authored-by: phrwlk <phrwlk7@gmail.com> Co-authored-by: CertiK <138698582+CertiK-Geth@users.noreply.github.com> Co-authored-by: 10gic <github10gic@proton.me> Co-authored-by: Luke Ma <lukema95@gmail.com> Co-authored-by: Lewis <lewis.kim@kaia.io> Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com> Co-authored-by: Felföldi Zsolt <zsfelfoldi@gmail.com> Co-authored-by: mishraa-G <divyansh.mishra.mec23@itbhu.ac.in> Co-authored-by: George Knee <georgeknee@googlemail.com> Co-authored-by: kustrun <9192608+kustrun@users.noreply.github.com> Co-authored-by: Josh Klopfenstein <git@joshklop.com> Co-authored-by: Sebastian Stammler <seb@oplabs.co> Co-authored-by: Josh Klopfenstein <joshklop@oplabs.co> Co-authored-by: louis.liu <louis.liu@okg.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.