fix(i2c_master): Fix the issue that probe cannot work properly after …

…a general call,

Closes #13547

components/esp_driver_i2c/i2c_master.c

@@ -114,6 +114,18 @@ static esp_err_t s_i2c_hw_fsm_reset(i2c_master_bus_handle_t i2c_master)
     return ESP_OK;
 }
 
+static void s_i2c_err_log_print(i2c_master_event_t event, bool bypass_nack_log)
+{
+    if (event == I2C_EVENT_TIMEOUT) {
+        ESP_LOGE(TAG, "I2C transaction timeout detected");
+    }
+    if (bypass_nack_log != true) {
+        if (event == I2C_EVENT_NACK) {
+            ESP_LOGE(TAG, "I2C transaction unexpected nack detected");
+        }
+    }
+}
+
 //////////////////////////////////////I2C operation functions////////////////////////////////////////////
 /**
  * @brief This function is used to send I2C write command, which is divided in two parts.
@@ -412,6 +424,7 @@ static void s_i2c_send_commands(i2c_master_bus_handle_t i2c_master, TickType_t t
             // Software timeout, clear the command link and finish this transaction.
             i2c_master->cmd_idx = 0;
             i2c_master->trans_idx = 0;
+            atomic_store(&i2c_master->status, I2C_STATUS_TIMEOUT);
             return;
         }
 
@@ -431,6 +444,8 @@ static void s_i2c_send_commands(i2c_master_bus_handle_t i2c_master, TickType_t t
             };
             i2c_ll_master_write_cmd_reg(hal->dev, hw_stop_cmd, 0);
             i2c_hal_master_trans_start(hal);
+            // The master trans start would start a transaction.
+            // Queue wait for the event instead of return directly.
             break;
         }
 
@@ -453,6 +468,7 @@ static void s_i2c_send_commands(i2c_master_bus_handle_t i2c_master, TickType_t t
         if (event == I2C_EVENT_DONE) {
             atomic_store(&i2c_master->status, I2C_STATUS_DONE);
         }
+        s_i2c_err_log_print(event, i2c_master->bypass_nack_log);
     } else {
         i2c_master->cmd_idx = 0;
         i2c_master->trans_idx = 0;
@@ -1115,6 +1131,8 @@ esp_err_t i2c_master_probe(i2c_master_bus_handle_t bus_handle, uint16_t address,
     bus_handle->cmd_idx = 0;
     bus_handle->trans_idx = 0;
     bus_handle->trans_done = false;
+    bus_handle->status = I2C_STATUS_IDLE;
+    bus_handle->bypass_nack_log = true;
     i2c_hal_context_t *hal = &bus_handle->base->hal;
     i2c_operation_t i2c_ops[] = {
         {.hw_cmd = I2C_TRANS_START_COMMAND},
@@ -1147,6 +1165,7 @@ esp_err_t i2c_master_probe(i2c_master_bus_handle_t bus_handle, uint16_t address,
 
     // Reset the status to done, in order not influence next time transaction.
     bus_handle->status = I2C_STATUS_DONE;
+    bus_handle->bypass_nack_log = false;
     i2c_ll_disable_intr_mask(hal->dev, I2C_LL_MASTER_EVENT_INTR);
     xSemaphoreGive(bus_handle->bus_lock_mux);
     return ret;

components/esp_driver_i2c/i2c_private.h

@@ -145,7 +145,8 @@ struct i2c_master_bus_t {
     bool trans_over_buffer;                                          // Data length is more than hardware fifo length, needs interrupt.
     bool async_trans;                                                // asynchronous transaction, true after callback is installed.
     bool ack_check_disable;                                          // Disable ACK check
-    volatile bool trans_done;                                                 // transaction command finish
+    volatile bool trans_done;                                        // transaction command finish
+    bool bypass_nack_log;                                             // Bypass the error log. Sometimes the error is expected.
     SLIST_HEAD(i2c_master_device_list_head, i2c_master_device_list) device_list;      // I2C device (instance) list
     // async trans members
     bool async_break;                                                // break transaction loop flag.

components/esp_driver_i2c/test_apps/i2c_test_apps/main/test_i2c_common.c

@@ -167,6 +167,41 @@ TEST_CASE("I2C master probe device test", "[i2c]")
     TEST_ESP_OK(i2c_del_master_bus(bus_handle));
 }
 
+TEST_CASE("probe test after general call (0x00 0x06)", "[i2c]")
+{
+    uint8_t data_wr[1] = { 0x06 };
+
+    i2c_master_bus_config_t i2c_mst_config = {
+        .clk_source = I2C_CLK_SRC_DEFAULT,
+        .i2c_port = TEST_I2C_PORT,
+        .scl_io_num = I2C_MASTER_SCL_IO,
+        .sda_io_num = I2C_MASTER_SDA_IO,
+        .flags.enable_internal_pullup = true,
+    };
+    i2c_master_bus_handle_t bus_handle;
+
+    TEST_ESP_OK(i2c_new_master_bus(&i2c_mst_config, &bus_handle));
+
+    i2c_device_config_t dev_cfg1 = {
+        .dev_addr_length = I2C_ADDR_BIT_LEN_7,
+        .device_address = 0x00,
+        .scl_speed_hz = 100000,
+    };
+
+    i2c_master_dev_handle_t dev_handle1;
+    TEST_ESP_OK(i2c_master_bus_add_device(bus_handle, &dev_cfg1, &dev_handle1));
+
+    TEST_ESP_ERR(ESP_ERR_INVALID_STATE, i2c_master_transmit(dev_handle1, data_wr, 1, 200));
+
+    for (int i = 1; i < 0x7f; i++) {
+        TEST_ESP_ERR(ESP_ERR_NOT_FOUND, i2c_master_probe(bus_handle, i, 800));
+    }
+
+    TEST_ESP_OK(i2c_master_bus_rm_device(dev_handle1));
+
+    TEST_ESP_OK(i2c_del_master_bus(bus_handle));
+}
+
 #define LENGTH 48
 
 static IRAM_ATTR bool test_master_tx_done_callback(i2c_master_dev_handle_t i2c_dev, const i2c_master_event_data_t *evt_data, void *arg)