Installation

LiteX installation guide

1. Install Python 3.5+ and FPGA vendor's development tools and/or Verilator.
2. Install Migen/LiteX and the LiteX's cores:

$ wget https://raw.githubusercontent.com/enjoy-digital/litex/master/litex_setup.py
$ chmod +x litex_setup.py
$ ./litex_setup.py init install --user (--user to install to user directory)

Later, if you need to update all repositories:

$ ./litex_setup.py update

Note: On MacOS, make sure you have HomeBrew installed. Then do, brew install wget.

Note: On Windows, it's possible you'll have to set SHELL environment variable to SHELL=cmd.exe.

3. Install a RISC-V toolchain (Only if you want to test/create a SoC with a CPU):

$ ./litex_setup.py gcc

4. Build the target of your board...:

Go to litex-boards/litex_boards/targets and execute the target you want to build.

5. ... and/or install Verilator and test LiteX directly on your computer without any FPGA board:

On Linux (Ubuntu):

$ sudo apt install libevent-dev libjson-c-dev verilator
$ lxsim --cpu-type=vexriscv

On MacOS:

$ brew install json-c verilator libevent
$ brew cask install tuntap
$ lxsim --cpu-type=vexriscv

6. Run a terminal program on the board's serial port at 115200 8-N-1.

You should get the BIOS prompt like the one below.